Trabon 24B496 - Uncategorized GRACO - Free user manual and instructions
Find the device manual for free Trabon 24B496 GRACO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Lubrication System |
| Model | Trabon 24B496 |
| Brand | Graco |
| Power Supply | 24 VDC |
| Reservoir Capacity | 4 liters |
| Output Ports | 8 outlets |
| Maximum Pressure | 3000 psi |
| Operating Temperature Range | -20°C to 60°C |
| Dimensions (L x W x H) | 12 x 8 x 6 inches |
| Weight | 15 lbs |
| Material | Aluminum and steel |
| Control Type | Microprocessor-based |
| Display | LCD screen |
| Pump Type | Piston pump |
| Lubricant Compatibility | Grease or oil |
| Cycle Time Adjustment | Adjustable |
| Alarms | Low level and fault alarms |
| Communication | Optional remote monitoring |
| Maintenance | Regular inspection of pump and lines |
| Safety Features | Overload protection |
| Warranty | 1 year |
| Included Accessories | Installation kit, manual |
Frequently Asked Questions - Trabon 24B496 GRACO
What type of lubricant should I use with the Graco Trabon 24B496?
Use a high-quality grease or oil recommended by Graco. The system is compatible with NLGI #0 to #2 greases and ISO 32 to 220 oils. Always check the lubricant viscosity for proper pump operation.
How do I install the Trabon 24B496 lubrication system?
Mount the unit securely using the provided bracket. Connect the power supply (24 VDC) and the output lines to the lubrication points. Refer to the manual for specific wiring and plumbing instructions.
How do I set the cycle time for lubrication?
Cycle time is adjustable via the control panel. Use the up/down buttons to set the interval (e.g., every 30 minutes) and the duration (e.g., 5 seconds). Confirm settings by pressing the 'Enter' button.
What do the alarm indicators mean?
A low-level alarm indicates the reservoir is nearly empty. A fault alarm signals a blockage or pump failure. Check the lubricant level and inspect the lines for clogs. Refer to the troubleshooting section in the manual.
Can I use the 24B496 in outdoor or wet environments?
The unit is designed for industrial indoor use. If used outdoors, protect it from direct rain and extreme temperatures. The operating temperature range is -20°C to 60°C.
How often should I perform maintenance on the Trabon 24B496?
Inspect the system monthly for leaks, worn parts, and proper lubricant levels. Replace the filter every 6 months. Every year, service the pump and check the electronics for corrosion.
What is the maximum number of lubrication points this system can serve?
The standard unit has 8 output ports. Each port can serve one lubrication point. For more points, you can use a manifold divider, but the pump capacity may limit the total.
How do I reset the system after a fault alarm?
Clear the fault by pressing the 'Reset' button on the control panel. If the fault persists, check for blockages, correct wiring, and ensure the pump is not overloaded. Refer to the manual for detailed fault codes.
Is the Graco Trabon 24B496 compatible with remote monitoring systems?
Yes, it supports optional remote monitoring via a relay output or Modbus communication. An external module may be required. Contact Graco for compatible accessories.
What should I do if the pump runs but no lubricant is dispensed?
Check the reservoir level first. Then inspect the suction line and filter for clogs. Air in the system can also cause this; prime the pump by manually operating it. If the problem continues, the pump may need replacement.
User questions about Trabon 24B496 GRACO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Trabon 24B496 - GRACO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Trabon 24B496 by GRACO.