ERTC-101 - Uncategorized ENTES - Free user manual and instructions
Find the device manual for free ERTC-101 ENTES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Time Relay / Control Relay |
| Brand | ENTES |
| Model | ERTC-101 |
| Dimensions (H x W x D) | 90 mm x 36 mm x 58 mm |
| Weight | Approx. 150 g |
| Power Supply | 24-240 V AC/DC (50/60 Hz) |
| Power Consumption | < 2 VA |
| Output Contacts | 2 changeover (CO) relays, 8 A / 250 V AC |
| Time Ranges | 0.1 s - 10 days (selectable) |
| Functions | On-delay, Off-delay, Interval, Flasher, Star-delta, etc. |
| Adjustment | Rotary switches and potentiometers |
| Display | LED indicators for power and relay status |
| Mounting | DIN rail (EN 60715) |
| Protection Rating | IP20 (front panel) |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +70°C |
| Humidity | < 95% RH (non-condensing) |
| Cleaning | Use a dry, soft cloth. Do not use solvents. |
| Safety Standards | IEC/EN 60947-5-1, IEC/EN 61812-1 |
| Spare Parts Availability | Contact ENTES support or authorized distributors |
| Warranty | 2 years |
Frequently Asked Questions - ERTC-101 ENTES
How do I set the time range on the ERTC-101?
Use the time range selector (rotary switch) to choose the desired range (e.g., 0.1-1s, 1-10s, etc.). Then adjust the potentiometer within that range.
What is the power supply voltage for the ERTC-101?
The device accepts 24-240 V AC/DC (50/60 Hz). Ensure the supply voltage is within this range.
Can the ERTC-101 be used for star-delta motor starting?
Yes, one of its selectable functions is star-delta. Set the function switch accordingly and adjust the time delay for the transition.
How do I wire the output contacts?
The ERTC-101 has two changeover relays (COM, NC, NO). Connect your load between common and normally open or normally closed as needed. Maximum load: 8 A / 250 V AC.
What does the LED indicator mean?
The green LED indicates power is applied. The yellow LED indicates the output relay is energized.
How do I mount the ERTC-101?
Snap the device onto a DIN rail (35 mm, EN 60715). Ensure it clicks firmly into place.
What should I do if the device does not power on?
Check the supply voltage at terminals A1 and A2. Verify wiring and fuses. If still off, the device may be defective.
Is the ERTC-101 suitable for outdoor use?
It has IP20 protection, so it is only suitable for indoor or enclosed environments. Protect from moisture and dust.
How do I clean the device?
Use a dry, soft cloth. Do not use water, solvents, or abrasive cleaners.
Where can I find the user manual for the ERTC-101?
You can download the free PDF manual from notice-facile.com or the ENTES website.
User questions about ERTC-101 ENTES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual ERTC-101 - ENTES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ERTC-101 by ENTES.
USER MANUAL ERTC-101 ENTES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENTES
Model : ERTC-101
Category : Uncategorized