REQ601X - Uncategorized HAGER - Free user manual and instructions
Find the device manual for free REQ601X HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Residual Current Circuit Breaker (RCCB) |
| Number of Poles | 2 |
| Rated Current | 40 A |
| Rated Voltage | 230 V AC |
| Sensitivity | 30 mA |
| Breaking Capacity | 6 kA |
| Mounting | DIN rail (35 mm) |
| Width | 2 modules (36 mm) |
| Dimensions (H x W x D) | 85 x 36 x 55 mm |
| Weight | ~0.15 kg |
| Power Supply | Mains 230 V AC |
| Main Functions | Earth leakage protection, automatic disconnection on residual current |
| Maintenance | Monthly test by pressing test button; clean with dry cloth |
| Safety | IP20, safety shut-off upon earth fault |
| Spare Parts | None; replace entire unit if faulty |
| General Information | Complies with IEC/EN 61008, CE marked |
Frequently Asked Questions - REQ601X HAGER
What is the Hager REQ601X?
The Hager REQ601X is a residual current circuit breaker (RCCB) designed to protect against earth faults. It automatically disconnects the circuit when a leakage current exceeds 30 mA.
How do I test the REQ601X?
Press the test button (marked "T") monthly. The device should trip immediately. If it does not, replace the RCCB.
What should I do if the REQ601X trips frequently?
Frequent tripping may indicate an earth leakage fault in your installation. Check appliances and wiring for insulation damage. If the problem persists, consult an electrician.
Can the REQ601X protect against overcurrent?
No, the REQ601X is an RCCB and provides only earth leakage protection. It does not detect overcurrent or short circuits. Use it in series with a circuit breaker.
How do I install the REQ601X?
Mount it on a 35 mm DIN rail in a distribution board. Connect the line (L) and neutral (N) conductors to the corresponding terminals. Ensure correct polarity.
What are the dimensions of the REQ601X?
The device is 85 mm high, 36 mm wide (2 modules), and 55 mm deep. It fits standard distribution boards.
Is the REQ601X suitable for industrial use?
It is designed for residential and commercial installations. For industrial applications with higher leakage currents, consider a different device.
Can I reset the REQ601X after a trip?
Yes, simply push the switch back to the ON position after the fault is cleared. However, investigate the cause before resetting.
What does the test button do?
The test button simulates an earth fault by creating a controlled leakage current. It verifies the mechanical and electrical operation of the RCCB.
Where can I find the manual for the REQ601X?
The manual is available for free download in PDF on notice-facile.com. You can also request a translated version by email.
User questions about REQ601X HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual REQ601X - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. REQ601X by HAGER.
USER MANUAL REQ601X HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : REQ601X
Category : Uncategorized