KUMO 3232 - Router AJA - Free user manual and instructions
Find the device manual for free KUMO 3232 AJA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 3G-SDI Router |
| Model | KUMO 3232 |
| Dimensions (W x D x H) | 19 x 12 x 1.75 inches (rack unit) |
| Weight | Approximately 10 lbs (4.5 kg) |
| Power Supply | 100-240 VAC, 50/60 Hz, redundant inputs |
| Signal Format | SD-SDI, HD-SDI, 3G-SDI |
| Number of Inputs | 32 |
| Number of Outputs | 32 |
| Control Interface | Ethernet, RS-422, GPI |
| Cooling | Fan-cooled with rear exhaust |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Mounting | 19-inch rackmount |
| Main Functions | Signal routing, crosspoint switching, status monitoring |
| Maintenance | Clean with dry cloth; check fans and filters periodically |
| Safety | Use grounded outlet; avoid liquids; ensure proper ventilation |
| Spare Parts | Power supply modules, fan units, rear connector panels |
| Repairability | Field-replaceable modules; firmware updates via web interface |
| General Information | AJA KUMO 3232 is a compact 32x32 3G-SDI router for broadcast and pro AV |
Frequently Asked Questions - KUMO 3232 AJA
How do I connect the KUMO 3232 to my network?
Connect an Ethernet cable from the CONTROL port on the rear panel to your network switch. Ensure the router obtains an IP address via DHCP or assign a static IP through the front panel menu.
What is the default IP address of the KUMO 3232?
The default IP address is 192.168.0.2. You can change it via the front panel or web interface.
How do I perform a factory reset?
Press and hold the SEL button on the front panel while powering on the unit. Hold until the front panel displays 'FACTORY RESET'.
Can I control the router remotely?
Yes, via the integrated web server, AJA's KUMO Control software, or third-party controllers using the KUMO Protocol over UDP or TCP.
What video formats are supported?
The KUMO 3232 supports SD-SDI (270 Mb/s), HD-SDI (1.5 Gb/s), and 3G-SDI (3 Gb/s) formats, including embedded audio and timecode.
How do I route a source to a destination?
Use the front panel buttons: press the DST button, select the destination by pressing the corresponding numbered button, then press the SRC button and select the source. The crosspoint will switch.
Why is no video appearing on my output?
Check that the input source is active and connected. Verify the output cable and monitor. Try a different output. Use the front panel to confirm the crosspoint is set correctly.
How do I update firmware?
Download the latest firmware from the AJA website. Access the web interface, go to Admin > Firmware Update, upload the file, and follow on-screen instructions. Do not power off during update.
What is the maximum cable length for 3G-SDI?
For 3G-SDI, use Belden 1694A or equivalent cables up to 100 meters. Longer distances may require equalization or repeaters.
Can I save and recall router presets?
Yes, up to 64 presets can be stored via the front panel or web interface. Use the PRESET button to save or recall configurations.
User questions about KUMO 3232 AJA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual KUMO 3232 - AJA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KUMO 3232 by AJA.
USER MANUAL KUMO 3232 AJA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AJA
Model : KUMO 3232
Category : Router