Duel Pugilist Distortion - Guitar amplifier FENDER - Free user manual and instructions
Find the device manual for free Duel Pugilist Distortion FENDER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Guitar Distortion Pedal (Stompbox) |
| Brand | Fender |
| Model | Duel Pugilist Distortion |
| Dimensions (approx.) | 7.6 x 12.7 x 5.7 cm (3 x 5 x 2.25 in) |
| Weight (approx.) | 340 g (12 oz) |
| Power Supply | 9V DC (center-negative, 2.1mm barrel) |
| Current Draw | ~50 mA |
| Input | 1/4" mono instrument jack (Tip-Sleeve) |
| Output | 1/4" mono instrument jack (Tip-Sleeve) |
| Controls | Volume, Tone, Distortion (per channel); Blend, Boost |
| Distortion Channels | 2 (Pug A and Pug B) with independent controls |
| Blend Mode | Mix both distortion channels in parallel |
| Boost Function | Additional gain boost switchable via footswitch |
| True Bypass | Yes |
| Indicator LED | Power on/off status |
| Construction | Metal chassis, compact design |
| Maintenance | Clean with a dry cloth; avoid liquids and solvents |
| Safety | Use only specified power supply; do not expose to moisture |
| Spare Parts / Repairability | No user-serviceable parts; contact authorized service center |
| General Information | Designed for electric guitar; suitable for studio and live performance |
Frequently Asked Questions - Duel Pugilist Distortion FENDER
How do I power the Duel Pugilist Distortion?
Use a standard 9V DC power supply with center-negative polarity and a 2.1mm barrel connector. Current draw is approximately 50 mA. Do not use batteries.
Can I use the pedal with a battery?
The Duel Pugilist Distortion does not have a battery compartment. It must be powered via an external 9V DC power supply.
What does the Blend control do?
The Blend control mixes the two distortion channels (Pug A and Pug B) in parallel. Turn clockwise to add more of Channel B, counterclockwise for more Channel A. At center, both channels are equal.
How do I connect the pedal to my guitar and amp?
Connect your guitar to the Input jack using a 1/4" instrument cable. Then connect the Output jack to your amplifier input. Ensure the pedal is powered and bypass is active when not in use.
What is the Boost function for?
The Boost adds an extra gain stage to increase the overall distortion level. Press the Boost footswitch to engage. The LED indicator will light up when active.
How do I achieve a clean blend of distorted and clean signals?
The Duel Pugilist Distortion does not have a clean blend. However, by adjusting the Volume and Distortion controls on each channel, you can create layered distortion textures. For clean blend, consider a parallel effects loop.
Is the pedal true bypass?
Yes, the Duel Pugilist Distortion features true bypass. When the pedal is off, your guitar signal goes directly to the output without any color or buffer.
What type of effects loop should I use?
This pedal is designed to be placed in front of your amplifier (pre-amp). It works best in a mono instrument chain. For stereo or parallel setups, use a mixer or multiple pedals.
Can I use the Duel Pugilist Distortion for bass guitar?
While designed for electric guitar, you can use it with bass. Set Distortion and Tone controls carefully to avoid losing low-end. It may work well for bass overdrive.
How do I clean and maintain the pedal?
Use a soft dry cloth to wipe the exterior. Avoid using water, solvents, or abrasive cleaners. For the jacks, use a contact cleaner occasionally. Keep the pedal in a dry place when not in use.
User questions about Duel Pugilist Distortion FENDER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Guitar amplifier in PDF format for free! Find your manual Duel Pugilist Distortion - FENDER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Duel Pugilist Distortion by FENDER.