DS-K1108AMK - Security System Hikvision - Free user manual and instructions
Find the device manual for free DS-K1108AMK Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control Reader |
| Brand | Hikvision |
| Model | DS-K1108AMK |
| Dimensions (W x H x D) | 86 mm x 86 mm x 24 mm |
| Weight | 0.15 kg |
| Operating Voltage | 12 VDC |
| Power Consumption | ≤ 2 W |
| Card Type Supported | MIFARE, EM, HID Prox (optional) |
| Read Range | Up to 5 cm |
| Communication Interface | Wiegand (26/34 bit), RS-485 |
| Operating Temperature | -10°C to +55°C |
| Protection Rating | IP65 (faceplate) |
| LED Indicators | Red / Green / Blue |
| Buzzer | Built-in |
| Tamper Switch | Yes |
| Compatible Controllers | Hikvision DS-K2600 series, third-party Wiegand controllers |
| Maintenance | Clean with dry cloth; avoid liquids; check wiring periodically |
| Spare Parts | Faceplate, cable gland, mounting bracket |
| Certifications | CE, FCC, RoHS |
| Warranty | 2 years |
Frequently Asked Questions - DS-K1108AMK Hikvision
How do I connect the DS-K1108AMK to a controller?
Connect the Wiegand D0 and D1 wires to the corresponding Wiegand input of your access controller. Also connect the power (12V) and ground. Refer to the wiring diagram in the manual for details.
What card types does this reader support?
The reader supports MIFARE (Classic, Plus) and EM cards. It also supports HID Prox with an optional module.
How do I change the LED color?
LED colors are controlled by the access controller via the Wiegand LED control wires. The reader can display red, green, blue, or combinations based on the input signals.
What is the read distance of the DS-K1108AMK?
The typical read range is up to 5 cm for MIFARE cards, depending on the card type and environment.
Can I use this reader outdoors?
Yes, the faceplate is rated IP65 for weather resistance, but the back housing should be protected from direct water exposure. It is suitable for indoor and sheltered outdoor use.
How do I reset the reader to factory settings?
The DS-K1108AMK does not have a user-accessible reset. To reset, you need to disconnect power, wait 10 seconds, and reconnect. For advanced reset, contact Hikvision support.
What is the operating temperature range?
The reader operates from -10°C to +55°C (14°F to 131°F). Avoid extreme conditions.
Does the reader include a tamper switch?
Yes, it has a built-in tamper switch that triggers an alarm when the reader is removed from the wall. Connect the tamper wires to your controller.
How do I clean the reader?
Clean the faceplate with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Ensure power is off during cleaning.
Can I use non-Hikvision controllers?
Yes, as long as the controller supports the standard Wiegand protocol (26 or 34 bit) and provides 12V power. The reader outputs standard Wiegand signals.
User questions about DS-K1108AMK Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security System in PDF format for free! Find your manual DS-K1108AMK - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-K1108AMK by Hikvision.
USER MANUAL DS-K1108AMK Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-K1108AMK
Category : Security System