TW004GD203 - Screwdriver MAKITA - Free user manual and instructions
Find the device manual for free TW004GD203 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Screwdriver |
| Brand | Makita |
| Model | TW004GD203 |
| Voltage | 3.6 V |
| Battery Type | Lithium-ion (integrated) |
| Max Torque | 4.0 Nm |
| No Load Speed | 0 - 200 min⁻¹ |
| Chuck Type | Hexagonal 6.35 mm (1/4") |
| Dimensions (L x W x H) | 188 x 67 x 88 mm |
| Weight (with battery) | 0.54 kg |
| Charging Time | Approx. 1 hour |
| Drilling Capacity (Wood) | 6 mm |
| Drilling Capacity (Steel) | 4 mm |
| Screwing Capacity (Wood) | 5 mm |
| LED Light | Yes, with afterglow function |
| Variable Speed Trigger | Yes |
| Forward/Reverse Switch | Yes |
| Ergonomic Grip | Soft rubber handle |
| Safety Lock | Yes (anti-start mechanism) |
| Maintenance | Keep clean, store in dry place |
| Spare Parts Available | Through Makita service centers |
| Warranty | 1 year (check local regulations) |
Frequently Asked Questions - TW004GD203 MAKITA
How do I charge the Makita TW004GD203?
Connect the charger to the battery port on the handle. The LED indicator will show red while charging and turn green when fully charged. Charging typically takes about 1 hour.
Can I use the screwdriver while charging?
No, the tool cannot be operated while connected to the charger. You must disconnect it before use.
What is the maximum screw size?
For soft wood, up to 5 mm diameter screws. For harder materials, pre-drilling is recommended.
How do I change the bit?
Pull the chuck forward, insert the bit with a 6.35 mm hexagonal shank, then release the chuck to lock it in place.
Why is the LED light not working?
The LED light activates automatically when pressing the trigger. If it's dim or off, the battery may be low. Recharge the battery to restore full function.
How do I adjust the torque?
This model has a fixed torque setting (4.0 Nm) and does not feature adjustable torque. Use the variable speed trigger to control fastening.
What maintenance is required?
Keep the screwdriver clean and dry. Occasionally wipe the exterior with a damp cloth. Do not use solvents. Check the battery terminals for corrosion.
Is the battery replaceable?
Yes, the battery is integrated but replaceable. Contact a Makita service center for a replacement battery pack.
Can I use this screwdriver for drilling?
Yes, it can drill holes up to 6 mm in wood and 4 mm in steel. Use appropriate drill bits with a hexagonal shank.
What does the afterglow function mean on the LED?
The afterglow function keeps the LED on for a few seconds after releasing the trigger, providing illumination in dark areas.
User questions about TW004GD203 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Screwdriver in PDF format for free! Find your manual TW004GD203 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TW004GD203 by MAKITA.
USER MANUAL TW004GD203 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : TW004GD203
Category : Screwdriver