Commercial CF2S-FGE - Fridge Hoshizaki - Free user manual and instructions
Find the device manual for free Commercial CF2S-FGE Hoshizaki in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Commercial Reach-In Refrigerator |
| Model | CF2S-FGE |
| Brand | Hoshizaki |
| Overall Dimensions (W x D x H) | 54 x 34 x 72 inches |
| Interior Capacity | Approximately 48 cubic feet |
| Weight | 420 lbs |
| Electrical Supply | 115 V / 60 Hz / 1 Ph |
| Amperage | 10 A |
| Refrigerant Type | R-290 Hydrocarbon |
| Temperature Range | 33°F to 45°F (0.5°C to 7°C) |
| Number of Doors | 2 |
| Door Style | Solid, Self-Closing with Stay-Open Feature |
| Interior Shelving | 4 Epoxy-Coated Wire Shelves per Section |
| Cooling System | Forced Air Circulation, Self-Contained |
| Control Type | Digital Temperature Display with Controller |
| Defrost Method | Automatic Electric Defrost |
| Condenser Location | Front-Access, Air-Cooled |
| Interior Material | Stainless Steel with Aluminum Back |
| Exterior Material | Stainless Steel Front, Galvanized Steel Sides |
| Legs/Casters | 4 Casters (2 with Brakes) and 4 Legs Included |
| NSF Certification | Yes |
| Energy Star Certified | Yes |
| Maintenance | Monthly Condenser Coil Cleaning Recommended |
| Warranty | 3-Year Parts and Labor |
Frequently Asked Questions - Commercial CF2S-FGE Hoshizaki
What is the recommended installation clearance for the Hoshizaki CF2S-FGE?
For proper ventilation, maintain at least 6 inches of clearance on the sides and back, and ensure the front air intake is unobstructed.
How do I set the temperature on the CF2S-FGE?
Press the SET button on the digital controller, use the arrow keys to adjust the temperature between 33°F and 45°F, and press SET again to confirm.
How often should I clean the condenser coils?
Clean the coils at least once a month using a soft brush or vacuum to remove dust and debris. This ensures efficient operation.
What should I do if the unit is not cooling properly?
Check that the condenser coils are clean, the door seals are intact, and the temperature setpoint is correct. If the issue persists, contact a certified technician.
Can I install the unit flush with the wall?
No, the unit requires 6 inches of clearance at the sides and back for proper airflow. Installing flush may cause overheating.
How do I level the refrigerator?
Adjust the legs or casters by turning them clockwise to lower or counterclockwise to raise. Use a level tool on the interior floor to ensure it is even.
What type of refrigerant does the CF2S-FGE use?
It uses R-290 hydrocarbon, an environmentally friendly refrigerant. Service must be performed by qualified personnel.
How do I replace a door gasket?
Remove the old gasket by pulling it out of the channel. Install the new gasket by pressing it firmly into the channel, starting at the top. Ensure it sits evenly. Replacement gaskets are available from Hoshizaki parts.
What is the defrost cycle frequency?
The unit performs automatic electric defrost cycles 4 times per day or when needed, depending on usage and humidity.
What does the alarm code 'Hi' mean?
A 'Hi' alarm indicates high temperature inside the cabinet. Check door closure, condenser cleanliness, and ensure the unit is not overloaded with warm products. Clear the alarm by pressing the Alarm Reset button.
User questions about Commercial CF2S-FGE Hoshizaki
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual Commercial CF2S-FGE - Hoshizaki and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Commercial CF2S-FGE by Hoshizaki.
USER MANUAL Commercial CF2S-FGE Hoshizaki
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoshizaki
Model : Commercial CF2S-FGE
Category : Fridge