LUXMAN

SQ-N150 - Hi-Fi System LUXMAN - Free user manual and instructions

Find the device manual for free SQ-N150 LUXMAN in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice LUXMAN SQ-N150 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Vacuum Tube Integrated Amplifier
Power Output 15W per channel (Class A/B)
Frequency Response 20Hz – 20kHz (±0.5dB)
Signal-to-Noise Ratio 85 dB
Input Sensitivity 200mV (line)
Input Impedance 47 kΩ (line), 47 kΩ (phono MM)
Phono Stage MM (moving magnet) cartridge compatible
Inputs 3x RCA line, 1x RCA phono
Outputs Speaker terminals (4-16Ω), 1x RCA pre-out
Vacuum Tubes 2x 12AX7 (preamp), 4x EL84 (power amp)
Dimensions (W x H x D) 300 x 150 x 200 mm
Weight 8.0 kg
Power Supply 100-240V AC, 50/60Hz
Power Consumption 150W
Functions Volume, Source Select, Balance, Bass/Treble Tone Controls
Maintenance Periodic tube replacement; clean exterior with dry, soft cloth
Safety Do not open chassis; avoid moisture; use grounded power outlet
Spare Parts & Repairability Tubes available through Luxman dealers; serviceable by qualified technicians
General Information Handcrafted in Japan; includes 2-year warranty

Frequently Asked Questions - SQ-N150 LUXMAN

How often should I replace the vacuum tubes?
Power tubes (EL84) typically last 2000-3000 hours; preamp tubes (12AX7) last longer. Replace when you notice reduced sound quality or distortion.
Can I use the SQ-N150 as a headphone amplifier?
No, the SQ-N150 does not have a dedicated headphone output. Use the pre-out with an external headphone amp.
Is there a remote control included?
No, the SQ-N150 is a manual-only unit with front-panel controls.
What type of speakers are recommended?
Speakers with an impedance of 4-8 ohms and sensitivity of 87dB or higher work best with the 15W output.
Does it have a built-in phono preamp?
Yes, the SQ-N150 includes a built-in MM phono stage for turntables with moving magnet cartridges.
Can I bi-wire my speakers?
The amplifier has one set of speaker terminals. Bi-wiring is not supported unless your speakers have a single pair of inputs.
What is the warranty period?
Luxman offers a 2-year warranty from the original purchase date.
How do I clean the amplifier?
Turn off and unplug. Use a soft, dry cloth to remove dust. Avoid liquids and abrasives.
Is the SQ-N150 compatible with 100V regions?
Yes, the power supply is auto-ranging from 100V to 240V AC.
Can I use EL34 tubes instead of EL84?
No, the circuit is designed specifically for EL84 tubes. Do not substitute different tube types.

User questions about SQ-N150 LUXMAN

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hi-Fi System in PDF format for free! Find your manual SQ-N150 - LUXMAN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SQ-N150 by LUXMAN.

USER MANUAL SQ-N150 LUXMAN

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : LUXMAN

Model : SQ-N150

Category : Hi-Fi System