HDS100 - Multimeter Owon - Free user manual and instructions
Find the device manual for free HDS100 Owon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Oscilloscope Multimeter |
| Brand | Owon |
| Model | HDS100 |
| Display | 3.5-inch TFT LCD color display |
| Oscilloscope Bandwidth | 100 MHz |
| Sampling Rate | 1 GSa/s |
| Number of Channels | 2 |
| Multimeter Functions | AC/DC Voltage, Current, Resistance, Capacitance, Frequency, Diode, Continuity |
| Voltage Range | Up to 600V (DC/AC) |
| Current Range | Up to 10A |
| Resistance Range | Up to 40 MΩ |
| Capacitance Range | Up to 400 µF |
| Frequency Range | Up to 100 MHz |
| Power Supply | Rechargeable Li-ion battery (4000mAh) |
| Battery Life | Approximately 6 hours |
| Dimensions | 180 x 90 x 50 mm (approx) |
| Weight | 400 g (approx) |
| Connectivity | USB port for PC communication |
| Data Storage | Internal memory for waveform and data |
| Safety Rating | CAT II 600V |
| Accessories | Test leads, probes, USB cable, power adapter, user manual |
| Maintenance | Clean with dry cloth, avoid moisture |
| Spare Parts | Replacement test leads, probes, battery |
| Manual Language | English |
Frequently Asked Questions - HDS100 Owon
How to measure AC voltage?
Turn the rotary switch to the AC voltage position (V~). Connect the black test lead to COM and red to VΩ. Touch probes to the circuit. Read the display.
How to use the oscilloscope function?
Press the OSC button to enter oscilloscope mode. Use the CH1 and CH2 inputs. Adjust time/div and volts/div using the knobs. Press Auto for automatic setup.
How to calibrate the multimeter?
The HDS100 is factory calibrated. To perform a user calibration, short the test leads and rotate the switch to V. Press and hold the REL button until zero appears.
How to replace the battery?
Turn off the device and disconnect all probes. Remove the screw on the battery cover. Replace the Li-ion battery with the same type (3.7V). Reattach the cover and screw.
What is the bandwidth of the oscilloscope?
The oscilloscope has a 100 MHz bandwidth. This means it can measure signals up to 100 MHz with minimal attenuation.
Can it measure capacitance?
Yes, it can measure capacitance up to 400 µF. Turn the rotary switch to the capacitance symbol (‑|‑). Insert the capacitor into the dedicated socket or use test leads.
How to update firmware?
Download the latest firmware from the Owon website. Connect the device to a PC via USB and run the update tool. Follow on-screen instructions. Do not disconnect during update.
What are the safety precautions?
Always use the device within its CAT II 600V rating. Never exceed the maximum input limits. Inspect leads for damage. Do not use in wet or explosive environments.
How to connect to PC?
Use the provided USB cable to connect the HDS100 to a PC. Install the software from the included CD or website. The device will appear as a virtual instrument.
How to clean the device?
Turn off the device and remove all leads. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasives. Keep the input terminals clean.
User questions about HDS100 Owon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual HDS100 - Owon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDS100 by Owon.
USER MANUAL HDS100 Owon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Owon
Model : HDS100
Category : Multimeter