SRP-330II - Printer Bixolon - Free user manual and instructions
Find the device manual for free SRP-330II Bixolon in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Thermal Receipt Printer |
| Brand | Bixolon |
| Model | SRP-330II |
| Dimensions (W x D x H) | 145 x 195 x 140 mm |
| Weight | 1.5 kg |
| Power Supply | 24 V DC, 2.5 A |
| Print Technology | Direct Thermal |
| Print Speed | Up to 250 mm/s |
| Print Resolution | 203 dpi (8 dots/mm) |
| Paper Width | 58 mm or 80 mm |
| Paper Roll Diameter | Up to 83 mm |
| Interface | USB, Serial (RS-232), Ethernet |
| Autocutter | Yes (full or partial cut) |
| Cash Drawer Port | Yes (RJ11) |
| Emulation | ESC/POS, Star Line Mode |
| Operating Temperature | 5°C to 45°C |
| Humidity | 10% to 80% non-condensing |
| Maintenance | Clean print head with alcohol swab; avoid dust buildup |
| Safety | Overheat protection; use only supplied power adapter |
| Spare Parts | Print head, platen roller, cutter blade, power adapter |
| Repairability | Modular design; replaceable parts by qualified personnel |
Frequently Asked Questions - SRP-330II Bixolon
How do I load paper into the SRP-330II?
Open the cover, insert the paper roll with the thermal side facing up. Pull out a short length of paper, then close the cover firmly until it clicks.
What type of paper does the SRP-330II use?
It uses standard thermal receipt paper rolls of 58 mm or 80 mm width, with a maximum outer diameter of 83 mm.
How do I connect the printer to my computer?
Connect via USB, RS-232 serial cable, or Ethernet. Install the appropriate driver from the Bixolon website. For USB, use a standard USB-A to USB-B cable.
Why is the printer not printing?
Check that the paper is loaded correctly, the cover is closed, and the power is on. Also verify the cable connection and that the correct driver is installed in your software.
How do I clean the print head?
Use a cotton swab moistened with isopropyl alcohol to gently wipe the print head. Allow it to dry completely before using the printer. Clean after every 2-3 rolls of paper.
Does the SRP-330II support graphics and barcodes?
Yes, it supports bit image graphics, barcodes (EAN, UPC, Code 128, etc.), and logos via ESC/POS commands.
What should I do if the paper jams?
Turn off the printer, open the cover, and gently remove the jammed paper. Check for any debris in the paper path. Reload paper and close the cover securely.
Can I use the printer with a cash drawer?
Yes, the SRP-330II has an RJ11 port for connecting a cash drawer. Use a standard cash drawer cable and send the appropriate ESC/POS command (usually p).
How do I change the paper width?
The printer supports two paper widths (58 mm and 80 mm). You must adjust the paper guide inside the printer. Refer to the manual for the exact positions of the guide adjustments.
Where can I find the latest drivers and manuals?
Visit the Bixolon support page at www.bixolon.com and search for SRP-330II. Drivers for Windows, Linux, and OPOS are available for download along with the user manual.
User questions about SRP-330II Bixolon
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Printer in PDF format for free! Find your manual SRP-330II - Bixolon and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SRP-330II by Bixolon.
USER MANUAL SRP-330II Bixolon
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Bixolon
Model : SRP-330II
Category : Printer