CL1704 - Vacuum Cleaner INTEX - Free user manual and instructions
Find the device manual for free CL1704 INTEX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Pool Vacuum |
| Model | CL1704 |
| Brand | Intex |
| Suitable For | Above-ground pools up to 18 ft diameter |
| Dimensions | 20 x 20 x 20 cm (approx.) |
| Weight | 2 kg (approx.) |
| Power Source | 12V DC (requires pool pump) |
| Filter Type | Fine mesh filter |
| Cleaning Area | Pool floor, walls, and waterline |
| Flow Rate | 400 GPH (typical) |
| Cable Length | 12 m (approx.) |
| Material | ABS plastic |
| Warranty | 1 year |
| Operating Temperature | 5-40°C |
| Maintenance | Clean filter after each use |
| Safety | Do not use without proper filtration; keep away from children |
| Spare Parts | Replacement filter cartridges (model R2100) |
| Included | Vacuum unit, 12m hose, filter cartridge |
Frequently Asked Questions - CL1704 INTEX
How do I install the Intex CL1704 vacuum?
Connect the vacuum to your pool's filtration system using the included hose. Ensure the pump is off before connecting. Place the vacuum in the pool and turn on the pump.
How often should I clean the filter?
Clean the fine mesh filter after each use by rinsing it with a garden hose. Replace the filter cartridge when it shows wear or clogging.
Why is my vacuum not moving?
Check that the pump is running and the hose is properly connected. Ensure there are no kinks in the hose and that the filter is not clogged. Also verify the pool water level is sufficient.
Can I use this vacuum with an Intex pool?
Yes, the CL1704 is designed for Intex above-ground pools up to 18 ft in diameter. It works with standard Intex pool pumps.
How do I store the vacuum?
After use, drain the hose and vacuum, dry them thoroughly, and store in a cool, dry place away from direct sunlight. Keep out of reach of children.
What spare parts are available?
Replacement filter cartridges (model R2100) and hoses are available. Check with Intex or authorized retailers.
Does the vacuum work on pool walls?
Yes, the CL1704 is designed to climb and clean pool walls and the waterline automatically.
Can I leave the vacuum in the pool?
It is not recommended to leave the vacuum in the pool when not in use, as prolonged exposure to chemicals can damage it. Remove and store properly.
What is the warranty period?
The Intex CL1704 comes with a 1-year limited warranty against manufacturing defects. Keep your receipt for service.
How do I troubleshoot if the vacuum stops?
First, check the pump power. Then inspect the hose for blockages or twists. Clean the filter. If the problem persists, consult the manual or contact Intex support.
User questions about CL1704 INTEX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual CL1704 - INTEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CL1704 by INTEX.
USER MANUAL CL1704 INTEX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : INTEX
Model : CL1704
Category : Vacuum Cleaner