DGSL-12-100-Y3A - Uncategorized Festo - Free user manual and instructions
Find the device manual for free DGSL-12-100-Y3A Festo in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pneumatic Guided Cylinder |
| Series | DGSL |
| Piston Diameter | 12 mm |
| Stroke Length | 100 mm |
| Operating Pressure | 1.5 to 8 bar |
| Working Medium | Compressed air (filtered, unlubricated or lubricated) |
| Maximum Speed | 0.8 m/s |
| Cushioning | Elastomer cushioning (P) |
| Position Sensing | Via proximity switch (slot) |
| Guide | Linear ball bearing guide |
| Operating Temperature | -10°C to 60°C |
| Material | Aluminum, steel, plastic |
| Weight | Approx. 0.5 kg |
| Mounting | Via threaded holes (M4) |
| Pneumatic Connection | G1/8 |
| Maintenance | Clean regularly; check seals and guide wear |
| Safety | Do not exceed max pressure; ensure proper filtration |
| Repairs | Seals and guide bearings replaceable; spare parts available |
| Accessories | Mounting brackets, proximity switches |
| Option Y3A | Integrated guide with slide |
Frequently Asked Questions - DGSL-12-100-Y3A Festo
What is the operating pressure range for the Festo DGSL-12-100-Y3A?
The operating pressure range is 1.5 to 8 bar. Ensure the compressed air is filtered and within this range.
How do I mount the DGSL-12-100-Y3A cylinder?
Mount the cylinder using the threaded holes on the body (M4). Use appropriate screws and ensure alignment. Refer to the manual for torque specifications.
Can I use the cylinder without lubrication?
Yes, the cylinder can operate with unlubricated compressed air, but for extended life, lubrication is recommended. Use approved oils.
What does the Y3A option indicate?
The Y3A option indicates that the cylinder has an integrated guide with a slide, providing precise linear motion without external guides.
What is the maximum speed of the piston?
The maximum recommended speed is 0.8 m/s. Higher speeds may cause premature wear or impact damage.
How do I adjust the cushioning?
The DGSL-12-100-Y3A has elastomer cushioning (P) which is fixed. For adjustable cushioning, consider other variants.
Can I use proximity switches with this cylinder?
Yes, the cylinder is designed for proximity switches that fit into the slot on the body. Festo offers compatible switches.
What maintenance is required?
Regularly clean the guide rods and check for seal wear. Replace seals if leaks occur. Lubricate if used in harsh environments.
What is the weight of the cylinder?
The weight is approximately 0.5 kg, excluding accessories.
Where can I find spare parts?
Spare parts such as seal kits and guide bearings are available from Festo or authorized distributors. Use the product part number.
User questions about DGSL-12-100-Y3A Festo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DGSL-12-100-Y3A - Festo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DGSL-12-100-Y3A by Festo.
USER MANUAL DGSL-12-100-Y3A Festo
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Festo
Model : DGSL-12-100-Y3A
Category : Uncategorized