Venture VB-112 - Speaker AMPEG - Free user manual and instructions
Find the device manual for free Venture VB-112 AMPEG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bass Speaker Cabinet |
| Model | Venture VB-112 |
| Brand | Ampeg |
| Speaker Configuration | 1x12 inches |
| Power Handling (RMS) | 200 watts |
| Impedance | 8 ohms |
| Frequency Response | 55 Hz - 5 kHz |
| Sensitivity | 96 dB SPL (1W/1m) |
| Dimensions (H x W x D) | 18.5 x 17.75 x 15.5 inches |
| Weight | 35 lbs |
| Enclosure Type | Ported bass reflex |
| Input Connectors | 1/4" and Speakon |
| Grille Material | Steel mesh |
| Cabinet Material | Plywood with black Tolex covering |
| Handles | Side-mounted recessed handle |
| Compatible with | Ampeg Venture Series heads, standard bass amps |
| Cleaning Instructions | Wipe with dry cloth; avoid solvents |
| Safety Features | Rubber feet for stability |
| Warranty | 2 years limited |
Frequently Asked Questions - Venture VB-112 AMPEG
What is the power handling of the Ampeg Venture VB-112?
The VB-112 handles up to 200 watts RMS at 8 ohms, making it suitable for most bass rigs.
Can I use the VB-112 with a guitar amp?
Yes, but it is optimized for bass frequencies. Using it with a guitar amp may result in a different tonal response, especially in the low end.
What impedance is the VB-112?
The cabinet has an impedance of 8 ohms, which matches most standard bass amplifier outputs.
Does the VB-112 have a tweeter?
No, the VB-112 is a full-range bass speaker without a separate tweeter. It relies on the 12-inch driver for both low and high frequencies.
What type of input connectors does the VB-112 have?
It features both a 1/4-inch jack and a Speakon connector for secure connection to your amplifier.
How heavy is the VB-112?
The cabinet weighs approximately 35 lbs (15.9 kg), making it relatively portable for a 1x12 bass cab.
What are the dimensions of the VB-112?
Dimensions are 18.5 x 17.75 x 15.5 inches (47 x 45 x 39 cm).
Is the VB-112 compatible with the Ampeg Venture V3 head?
Yes, the VB-112 is part of the Venture series and matches perfectly with the V3 head, both in power handling and impedance.
How should I clean the VB-112 cabinet?
Use a dry or slightly damp cloth to wipe the exterior. Avoid harsh chemicals or abrasive materials.
Can I stack multiple VB-112 cabinets?
Yes, you can stack two VB-112 cabinets to create a 4x12 setup. Ensure total impedance matches your amp's minimum load (e.g., 4 ohms for two 8 ohm cabs in parallel).
User questions about Venture VB-112 AMPEG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual Venture VB-112 - AMPEG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Venture VB-112 by AMPEG.
USER MANUAL Venture VB-112 AMPEG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AMPEG
Model : Venture VB-112
Category : Speaker