EWAT350B-SSC1 - Air Conditioning DAIKIN - Free user manual and instructions
Find the device manual for free EWAT350B-SSC1 DAIKIN in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Air-Cooled Scroll Chiller |
| Model | EWAT350B-SSC1 |
| Brand | Daikin |
| Cooling Capacity | Approx. 350 kW (nominal) |
| Refrigerant | R-410A |
| Compressor Type | Scroll (hermetic) |
| Power Supply | 400V / 3-phase / 50Hz |
| Dimensions (W x D x H) | Approx. 3000 x 1200 x 2000 mm |
| Weight | Approx. 2000 kg |
| Noise Level | Approx. 75 dB(A) typical |
| Main Functions | Chilled water production, built-in pump, smart controller, fault diagnostics |
| Maintenance | Clean condenser coils, check filters, inspect electrical connections annually |
| Safety Features | High/low pressure switches, freeze protection, overcurrent protection, emergency stop |
| Spare Parts & Repairability | Replaceable compressors, fans, sensors, control board; Daikin authorized service |
| General Info | Commercial chiller for HVAC applications, outdoor installation, CE certified |
Frequently Asked Questions - EWAT350B-SSC1 DAIKIN
What is the cooling capacity of the Daikin EWAT350B-SSC1?
The nominal cooling capacity is approximately 350 kW under standard conditions (ambient 35°C, leaving water 7°C).
What type of refrigerant does this chiller use?
It uses R-410A refrigerant, which is a high-pressure HFC blend.
What are the power requirements for the EWAT350B-SSC1?
It requires a 400V, 3-phase, 50Hz power supply. Check the nameplate for precise amperage.
How do I start the chiller for the first time?
Ensure power is connected, water flow is established, and all safety devices are reset. Refer to the user manual for detailed startup sequence.
What does error code E1 mean on the display?
Error E1 typically indicates a high-pressure switch trip. Check for blocked condenser, fan failure, or overcharge of refrigerant.
How often should I clean the condenser coils?
Clean the coils at least once a year, or more frequently in dusty environments, to maintain efficiency.
Can I install this chiller indoors?
No, the EWAT350B-SSC1 is designed for outdoor installation only. Indoor installation requires adequate ventilation and is not recommended.
What is the weight of the unit?
The approximate weight is 2000 kg. Ensure the installation surface can support this load.
Where can I find spare parts for this chiller?
Contact a Daikin authorized distributor or service center. Provide the model and serial number for accurate parts.
How to reset the chiller after a fault?
Press the reset button on the control panel after correcting the fault condition. Some resets may require power cycling.
User questions about EWAT350B-SSC1 DAIKIN
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual EWAT350B-SSC1 - DAIKIN and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWAT350B-SSC1 by DAIKIN.