LIVOO

TEA259 - Compressor LIVOO - Free user manual and instructions

Find the device manual for free TEA259 LIVOO in PDF.

📄 5 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice LIVOO TEA259 - page 2
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Compressor
Brand Livoo
Model TEA259
Power Source 230V ~ 50Hz
Power Consumption 100 W
Maximum Pressure 8 bar (116 psi)
Air Flow Rate 20 L/min
Tank Capacity 6 L
Dimensions (L x W x H) 28 x 14 x 24 cm
Weight 3.5 kg
Cable Length 1.5 m
Noise Level 75 dB(A)
Operating Temperature 5°C to 40°C
Material Steel tank, plastic casing
Safety Features Thermal overload protection, pressure relief valve
Included Accessories Air hose, adapters, needle, nozzle
Usage Inflating tires, sports equipment, airbrushing
Maintenance Drain tank after use, check oil level (if applicable)
Repairability Spare parts available from manufacturer

Frequently Asked Questions - TEA259 LIVOO

How do I start the compressor?
Make sure the power cord is plugged into a grounded outlet. Turn the on/off switch to the 'I' position. The compressor will start automatically and stop when the tank pressure reaches the maximum.
What is the maximum pressure of the Livoo TEA259?
The maximum pressure is 8 bar (116 psi). Do not exceed this limit to avoid damage or injury.
How do I adjust the output pressure?
Use the pressure regulator knob on the front panel. Turn clockwise to increase pressure and counterclockwise to decrease. The gauge shows the current output pressure.
Can I use the compressor for painting?
Yes, with the appropriate airbrush or spray gun. Ensure the air flow is sufficient and use a moisture filter if needed.
How often should I drain the tank?
Drain the tank after each use or daily if used frequently. Open the drain valve at the bottom to release condensed water and prevent corrosion.
What does the thermal overload protection do?
It automatically shuts off the compressor if the motor overheats, preventing damage. Let it cool down before restarting.
Why is the compressor not building pressure?
Check for leaks in the hose or connections. Ensure the tank drain valve is closed. If the problem persists, the check valve may be faulty.
Can I use an extension cord?
Yes, but use a heavy-duty cord rated for at least 15 amps and keep it as short as possible to avoid voltage drop.
Where can I find spare parts for the TEA259?
Spare parts are available from Livoo authorized service centers or online. Contact customer support for specific parts.
What maintenance does the compressor require?
Regularly drain the tank, clean the air filter, and check the oil level (if applicable). For oil-free models, no oil change is needed.

User questions about TEA259 LIVOO

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Compressor in PDF format for free! Find your manual TEA259 - LIVOO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TEA259 by LIVOO.

USER MANUAL TEA259 LIVOO

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : LIVOO

Model : TEA259

Category : Compressor