DATALOGIC

Gryphon GD4132 - Barcode Reader DATALOGIC - Free user manual and instructions

Find the device manual for free Gryphon GD4132 DATALOGIC in PDF.

📄 428 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice DATALOGIC Gryphon GD4132 - page 11
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeBarcode Reader
BrandDatalogic
ModelGryphon GD4132
Scanning Technology2D Imager (CMOS)
Readable Codes1D, 2D (QR, Data Matrix), PDF417, Postal
InterfacesUSB, RS-232, Keyboard Wedge
Scan RangeUp to 30 cm (for typical 1D codes)
Scan SpeedUp to 270 scans/sec
Dimensions (W x D x H)69 x 104 x 165 mm
Weight195 g (without cable)
Cable Length2 m (standard)
Power Supply5 VDC via USB or external power supply (optional)
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 60°C
Humidity5% to 95% (non-condensing)
Drop Specification1.5 m drops onto concrete
Protection ClassIP42
LED IndicatorsGreen/Red for good/bad read
BeeperProgrammable tone (mute option)
MaintenanceClean exterior with soft, dry cloth
SafetyClass 1 LED product, eye-safe
Spare PartsContact Datalogic authorized resellers
RepairabilityNo user-serviceable parts; consult support
General InformationHandheld, ergonomic design; suitable for retail and light industrial use

Frequently Asked Questions - Gryphon GD4132 DATALOGIC

How do I set up the Gryphon GD4132 for the first time?
Connect the scanner to your computer via USB. The scanner will beep and power on. Install the appropriate driver if needed (most systems recognize it as HID keyboard). You can start scanning barcodes immediately.
What barcode types does the GD4132 support?
It supports 1D (UPC, EAN, Code 128, Code 39, etc.) and 2D (QR, Data Matrix, PDF417, Aztec) barcodes, as well as postal codes like USPS and Royal Mail.
Can I use the scanner with a mobile device?
Yes, if you have a USB OTG adapter for Android or iOS compatible camera connection kit. The scanner appears as a keyboard. Note that power draw might exceed mobile port limits; use a powered hub if needed.
How do I reset the scanner to factory defaults?
Scan the 'Restore Factory Defaults' barcode from the user manual. This resets all settings including interface, beeper volume, and symbology options.
What does the LED light mean?
Green solid indicates ready to scan. Green flash with beep means successful read. Red flash with error beep indicates a failed read or configuration error. Rapid flashing may indicate low power.
How do I clean the scanner?
Disconnect the scanner. Wipe the exterior with a soft, lint-free cloth slightly damped with water or mild cleaning solution. Avoid harsh chemicals. Do not spray directly on the device.
The scanner is not reading barcodes properly. What should I check?
Ensure the barcode is not damaged or dirty. Verify the scanner is configured for the correct symbology. Check the cable connection and try reconnecting. Perform a factory reset if needed.
Can I change the beeper volume?
Yes, scan the appropriate barcode from the user manual to adjust volume to low, medium, high, or mute. Some models allow setting via Datalogic Aladdin software.
Is the GD4132 compatible with my POS system?
The scanner emulates a keyboard, so it works with any POS that accepts keyboard input. For serial or USB COM port emulation, you may need to install specific drivers from Datalogic.
What is the warranty period for this scanner?
Datalogic offers a standard 3-year warranty against defects in materials and workmanship. Extended warranties may be available through resellers. Retain proof of purchase.

User questions about Gryphon GD4132 DATALOGIC

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Barcode Reader in PDF format for free! Find your manual Gryphon GD4132 - DATALOGIC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Gryphon GD4132 by DATALOGIC.

USER MANUAL Gryphon GD4132 DATALOGIC

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : DATALOGIC

Model : Gryphon GD4132

Category : Barcode Reader