AS3302T - Server Asustor - Free user manual and instructions
Find the device manual for free AS3302T Asustor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 2-Bay NAS Server |
| Model | AS3302T |
| Brand | Asustor |
| Processor | Intel Celeron J4025 (2.0 GHz, burst up to 2.9 GHz) |
| Memory | 2 GB DDR4 SO-DIMM (expandable up to 8 GB) |
| Drive Bays | 2x 3.5-inch SATA III (6 Gbps) or 2.5-inch |
| Maximum Raw Capacity | 36 TB (2x 18 TB HDD) |
| LAN Ports | 2x Gigabit Ethernet (RJ-45) |
| USB Ports | 2x USB 3.2 Gen 1 (Type-A), 1x USB 2.0 |
| Dimensions (H x W x D) | 165 x 105 x 230 mm (6.5 x 4.13 x 9.06 in) |
| Weight (without drives) | 1.6 kg (3.53 lbs) |
| Power Supply | External, 65W AC adapter |
| Power Consumption (Operation) | Approx. 17.6 W |
| Power Consumption (Sleep) | Approx. 0.5 W |
| Supported RAID Levels | Single, JBOD, RAID 0, RAID 1 |
| Operating System | ADM (Asustor Data Master) |
| File Sharing Protocols | SMB, AFP, NFS, FTP, WebDAV |
| Safety Certification | CE, FCC, UL, VCCI, BSMI |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 95% non-condensing |
| Warranty | 3 years limited |
Frequently Asked Questions - AS3302T Asustor
How do I access the AS3302T for the first time?
Connect the NAS to your network and power it on. Open a browser and go to http://asusator.local:8000 or use the ADM Finder utility to locate the device. Follow the setup wizard.
What RAID configuration should I use?
For data redundancy, use RAID 1 (mirroring). For maximum capacity, use JBOD or RAID 0 (but without redundancy). Single drive mode is also available.
Can I upgrade the RAM?
Yes, the AS3302T has a single SODIMM slot and supports up to 8 GB DDR4. You can replace the existing 2 GB module.
How to install hard drives?
Slide open the front cover, pull out the drive tray, secure the hard drive with screws, and push the tray back in until it clicks. Refer to the manual for proper orientation.
Does the AS3302T support external USB drives?
Yes, it has two USB 3.2 Gen 1 ports and one USB 2.0 port for connecting external storage or other peripherals.
How to reset the NAS to factory settings?
Press and hold the reset button on the rear panel for 10 seconds until you hear a beep. This will reset the admin password and network settings.
Can I access files remotely?
Yes, enable Cloud Connect via ADM or use the Asustor EZ-Connect service. You can also set up FTP or VPN for remote access.
What apps are available for the AS3302T?
ADM supports many apps like Plex Media Server, Surveillance Center, Photo Gallery, and various backup tools. You can install them from the App Central store.
How to replace a failed hard drive?
In RAID 1, you can hot-swap the failed drive: remove it, insert a new drive of equal or larger size, and rebuild the RAID from the ADM interface.
What is the default admin username and password?
The default username is admin and the default password is admin. It is strongly recommended to change the password upon first login.
User questions about AS3302T Asustor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual AS3302T - Asustor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AS3302T by Asustor.
USER MANUAL AS3302T Asustor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Asustor
Model : AS3302T
Category : Server