iDR0 - Uncategorized ALLEN & HEATH - Free user manual and instructions
Find the device manual for free iDR0 ALLEN & HEATH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Audio Processor / DSP |
| Brand | Allen & Heath |
| Model | iDR0 |
| Dimensions (W x H x D) | 482 x 44 x 200 mm (19" rack, 1U) |
| Weight | 2.0 kg |
| Power Supply | 12V DC, 1.5A (external adapter included) |
| Power Consumption | 18W max |
| Audio Inputs | 2 x balanced XLR, 2 x balanced TRS |
| Audio Outputs | 2 x balanced XLR, 2 x balanced TRS |
| Digital Audio Processing | 32-bit floating point, 96 kHz sample rate |
| Connectivity | Ethernet (TCP/IP control), USB (firmware update) |
| Control Interface | Remote control via software (Windows/Mac) |
| Supported Functions | Mixing, routing, EQ, dynamics, delay, matrix |
| Number of DSP Cores | 1 |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Relative Humidity | 0% to 90% non-condensing |
| Mounting | 19" rack-mountable, 1U |
| Cleaning Instructions | Use a dry, soft cloth. Avoid solvents and abrasives. |
| Safety Precautions | Do not expose to rain or moisture. Use only supplied power adapter. |
| Spare Parts Availability | Contact Allen & Heath authorized service centers |
| Repairability | Serviceable by qualified technician only |
Frequently Asked Questions - iDR0 ALLEN & HEATH
How do I connect the iDR0 to my network?
Connect an Ethernet cable from the iDR0's LAN port to your network switch or router. Ensure your computer is on the same subnet for control software discovery.
What software do I need to control the iDR0?
Use Allen & Heath iDR Control software, available for Windows and Mac. Download it from the Allen & Heath website.
Can I update the firmware?
Yes, firmware updates are performed via the USB port on the rear panel. Download the latest firmware from the official website and follow the instructions.
What is the default IP address?
The default IP address is 192.168.1.100. You can change it via the control software.
How do I reset to factory settings?
Press and hold the Reset button on the front panel for 10 seconds while powering on. All settings will be restored to defaults.
What type of power supply does the iDR0 require?
The iDR0 requires a 12V DC, 1.5A power supply with a center-positive 2.1mm barrel connector. Use only the included adapter.
How many audio channels can it process?
The iDR0 can process up to 8x8 channels of audio (8 inputs and 8 outputs) with full mixing and DSP capabilities.
Can I use the iDR0 with a wireless control?
Yes, if your computer or tablet is connected to the same network via Wi-Fi, you can run the control software wirelessly.
What is the latency of the iDR0?
The round-trip latency is typically 0.8 ms at 96 kHz sample rate, making it suitable for live sound reinforcement.
How do I clean the iDR0?
Disconnect the power, then wipe the enclosure with a dry, soft cloth. Do not use liquids or abrasive cleaners.
User questions about iDR0 ALLEN & HEATH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual iDR0 - ALLEN & HEATH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iDR0 by ALLEN & HEATH.
USER MANUAL iDR0 ALLEN & HEATH
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ALLEN & HEATH
Model : iDR0
Category : Uncategorized