PDU41116 - Switch CyberPower - Free user manual and instructions
Find the device manual for free PDU41116 CyberPower in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Switched PDU (Power Distribution Unit) |
| Model | PDU41116 |
| Brand | CyberPower |
| Form Factor | 0U Vertical Mount |
| Outlets | 16 x NEMA 5-15R |
| Input Plug | NEMA L5-15P |
| Input Voltage | 120V |
| Maximum Current | 15A |
| Maximum Power | 1800W |
| Dimensions (H x W x D) | 70.0 x 5.0 x 5.0 cm |
| Weight | 2.3 kg |
| Cord Length | 1.8 m |
| Remote Management | SNMP, Web Interface, Telnet |
| Switching Capability | Individual outlet control (on/off/reboot) |
| Monitoring | Voltage, current, power, energy consumption |
| Overload Protection | 15A circuit breaker |
| Operating Temperature | 0°C to 45°C |
| Humidity Range | 5% to 95% non-condensing |
| Installation | Mounting brackets included for rack or wall |
| Maintenance | Wipe with dry cloth; no user-serviceable parts |
| Safety | UL listed, cUL, FCC Class A |
| Warranty | 3 years limited |
Frequently Asked Questions - PDU41116 CyberPower
How do I access the web interface of the PDU41116?
Ensure the PDU is connected to the network. Find its IP address via DHCP or the front panel display. Open a web browser and enter the IP address. The default login credentials are often 'admin'/'admin' but may vary. Refer to the manual for details.
Can I control individual outlets remotely?
Yes, the PDU41116 supports individual outlet switching via the web interface, SNMP, or Telnet. You can turn outlets on, off, or reboot them remotely.
What is the maximum load for this PDU?
The maximum current is 15A and maximum power is 1800W at 120V. Do not exceed these ratings to avoid tripping the circuit breaker.
How do I reset the PDU if it stops responding?
Unplug the power cord from the PDU or the wall outlet, wait 10 seconds, then reconnect. If the issue persists, perform a factory reset via the small reset button on the unit (use a paperclip).
Does the PDU41116 support environmental monitoring?
The PDU itself does not have built-in sensors, but it can connect external environmental sensors (temperature, humidity, etc.) via the optional sensor port (if available). Check the manual for compatibility.
What type of power cord do I need?
The PDU41116 comes with a NEMA L5-15P input plug. You may need a compatible extension or adapter depending on your rack power source.
How do I mount the PDU in a rack?
The PDU includes mounting brackets for vertical mounting in a 19-inch rack. Attach the brackets to the PDU using the provided screws, then secure the PDU to the rack rails.
Can I use the PDU with a UPS?
Yes, the PDU can be connected to a UPS. Ensure the UPS output matches the PDU input rating (120V, 15A). The PDU will distribute power to connected equipment.
What should I do if an outlet stops working?
Check if the outlet is turned off via the web interface. Also, verify that the total load has not tripped the circuit breaker. If the breaker is off, reset it. If the issue persists, contact CyberPower support.
How do I update the firmware?
Download the latest firmware from the CyberPower website. Access the web interface, go to Administration > Firmware Upgrade, upload the file, and follow the on-screen instructions. Do not power off during the update.
User questions about PDU41116 CyberPower
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PDU41116 - CyberPower and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PDU41116 by CyberPower.
USER MANUAL PDU41116 CyberPower
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CyberPower
Model : PDU41116
Category : Switch