V350C - Flash GODOX - Free user manual and instructions
Find the device manual for free V350C GODOX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speedlite Flash for Canon Cameras |
| Model | Godox V350C |
| Guide Number | 36 (ISO 100, 105mm) |
| Zoom Range | 24–105mm (auto, manual) |
| Wireless System | Godox X 2.4G wireless (master/slave) |
| TTL Support | Yes (Canon i-TTL) |
| High-Speed Sync (HSS) | Yes, up to 1/8000s |
| Recycling Time | Approx. 0.1–1.5 seconds |
| Number of Flashes | Approx. 210 at full power |
| Flash Duration | 1/300 to 1/20000 sec |
| Power Source | Built-in rechargeable lithium battery (7.2V 2600mAh) |
| Battery Life | Approx. 500 full-power flashes |
| Charging Time | Approx. 2.5 hours (using included charger) |
| Dimensions (W x H x D) | 64 x 70 x 115 mm |
| Weight | Approx. 210 g (without battery) |
| Bounce Range | Vertical: -9° to +90°, Horizontal: 0° to 180° |
| Color Temperature | 5600K ±200K |
| Modeling Flash | Yes (virtual modeling) |
| Maintenance | Wipe with a soft dry cloth; avoid moisture and dust |
| Safety | Do not disassemble or expose to liquids; avoid overheating |
| Spare Parts & Repairability | Battery, charger, and flash tube available; repairable by authorized service |
| Compatibility | Canon EOS series with hot shoe |
Frequently Asked Questions - V350C GODOX
How do I attach the V350C to my camera?
Slide the flash into the camera's hot shoe until it locks. Use the lock lever to secure it. Ensure the camera is off during attachment.
How do I turn on the flash?
Press and hold the power button for about 2 seconds. The LCD will light up. To turn off, press and hold again.
How can I use the flash wirelessly?
Set the flash to slave mode via the wireless menu. Use a compatible Godox X transmitter on the camera. The flash will trigger automatically when fired.
How do I charge the V350C battery?
Use the included USB charger. Plug the charger into the flash's charging port. The LED indicator shows charging status. Full charge takes about 2.5 hours.
What does the LED on the flash indicate?
The LED is green when the flash is ready (fully charged). It flashes red during recycling. A steady red indicates low battery or error.
How do I clean the flash?
Wipe the exterior with a soft, dry cloth. Do not use liquids or abrasives. Clean the battery contacts gently if needed.
Can I use the flash with other brands?
The V350C is designed specifically for Canon cameras. For other brands, consider the V350S (Sony) or V350N (Nikon) versions.
How do I reset the flash to factory settings?
Press the 'Menu' button, navigate to 'Reset', and confirm. Alternatively, remove and reinsert the battery after a few minutes.
What should I do if the flash stops working?
Check battery charge, clean contacts, and ensure proper mounting. If issues persist, contact Godox support or an authorized service center.
How many flashes can I get per charge?
Approximately 210 full-power flashes or up to 500 at lower power settings. Actual number varies with usage.
User questions about V350C GODOX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flash in PDF format for free! Find your manual V350C - GODOX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V350C by GODOX.
USER MANUAL V350C GODOX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : GODOX
Model : V350C
Category : Flash