ARUB160LT2 - Water pump LG - Free user manual and instructions
Find the device manual for free ARUB160LT2 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Water Pump |
| Brand | LG |
| Model | ARUB160LT2 |
| Power Source | Electric (230V, 50Hz) |
| Power Consumption | 800 W |
| Max Flow Rate | 160 L/min |
| Max Head | 35 m |
| Inlet/Outlet Diameter | 1 inch (25.4 mm) |
| Material | Cast iron body, stainless steel impeller |
| Dimensions (W x D x H) | 300 x 200 x 250 mm |
| Weight | 12 kg |
| Protection Class | IPX4 |
| Noise Level | < 70 dB |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Regular cleaning of filter and impeller |
| Safety Features | Thermal overload protection, dry run protection |
| Spare Parts Availability | Impeller, seals, capacitors available |
| Warranty | 2 years |
Frequently Asked Questions - ARUB160LT2 LG
How to install the LG ARUB160LT2 water pump?
Ensure the pump is placed on a level surface. Connect the inlet pipe to the water source and outlet pipe to the desired point. Use thread seal tape on connections. Prime the pump before starting by filling the casing with water.
What is the maximum suction height?
The maximum suction height is approximately 8 meters under normal conditions. This may vary depending on the installation and water temperature.
How to prime the pump?
Remove the priming plug on top of the pump. Fill the casing completely with clean water until it overflows. Replace the plug tightly. The pump must be primed before each use to avoid dry running.
Why is the pump not starting?
Check the power supply and ensure the plug is connected. Verify that the thermal overload has not tripped. If the pump is still not starting, inspect the capacitor and motor windings for damage.
How to clean the water pump?
Disconnect the pump from power. Remove the inlet filter and clean it with water. Disassemble the volute to access the impeller and clean any debris. Reassemble and check for smooth rotation.
What type of fluid can be pumped?
This pump is designed for clean water without solid particles. It can also handle slightly dirty water with small impurities, but not aggressive liquids or sewage.
How to store the pump in winter?
Drain all water from the pump and pipes to prevent freezing damage. Store the pump in a dry, frost-free location. Remove and store the inlet filter separately.
What does the error code E1 mean?
Error E1 indicates overheating due to dry running or blocked impeller. Turn off the pump, let it cool down, and check for obstructions. Ensure the pump is primed before restarting.
Can the pump run dry?
No, the pump should never run dry. It has dry run protection that will shut it off automatically to prevent damage. Always ensure water supply before operation.
Where to find spare parts for ARUB160LT2?
Spare parts are available through authorized LG service centers and online retailers. Common parts include impeller, mechanical seal, capacitor, and O-rings.
User questions about ARUB160LT2 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water pump in PDF format for free! Find your manual ARUB160LT2 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ARUB160LT2 by LG.
USER MANUAL ARUB160LT2 LG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : LG
Model : ARUB160LT2
Category : Water pump