ME10 - Wi-Fi repeater MERCUSYS - Free user manual and instructions
Find the device manual for free ME10 MERCUSYS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wi-Fi Repeater / Range Extender |
| Brand | Mercusys |
| Model | ME10 |
| Wireless Standards | IEEE 802.11 b/g/n (2.4 GHz only) |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Speed | Up to 300 Mbps |
| Ethernet Ports | 1 x 10/100 Mbps RJ45 |
| Power Input | 5V DC, 1A (micro USB) |
| Dimensions | 75 x 62 x 35 mm |
| Weight | Approx. 50 g |
| LED Indicators | Power, Signal Strength, Ethernet |
| Wireless Security | WPA/WPA2-PSK, WEP |
| Setup Methods | WPS button, Web UI (http://mwlogin.net) |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% non-condensing |
| Certifications | CE, RoHS |
| Package Contents | ME10, Ethernet cable, Quick Installation Guide |
| Maintenance | Keep dry, avoid dust, clean with dry cloth |
| Repairability | Not user-serviceable; contact support for issues |
Frequently Asked Questions - ME10 MERCUSYS
How do I set up the Mercusys ME10 Wi-Fi repeater?
You can set it up using the WPS button (press WPS on your router, then on the extender) or via the web interface at http://mwlogin.net. Follow the on-screen instructions to connect to your existing Wi-Fi network.
What should I do if the extender doesn't connect to my router?
Ensure the extender is within range of your router. Try resetting the extender using a pin to press the reset hole for 5 seconds. Then reattempt setup using WPS or the web interface.
Can I use the ME10 as a wired access point?
Yes. Connect an Ethernet cable from your router to the extender's LAN port, then configure it via the web interface as an access point mode.
How far can the ME10 extend my Wi-Fi signal?
The coverage depends on your environment, but typically it can extend up to 100 meters indoors. Obstacles like walls can reduce range.
Does the ME10 support 5 GHz Wi-Fi?
No, the ME10 only works on the 2.4 GHz band and supports speeds up to 300 Mbps. It is not compatible with 5 GHz networks.
How do I reset the Mercusys ME10 to factory defaults?
With the device powered on, use a paperclip or thin pin to press and hold the Reset hole for about 5 seconds until the LEDs flash. Release and wait for reboot.
What does the signal strength LED indicate?
The LED shows the connection quality between the extender and your router: Solid green = good, Yellow = fair, Red = poor. If red, move the extender closer to the router.
Can I connect multiple devices to the ME10?
Yes. The ME10 can support up to 15 devices simultaneously, though performance may decrease with more connections.
Is the ME10 compatible with any internet provider?
Yes, the ME10 works with any standard router or gateway from any ISP. It simply extends your existing Wi-Fi signal.
How do I update the firmware on the ME10?
Log in to the web interface at http://mwlogin.net, go to System Tools > Firmware Upgrade, and follow the prompts. Download the latest firmware from the Mercusys support website.
User questions about ME10 MERCUSYS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Wi-Fi repeater in PDF format for free! Find your manual ME10 - MERCUSYS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ME10 by MERCUSYS.
USER MANUAL ME10 MERCUSYS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MERCUSYS
Model : ME10
Category : Wi-Fi repeater