XTR III - Uncategorized Burris - Free user manual and instructions
Find the device manual for free XTR III Burris in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rifle Scope |
| Magnification Range | 3-15x |
| Objective Lens Diameter | 50mm |
| Tube Diameter | 30mm |
| Reticle | Double Dot (MOA or MRAD) |
| Focal Plane | Second Focal Plane |
| Adjustment Type | 1/4 MOA or 0.1 MRAD (user selectable) |
| Adjustment Range | 60 MOA total elevation and windage |
| Parallax Setting | 10 yards to infinity |
| Eye Relief | 3.5 to 4.0 inches |
| Field of View at 100 yds | 10.5 ft at 3x, 3.5 ft at 15x |
| Length | 13.5 inches |
| Weight | 22.5 ounces |
| Waterproof / Fogproof | Yes (nitrogen purged, O-ring sealed) |
| Operating Temperature | -20°F to +120°F (-30°C to +50°C) |
| Warranty | Lifetime (Burris Forever Warranty) |
| Finish | Matte black |
| Cleaning Instructions | Use lens brush and microfiber cloth; avoid solvents |
| Mounting Recommendations | Use quality picatinny/weaver rings; torque to 15-20 in-lbs |
| Repairability | Serviceable by Burris; replacement parts available |
Frequently Asked Questions - XTR III Burris
How do I zero my XTR III scope?
Set the scope on a stable rest or tripod at the desired range (commonly 100 yards). Adjust windage and elevation turrets to bring point of aim to point of impact. Each click typically moves 1/4 MOA or 0.1 MRAD. After zeroing, reset the turret dials to 0 by loosening the set screws.
What is the best way to clean the lenses?
Use a lens brush to remove dust, then apply a microfiber cloth with a small amount of lens cleaning solution. Avoid paper towels or abrasive materials. Do not disassemble the scope for cleaning.
How do I mount the XTR III on my rifle?
Use quality mounting rings (30mm tube diameter). Clean the scope tube and ring surfaces. Place the scope in the lower rings, align, and torque to manufacturer's specifications (typically 15-20 in-lbs). Ensure proper eye relief and level before final tightening.
Can I use this scope for hunting?
Yes, the XTR III is suitable for hunting due to its rugged construction, wide magnification range, and excellent low-light performance. Its waterproof and fogproof design ensures reliability in harsh conditions.
How do I adjust the parallax?
Rotate the parallax knob located on the left side of the objective bell. Set it to match the distance to your target. For ranges beyond 100 yards, typically set to infinity. Verify by moving your eye slightly; if the reticle stays on target, parallax is correct.
What type of reticle does the XTR III have?
The XTR III often features a Double Dot reticle available in either MOA or MRAD versions. It has holdover points for windage and elevation, useful for long-range shooting.
Is the Burris XTR III covered by a warranty?
Yes, Burris offers a Forever Warranty. It covers defects in materials and workmanship for the life of the product. Register your scope on the Burris website for warranty service.
What is the difference between MOA and MRAD adjustments?
MOA (Minute of Angle) and MRAD (Milliradian) are angular measurement units. 1 MOA ≈ 1 inch at 100 yards, while 1 MRAD ≈ 3.6 inches at 100 yards. The XTR III allows you to select the adjustment system via internal components (confirm with manual).
How can I replace the battery on an illuminated XTR III?
If your XTR III has an illuminated reticle, remove the battery cap located on the top of the turret housing (usually the elevation turret). Insert a CR2032 battery with positive side up. Replace cap and test illumination.
What do the numbers on the magnification ring mean?
The numbers indicate the magnification power. For example, at '3' the target appears 3x closer, and at '15' it appears 15x closer. Turning the ring changes the zoom level. Adjust as needed for the shooting distance.
User questions about XTR III Burris
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual XTR III - Burris and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XTR III by Burris.
USER MANUAL XTR III Burris
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Burris
Model : XTR III
Category : Uncategorized