WDI4600 - Barcode Reader Wasp - Free user manual and instructions
Find the device manual for free WDI4600 Wasp in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld Barcode Scanner |
| Model | WDI4600 |
| Brand | Wasp |
| Scan Technology | Laser / 2D Imager |
| Supported Barcodes | 1D (UPC, EAN, Code 39, Code 128, etc.), 2D (QR, Data Matrix, PDF417) |
| Interface | USB, RS-232, Keyboard Wedge |
| Power Source | 5V DC via USB (cable included) |
| Dimensions (L x W x H) | 165 x 65 x 90 mm |
| Weight | Approx. 150 g |
| Scan Range | Up to 30 cm for 1D, up to 20 cm for 2D |
| Scan Speed | Up to 200 scans per second |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Drop Resistance | 1.5 m onto concrete |
| Main Features | Plug-and-play, configurable beep, LED indicator, ergonomic design |
| Cleaning | Wipe with dry or slightly damp cloth; do not use solvents |
| Safety | Laser class 2, <1 mW output; avoid direct eye exposure |
| Spare Parts / Repairability | Replacement cable and scanner housing available; consult service manual |
| Included Accessories | USB cable, quick start guide, cleaning cloth |
| Compatible Systems | Windows, macOS, Linux, Android, iOS (with OTG) |
Frequently Asked Questions - WDI4600 Wasp
How do I connect the Wasp WDI4600 to my computer?
Connect the scanner to a USB port using the included cable. The scanner should be automatically recognized as a HID keyboard. No additional drivers are required for basic use.
What barcodes can the WDI4600 read?
It reads common 1D barcodes (UPC, EAN, Code 39, Code 128) and 2D barcodes (QR, Data Matrix, PDF417).
The scanner is not beeping or scanning. What should I do?
Ensure the scanner is properly connected and the cable is not damaged. Check if the power LED illuminates. Try scanning a test barcode from the manual. If the issue persists, reset the scanner by unplugging it for 10 seconds.
How do I clean the scanner lens?
Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol. Gently wipe the lens. Do not use abrasive cleaners or immerse the scanner in liquid.
Can I use the scanner with a smartphone?
Yes, if your smartphone supports USB OTG, you can connect the scanner via a USB OTG adapter. The scanner will work with most apps that accept keyboard input.
What is the laser safety class of the WDI4600?
The scanner uses a Class 2 laser with less than 1 mW output. It is safe for normal use but avoid staring directly into the laser beam.
How to configure the scanner for different interfaces (USB, RS-232)?
Scan specific configuration barcodes from the user manual to switch between interface modes. For RS-232, you may need an optional cable.
The scanner adds extra characters or prefixes. How to remove them?
This is usually due to suffix settings. Scan the 'Reset to defaults' barcode in the manual to clear any custom formatting. Alternatively, configure via barcode programming.
What is the maximum read distance?
For standard 1D barcodes, up to 30 cm. For 2D barcodes, typically up to 20 cm. Distance may vary based on barcode size and quality.
Where can I find replacement parts or the service manual?
Replacement cables and scanner housings are available from Wasp or authorized dealers. The service manual can be downloaded from the Wasp support website.
User questions about WDI4600 Wasp
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual WDI4600 - Wasp and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WDI4600 by Wasp.
USER MANUAL WDI4600 Wasp
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Wasp
Model : WDI4600
Category : Barcode Reader