FMB003 - GPS device Teltonika - Free user manual and instructions
Find the device manual for free FMB003 Teltonika in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | GPS Tracking Device |
| Brand | Teltonika |
| Model | FMB003 |
| Dimensions | 65 x 56 x 22 mm |
| Weight | 65 g |
| Power Supply | 10-30 V DC |
| Battery | Internal Li-ion 360 mAh (backup) |
| GPS Technology | GNSS (GPS, GLONASS, Galileo, BeiDou) |
| Communication | 2G (GSM/GPRS) or 4G (LTE) depending on variant |
| Main Functions | Real-time tracking, geofencing, over-speed alerts, ignition detection, remote immobilization |
| Inputs/Outputs | 2 digital inputs, 1 output, 1 analog input |
| Operating Temperature | -40 °C to +85 °C |
| Waterproof Rating | IP54 |
| Memory | 128 MB flash memory |
| Installation | Professional installation recommended; connect to vehicle power and ignition |
| Maintenance & Cleaning | Wipe with dry cloth; avoid moisture and solvents |
| Safety Certifications | CE, FCC, RoHS |
| Spare Parts & Repairability | Contact Teltonika support for replacement parts; device is not user-serviceable |
| Warranty | 2 years manufacturer warranty |
| General Information | Designed for vehicle fleet management; requires active SIM card with data plan |
Frequently Asked Questions - FMB003 Teltonika
How to install the Teltonika FMB003?
The FMB003 should be installed by a qualified technician. Connect the power wires (red to +12V/24V, black to ground), ignition wire to ignition signal, and optional inputs/outputs as needed. Secure the device in a hidden location inside the vehicle using double-sided tape or screws. Ensure the GPS antenna has a clear view of the sky.
What is the default IP address of the FMB003?
The default IP address is 192.168.1.1 when using the device in configuration mode. You can access the configuration interface via Ethernet or USB connection. For remote access, the device uses the server IP configured in the settings.
How to configure the FMB003 for tracking?
Use Teltonika Configurator software (available for download). Connect the device via USB or Bluetooth, set the server IP/port, data acquisition parameters, and geofencing rules. Save configuration and reboot the device. Ensure the SIM card has sufficient data balance.
What type of SIM card does the FMB003 require?
The device uses a standard 2G/3G/4G SIM card (depending on the variant). It requires a mini SIM (2FF). Make sure the SIM is unlocked and has data capabilities. For 2G variants, the network must support 2G (GSM).
How to reset the FMB003 to factory settings?
Press and hold the reset button (located near the SIM slot) for 10 seconds while the device is powered on. Alternatively, use the Configurator software to perform a factory reset. The device will reboot with default settings.
Why is my FMB003 not reporting location?
Check power supply (LED indicators), SIM card status, and antenna connection. Ensure the device has a good GPS fix (red LED blinking). Verify that the server IP and port are correctly configured. Check firewall settings. If still not working, try a different SIM card or contact support.
Can I use the FMB003 with any tracking platform?
Yes, the FMB003 supports standard GPS tracking protocols (like TCP, UDP, or HTTP). You can configure it to send data to any server that supports these protocols. Teltonika also offers their own platform (Fleet Management) or you can use third-party platforms like Wialon, Traccar, etc.
What is the maximum number of geofences supported?
The FMB003 supports up to 255 geofences. Each geofence can be configured as a circle or polygon. You can set different actions for entry/exit events.
How to update the firmware on FMB003?
Download the latest firmware from the Teltonika website. Connect the device via USB or Bluetooth to the Configurator software. Go to the firmware update section, select the firmware file, and start the update. Do not power off during the process. The device will reboot automatically.
Does the FMB003 support an external antenna?
Yes, the device has an external GPS antenna connector (SMA). You can use a magnetic mount antenna for better reception, especially if the device is installed in a metal enclosure. The GSM antenna is internal.
User questions about FMB003 Teltonika
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your GPS device in PDF format for free! Find your manual FMB003 - Teltonika and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FMB003 by Teltonika.
USER MANUAL FMB003 Teltonika
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Teltonika
Model : FMB003
Category : GPS device