DS4801 - Barcode Reader ZEBRA - Free user manual and instructions
Find the device manual for free DS4801 ZEBRA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Barcode Reader |
| Brand | Zebra |
| Model | DS4801 |
| Scan Technology | Laser / 2D Imager |
| Supported Symbologies | 1D and 2D barcodes, including QR, Data Matrix, PDF417 |
| Weight | Approximately 150 g |
| Dimensions (H x W x D) | 150 x 70 x 100 mm |
| Power Source | USB powered or optional battery pack |
| Interface | USB, RS-232, Keyboard Wedge |
| Scan Angle | Horizontal: 40°, Vertical: 30° |
| Reading Distance | Up to 30 cm for typical barcodes |
| IP Rating | IP52 |
| Drop Specification | 1.5 m drops to concrete |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% non-condensing |
| Cleaning | Wipe with a soft, damp cloth; avoid solvents |
| Safety Certifications | CE, FCC, IEC 60825 Laser Class 2 |
| Spare Parts Available | Replacement cables, power adapters, and battery packs |
| Repairability | Serviceable by authorized Zebra partners |
| General Information | Desktop or handheld use; includes user manual and software |
Frequently Asked Questions - DS4801 ZEBRA
How do I connect the Zebra DS4801 to my computer?
Connect the USB cable to an available USB port. The reader will automatically be recognized as a HID keyboard or serial device. You may need to install drivers from the Zebra website.
Can the DS4801 read barcodes from mobile phone screens?
Yes, the 2D imager version can read barcodes from electronic displays. Ensure the screen brightness is set to at least 50% and hold the reader at a slight angle.
What types of barcodes does the DS4801 support?
It supports most 1D (UPC, Code 128) and 2D (QR, Data Matrix, PDF417) symbologies. Refer to the manual for a full list.
How do I clean the scanner window?
Use a soft, lint-free cloth slightly dampened with water or mild soap solution. Avoid abrasive cleaners or solvents. Do not spray directly onto the window.
What is the maximum reading distance?
For standard 1D barcodes, the distance is up to 30 cm (12 inches). For high-density barcodes, distance may be shorter.
Does the DS4801 come with a stand?
The DS4801 typically includes a desk stand for hands-free operation. Check the package contents or order separately if needed.
What should I do if the scanner beeps but does not decode?
Ensure the barcode is clean and undamaged, and try increasing the distance or adjusting the angle. You may also need to recalibrate using the setup barcodes in the manual.
Can I use the DS4801 in wireless mode?
The standard DS4801 is corded. Wireless variants may be available under different model numbers. Verify your model's specifications.
How do I replace the cable on the DS4801?
Purchase a Zebra-approved replacement cable from an authorized dealer. Disconnect the old cable and plug in the new one; no tools required.
Is the DS4801 compatible with my POS system?
It is compatible with most POS systems using USB keyboard emulation or RS-232. You may need to configure settings using configuration barcodes.
User questions about DS4801 ZEBRA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Barcode Reader in PDF format for free! Find your manual DS4801 - ZEBRA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS4801 by ZEBRA.
USER MANUAL DS4801 ZEBRA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ZEBRA
Model : DS4801
Category : Barcode Reader