GA029GD202 - Grinder MAKITA - Free user manual and instructions
Find the device manual for free GA029GD202 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Angle Grinder |
| Model | GA029GD202 |
| Power Source | 18V Li-ion Battery (not included) |
| Disc Diameter | 125 mm (5") |
| No Load Speed | 8,500 RPM |
| Spindle Thread | M14 |
| Dimensions (L x W x H) | 355 x 140 x 165 mm |
| Weight (without battery) | 2.4 kg |
| Soft Start | Yes |
| Electronic Brake | Yes |
| Variable Speed | No |
| Protection Features | Overload protection, restart protection, anti-restart function |
| Side Handle | Vibration-absorbing, adjustable |
| Wheel Guard | Tool-less adjustment, lock-off feature |
| Battery Compatibility | Makita 18V LXT series (BL1815, BL1820, etc.) |
| Charger | Not included, sold separately |
| Maintenance | Clean air vents regularly; check carbon brushes after 200 hours |
| Repairability | Spare parts available via Makita service centers |
| Included Accessories | Side handle, wheel guard, lock nut wrench, inner flange |
Frequently Asked Questions - GA029GD202 MAKITA
What type of battery does the GA029GD202 use?
The grinder uses 18V Li-ion batteries from the Makita LXT series, such as BL1815, BL1820, or BL1830.
Can I use 115 mm discs on this grinder?
No, the GA029GD202 is designed for 125 mm (5 inch) discs. Using smaller discs may cause safety issues.
Does this grinder have a soft start feature?
Yes, it includes soft start for smoother acceleration and reduced kickback.
How do I change the grinding wheel?
Press the spindle lock, use the supplied wrench to loosen the lock nut, replace the disc, and tighten the nut securely. Ensure the wheel guard is properly positioned.
What safety precautions should I take?
Always wear safety goggles and gloves. Ensure the wheel guard is in place. Disconnect the battery before changing accessories. Use the side handle for two-handed operation.
Is the GA029GD202 suitable for cutting metal?
Yes, with the appropriate cutting disc, it can cut metal. For best results, use a disc rated for metal and avoid forcing the tool.
How do I clean the grinder?
Use a dry cloth to wipe the exterior. Clean the air vents with compressed air to prevent dust buildup. Do not use water or solvents.
What does the electronic brake do?
The electronic brake stops the disc within seconds after releasing the trigger, enhancing safety and efficiency.
Can I use a wire brush on this grinder?
Yes, but you must use a 125 mm wire cup brush compatible with the spindle speed. Ensure the brush is rated for at least 8,500 RPM.
Where can I find spare parts or service?
Contact an authorized Makita service center. Spare parts like carbon brushes, switches, and gears are available. Check the manual for part numbers.
User questions about GA029GD202 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Grinder in PDF format for free! Find your manual GA029GD202 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GA029GD202 by MAKITA.
USER MANUAL GA029GD202 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : GA029GD202
Category : Grinder