DS-K1107AM - Security System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1107AM Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Standalone Access Controller with Keypad & Card Reader |
| Brand | Hikvision |
| Model | DS-K1107AM |
| Dimensions (W x H x D) | 130 mm x 90 mm x 30 mm |
| Weight | 200 g |
| Power Supply | 12 V DC, 500 mA |
| Operating Temperature | -20°C to +60°C |
| Card Type Supported | Mifare (13.56 MHz) |
| User Capacity | Up to 1,000 users |
| Communication Interface | Wiegand, RS485 |
| IP Rating | IP65 (weatherproof) |
| Keypad | 12-key backlit keypad |
| LED Indicators | Red/Green for status |
| Tamper Switch | Yes |
| Reading Distance | Up to 5 cm |
| Security Features | Password protection, anti-passback, tamper alarm |
| Maintenance | Clean outer surface with a dry cloth; avoid liquids |
| Spare Parts & Repairability | No user-serviceable parts; contact authorized service center |
| Included Accessories | Mounting bracket, screws, user manual |
| Compliance | CE, FCC |
Frequently Asked Questions - DS-K1107AM Hikvision
How do I power the DS-K1107AM?
Connect a 12V DC power supply with at least 500 mA. Use the included power adapter or wire directly to a regulated source.
What card types are supported?
The reader supports Mifare (13.56 MHz) contactless smart cards. It is not compatible with 125 kHz cards.
How do I add a new user?
Enter programming mode via the keypad (default PIN: 1234). Then press [*] [5] [1], present a card, and enter the user ID. Refer to the manual for full steps.
What is the maximum number of users?
The device can store up to 1,000 user credentials (cards or PINs).
How do I reset the device to factory defaults?
Power off the device, press and hold the tamper switch while powering on, and wait for the LED to flash amber. Release the switch. The device will reset.
Can I connect it to a PC or security system?
Yes, it supports Wiegand output (26/34 bit) and RS485 for integration with controllers or software.
Is the DS-K1107AM weatherproof?
Yes, it is rated IP65, making it suitable for outdoor use but not submersion.
How do I change the master programming PIN?
Enter programming mode, then press [*] [0] [1]. Enter the current master PIN, then new 4-8 digit PIN, and confirm. Default master PIN is 1234.
What do the LED indicators mean?
Solid green: access granted. Solid red: access denied. Flashing amber: tamper alarm or programming mode.
How do I clean and maintain the device?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners. Check tamper switch regularly.
User questions about DS-K1107AM Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security System in PDF format for free! Find your manual DS-K1107AM - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1107AM by Hikvision.
USER MANUAL DS-K1107AM Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1107AM
Category : Security System