DC27 - Vacuum Cleaner DYSON - Free user manual and instructions
Find the device manual for free DC27 DYSON in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Upright Vacuum Cleaner |
| Brand | Dyson |
| Model | DC27 |
| Colour | Yellow/Grey |
| Motor Power | 1200 W |
| Vacuum Type | Bagless |
| Cyclone Technology | Root Cyclone |
| Filtration | Lifetime HEPA filter |
| Dust Capacity | 2.0 litres |
| Cleaning Path Width | 30 cm |
| Cord Length | 10 m |
| Reach | Up to 12 m (with hose) |
| Weight | 7.5 kg |
| Dimensions (HxWxD) | 115 x 30 x 34 cm |
| Noise Level | 80 dB |
| Power Cord Type | Retractable |
| Brush Control | On/Off |
| Handle | Ergonomic |
| Warranty | 5 years |
| What's in the Box | Vacuum, crevice tool, combination tool, stair tool |
| Maintenance | Washable filter (every 6 months) |
| Reparability | Self-cleaning filter, easy to empty bin |
Frequently Asked Questions - DC27 DYSON
How do I empty the dustbin?
To empty the dustbin, press the bin release button on the handle and pull the bin away. Hold the bin over a trash can and press the bottom release button to open the base. Tap the bin to empty debris. Do not use water or detergents.
How do I clean the filter?
The lifetime HEPA filter should be washed every 6 months. Remove the filter by twisting it off the top of the machine. Rinse it under cold tap water until the water runs clear, gently squeezing it. Allow it to dry completely for at least 24 hours before reinstalling.
How do I replace the brush bar?
To replace the brush bar, disconnect the vacuum from power. Use a coin to unscrew the end cap of the brush bar housing. Slide the old brush bar out and insert the new one. Secure the end cap back in place. Ensure no blockages in the brush bar area.
Why is the vacuum losing suction?
Loss of suction is often due to blockages in the hose or wand, a full dustbin, or a dirty filter. Check for obstructions in the hose by straightening it and looking for clogs. Empty the dustbin if full, and wash the filter if it's dirty.
How do I assemble the vacuum?
Attach the wand to the main body until it clicks. Insert the handle into the top of the wand. Secure the hose by clipping it into the hose clips. Attach the desired tool to the end of the hose or wand.
What tools are included?
The Dyson DC27 comes with a crevice tool for tight spaces, a combination tool (dusting brush and upholstery nozzle), and a stair tool for cleaning steps.
How do I troubleshoot blockages?
Check for blockages in the hose, wand, and brush bar area. Straighten the hose and look for clogs. Remove the wand and inspect it. For brush bar blockages, remove the brush bar and clear debris. Refer to the manual for detailed instructions.
Can I use it on hardwood floors?
Yes, you can use the DC27 on hardwood floors. It has a brush control on/off switch. Turn off the brush bar when cleaning hard floors to avoid scattering debris.
How often should I wash the filter?
Wash the lifetime HEPA filter every 6 months under normal use. If you use the vacuum frequently, you may need to wash it more often. Always allow the filter to dry completely for at least 24 hours before reinstalling.
Where is the serial number?
The serial number is located on the back or underside of the vacuum body. It is on a sticker that also contains the model number and manufacturer details. You may need to remove the dustbin to see it.
User questions about DC27 DYSON
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual DC27 - DYSON and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DC27 by DYSON.
USER MANUAL DC27 DYSON
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DYSON
Model : DC27
Category : Vacuum Cleaner