MDRC152FEE01 - Freezer MIDEA - Free user manual and instructions

Product Type	Chest Freezer
Brand	Midea
Model	MDRC152FEE01
Net Capacity	152 L
Energy Class	A+
Annual Consumption	220 kWh/year
Noise Level	41 dB
Freezing Temperature	Down to -18 °C
Autonomy in Case of Power Failure	15 h
Freezing Capacity	10 kg/24h
Dimensions (W x D x H)	810 x 560 x 850 mm
Net Weight	28 kg
Power Supply	220-240 V, 50 Hz
Current	0.5 A
Refrigerant Gas Type	R600a
Number of Baskets	1 basket
Fast Freeze Function	Yes
Adjustable Thermostat	Yes
Manual Defrost	Yes
Interior Material	Coated Steel
Climate Class	N-T
External Temperature Indicator	No
Repairability	Spare parts available on request
Maintenance and Cleaning	Unplug and clean with a damp cloth and mild soap
Safety	Child safety lock (optional)

Frequently Asked Questions - MDRC152FEE01 MIDEA

How to set the temperature on the Midea MDRC152FEE01 freezer?

Use the thermostat located inside or on the front. Turn the dial to a low position for a higher temperature and to a high position for more cold. The optimal temperature is -18 °C for food storage.

How long does it take for the freezer to reach the set temperature?

After plugging in, allow approximately 4 to 6 hours to reach -18 °C. Avoid opening the door during this period.

How to defrost the Midea MDRC152FEE01 freezer?

Unplug the appliance, remove food and place it in a cool place. Leave the door open to allow ice to melt. Use a plastic scraper if necessary. Never use sharp objects.

What to do if the freezer is noisy?

Check that it is level and that the feet are properly adjusted. Make sure it is not touching a wall or furniture. Slight humming is normal, but loud noise may indicate a compressor problem.

What is the freezing capacity in 24h?

The freezing capacity is approximately 10 kg per 24 hours. For fast freezing, activate the 'fast freeze' function 24 hours in advance.

The power indicator is on but the freezer is not cooling: what to do?

Check that the outlet works and the cord is intact. If the compressor does not start, wait 5 minutes after unplugging. Otherwise, contact technical support.

Can I install the freezer in an unheated garage?

Yes, the N-T climate class allows use from 16 °C to 43 °C. Below 10 °C, the internal temperature may not be stable.

How to clean the inside of the freezer?

Unplug the appliance, remove food and baskets. Wash with a soft cloth dampened with warm water and mild soap. Rinse and dry thoroughly before restarting.

Are spare parts available?

Yes, Midea offers spare parts through its network of authorized dealers. You can order thermostats, shelves, etc. Check the official website or contact customer service.

What is the power consumption of the MDRC152FEE01?

The annual consumption is estimated at 220 kWh, which corresponds to class A+. In daily use, this represents about 0.6 kWh per day.

USER MANUAL MDRC152FEE01 MIDEA

Chest Freezer

ELECTRONIC CONTROL SERIES

USER MANUAL

MDRC152FEE MDRC207FEE

MDRC280FEE MDRC345FEE

MDRC405FEE MDRC564FEE

LANGUAGES

EN English

DE Deutsch

IT Italian

FR French

ES Spanish

PT Portuguese

GR Greek

PL Polish

SR Serbian

HR Republic of Croatia

HU Hungary

SL Slovenia

RO Romania

BG Bulgaria

AL Albanian

CZ Czech

SK Slovak

LT Lithuania

LV Latvian

THANK YOU LETTER

Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

CONTENTS

THANK YOU LETTER 01

SPECIFICATIONS 02

PRODUCT OVERVIEW....03

PRODUCT INSTALLATION....04

OPERATION INSTRUCTIONS 06

CLEANING AND MAINTENANCE....11

TROUBLESHOOTING....12

APPENDIX....14

SPECIFICATIONS

Product model	MDRC152FEE	MDRC207FEE	MDRC280FEE
Rated Voltage / Frequency 220-240V~/50Hz
Freezer compartment Volume(L) 99 142 198
Freezing Capacity(kg/24h) 4.5 6.5 9
Temperature Rise Time(h) 17 15 21
Refrigerant,Amount(g) R600a,42 R600a,46 R600a,56
Overall Dimension (WxDxH)mm 545*495*850	632*550*850	816*550*850

Product model	MDRC345FEE	MDRC405FEE	MDRC564FEE
Rated Voltage / Frequency		220-240V~/50Hz
Freezer compartment Volume(L)	249	290	418
Freezing Capacity(kg/24h)	11.5	14 19
Temperature Rise Time(h)	28	45	50
Refrigerant,Amount(g)	R600a,66	R600a,62	R600a,100
Overall Dimension (WxDxH)mm	985*600*850	1115*670*850	1416*750*825

PRODUCT OVERVIEW

Names of components

1 Door handle (optional) 2 Lamp (optional) 3 Shelving basket (optional) 4 Power cord 5 Shutter 6 Temperature control panel

7 Drainage hole 8 Cabinet

ATTENTION

Images shown here are intended as examples only.

PRODUCT INSTALLATION

Installation Instructions

For refrigerating appliances with climate class

• Depending on the climate class, this refrigerating appliance is intended to be used at ambient temperatures within the range specified in the following table.
• The climate class can be found on the rating plate. The product may not operate properly at temperatures outside the specific range. • You can find the climate class on the product label.

Effective temperature range

- The product is designed to operate normally in the temperature range specified by its class rating.

Class Symbol		Ambient temperature range °C
		IEC 62552 (ISO 15502) ISO 8561
Extended temperate SN	+ 10 to + 32	+ 10 to + 32
Temperate N + 16 to + 32	+ 16 to + 32
Subtropical ST + 16 to + 38	+ 18 to + 38
Tropical T + 16 to + 43	+ 18 to + 43

Dimensions and Clearances

- Too small a distance from adjacent items may result in degradation of freezing capability and increased electricity costs. Allow over 100 mm of clearance from each adjacent wall when installing the appliance.

ATTENTION

The picture above is only for reference. The actual configuration will depend on the physical product or statement by the distributor.

Connecting the appliance

After installing the appliance, connect the power plug into a socket outlet.

1. Open the cover plate from the side with the tool.
2. Open the cover plate, take out the power cord, and then cover the cover plate.

ATTENTION

After connecting the power supply cord (or plug) to the outlet, wait 2 or 3 hours before you put food into the appliance. If you add food before the appliance has cooled completely, your food may spoil.

Changing the light (optional)

Any replacement or maintenance of the LED lamps is intended to be made by the manufacturer, its service agent or similar qualified person.

OPERATION INSTRUCTIONS

Control panel

EN

Operation key and lamp
1. High temperature warming indicator lamp A. Indicator lamp display area
2. Super-freeze indicator lamp B. Temperature display area
3. Centigrade temperature indicator lamp
4. Fahrenheit temperature indicator lamp
5. Super-freeze key
6. Tempering key

Display control

• When power on the freezer, the display window will be on for 3s, and then it will enter normal operation display, the original electrified display shall be under 18°C. Display of normal operation:
• If there is no failure, the set temperature or function mode will be displayed;
• If there is any failure, the failure code will be displayed;

Show sleep function:

• The sleep function will open by default after electrifying, after the temperature is confirmed, the display will extinguish after another 30s. The sleep mode could be switched via combined key:
• By pressing tempering key “ [8]” and super-freeze key “ [5] for 5s simultaneously, when “ ON ” is displayed in the temperature display area once, it indicates the sleep function is opened.
• By pressing tempering key "8" and super-freeze key "5" for 5s simultaneously, when "OF" is displayed in the temperature display area once, it indicates the sleep function is closed.

Operation control:

• Open the sleep function. After temperature confirmation for tempering every time, the display area will extinguish for another 30s;
• Close the sleep function. After temperature confirmation for tempering every time, the display area will not extinguish and keep on.

Lock/ Unlock

After the initial electrification, the key is in lock state by default; it is required to operate after unlocking.

• Lock: after pressing the super-freeze key "5" for continuously 3s, the display area will blink once, and the set temperature will take effect immediately, once entering lock state, the display area will not blink; after no-key operation for 30s, it could also enter automatic lock state, and the display area will blink once.
• Unlock: after pressing the super-freeze key "5" for continuously 3s, the display area will blink once to unlock. Under the lock state, it is required to conduct key operation after unlock.

IMPORTANT:

The various following key operations shall be implemented under unlock state

Fahrenheit and centigrade temperature conversion

- By long pressing the tempering key "8" for 3s, Fahrenheit and centigrade temperature conversion could be implemented. When the centigrade temperature is displayed, the centigrade temperature indicator lamp on; and when the Fahrenheit temperature is display, the Fahrenheit temperature indicator lamp in the display area will be on.

Temperature Setting

- By pressing the tempering key "8" the display window will display the refrigerator temperature, by pressing the tempering key "8" once every time, the refrigerator temperature will change 1 degree Celsius/Fahrenheit;

ATTENTION

For settings of -30°C/-22°F, an ambient temperature of 25°C/77°F or less is recommended.

The specific temperature change is cycled according to the figure below:

By pressing the super-freeze key “*”, the super-freeze indicator lamp “*” will turn on.

When setting the centigrade temperature, “-30” will be displayed in the temperature display area. If the compressor operates continuously, the centigrade temperature indicator lamp “°C” will turn on.

When setting the Fahrenheit temperature, “-22” will be displayed in the temperature display area. If the compressor operates continuously, the Fahrenheit temperature indicator lamp “°F” will turn on.

Quit super-freeze:

1. Power on after power failure.
2. Continuous operation of compressor for 24 hours.
3. If sensor failure occurs under super-freeze mode, you can quit super-freeze.
4. Under super-freeze mode, you can quit the super-freeze mode by repressing the super-freeze key “SUPER”.

High temperature alarm

- The indicator lamp “⚠️” will turn on for high temperature alarm.

Power failure memory

- During power failure, the sudden operating state of power failure will be locked. After power is recovered, the operation shall be continued according to the setting before the power failure. The super-freeze function will be quitted after power failure.

Failure code

If a failure occurs, the display area will show corresponding error codes as listed in the table below. The user should contact a specialist for maintenance to ensure the normal operation of the freezer.

Fault Code Fault Description

E2 Temperature sensor failure

Tips on storing food

• The low temperature of the freezer can keep food fresh for a long time and is mainly used for storing frozen foods and making ice.
• The freezer is suitable for storing meat, fish, shrimp, pastries, and other foods that will not be consumed in the short term. Do not store bottled or closed containers of fluids, such as bottled beer, beverages, etc.
• It is not suitable to store bottled or closed containers of fluid items for a long time. If you need to store such items, they should not be placed close to the wall of the freezer.
• There may be a slight deviation between the temperature inside the box and the actual set temperature, which does not affect normal use.
• Please note that food should be consumed within its shelf life.
• The fast-freezing function is designed to preserve the nutritional value of food. It can quickly freeze food in a short time. If a large amount of food needs to be frozen at once, it is recommended that users activate the fast-freezing function 5 hours in advance. This increases the freezing speed, allowing food to be frozen quickly and effectively retaining its nutrients.

ATTENTION

• After prolonged use, the hinge may experience some wear, which can cause noise when opening or closing the door and reduce the hinge's service life. It is recommended to apply grease to the hinge regularly for maintenance, which can effectively eliminate noise and extend the hinge's lifespan. • The weight of objects in the basket should not exceed 5 kg. - If the product is packaged in thin film, condensation may form on the surface of the box and the film when the temperature and humidity of the transportation environment change rapidly. This is a normal physical phenomenon and does not affect the use of the product.

CLEANING AND MAINTENANCE

Your freezer is designed for year-round use and requires minimal cleaning and maintenance. To keep your freezer running efficiently and odor-free, we recommend cleaning it regularly.

Defrost

Freezer shall be manually defrosted.

• Unplug the freezer and open the freezer door, remove foods and shelving basket before defrosting; Open the outflow hole and drainage hole (and place water container at the outflow hole); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth. When the frost softens, an ice scraper might be used to the accelerate de-icing process.
• Please remove the food and put in a cool place when defrosting before removing accessories.

Stop using

• Power failure: Foods can be preserved for a couple of hours even in summer in case of power failure; it is recommended to reduce the frequency of opening door and do not put fresh foods into the freezer.
• Long-time nonuse: Please unplug the freezer left unused for a long time for cleaning. Keep the door open to avoid the bad odor.
• Moving: Do not turn upside or vibrate the freezer, the carrying angle can not be greater than 45° . Do not hold the door and hinge when moving this unit.

ATTENTION

• Other mechanical devices or other means shall not be used to accelerate except those recommended by the manufacturer. Do not damage the refrigerant circuit.
• Continuous operation is recommended when the freezer is started. Please do not stop the freezer under normal circumstances so as not to affect the freezer's service life.

TROUBLESHOOTING

The following simple issues can be handled by the user. Please call the after-sale service department if the issues are not solved.

Problem Possible reason
Not work	·Whether the freezer is plugged and connected to power;
	·Low voltage
	·Whether temperature control knob is in the work area
	·Failure power or tripping circuit.
Odor	·Odorous foods should closely wrapped;
	·Check whether there is any rotten food
	·Whether the interior shall be cleaned.
Long-term operation of compressor	·It is normal that freezer operates for longer time in summer when the ambient temperature is higher;
	·Do not put too much food in the freezer at one time;
	·Do not put foods until they are cooled;
	·Frequent opening of freezer door;
	·Thick frost layer (defrost is needed).
Light not work	·Whether the freezer is connected to power, whether the light is damaged.
Door can not be properly closed	·The freezer door is stuck by food packages;
	·Too much food;
	·Unbalanced freezer.
Loud noises	·Whether the floor is flat, whether the placement of freezer is stable;
	·Whether the freezer accessories are properly placed.
Transient difficulty in door opening	·After refrigeration, there will be pressure difference between the inside and outside of the freezer to result in transient difficulty in door opening. This is a normal physical phenomenon.
Over heat on sidewall	·The freezer enclosure may emit heat during operation specially in summer, this is caused by the radiation of the condenser, and it is a normal phenomenon.
Surface Condensation	·Condensation: condensation phenomenon will be detected on the exterior surface and door seals of the freezer when the ambient humidity is high, this is a normal phenomenon,and the condensation can be wiped away with a dry towel.
Airflow sound Buzz Clatter	·Refrigerants circulating in the refrigerant lines will produce eruption of sound and grunts which is normal does not affectthe cooling effect.
	·Buzz will be generated by running compressor specially when starting up or shutting down.
	·The solenoid valve or electric switch valve will clatter which is a normal phenomenon and does not affect the operation.

EN

APPENDIX

Special for new European standard

The ordered parts in the following table can be acquired from the Service provider channel.

Ordered part Provided by		Minimum time required for Provision
Thermostats Professional maintenance personnel		At least 7 years after the last model is launched on the market
Temperature sensors	Professional maintenance personnel	At least 7 years after the last model is launched on the market
Printed circuit boards	Professional maintenance personnel	At least 7 years after the last model is launched on the market
Light sources Professional maintenance personnel		At least 7 years after the last model is launched on the market
Door handles Professional repairers and final users		At least 7 years after the last model is launched on the market
Door hinges Professional repairers and final users		At least 7 years after the last model is launched on the market
Trays Professional repairers and final users		At least 7 years after the last model is launched on the market
Baskets Professional repairers and final users		At least 7 years after the last model is launched on the market
Door gaskets Professional repairers and final users		At least 10 years after the last model is launched on the market

Dear customer,

1. If you want to return or replace the product, please contact the store where you bought it.

(Remember to bring the purchase invoice.)

1. If your product breaks down and needs repair, please contact the after-sales service provider.

ATTENTION

The model information in the product database, as well as the model identifier, can be obtained through a weblink scanned by a QR code, if any, on the energy efficiency label of the product.

For more information about the energy efficiency of the appliance, visit https://ec.europa.eu and search using the model name.

The model name can be found on the rating label of the appliance.

1 Door handle (optional) 2 Lamp (optional) 3 Shelf basket (optional) 4 Power cord 5 Ventilation grille 6 Temperature regulator

TROUBLESHOOTING 12

APPENDIX 14

TECHNICAL SPECIFICATIONS

PRODUCT INSTALLATION

PRODUCT OVERVIEW....03

PROBLEMS AND SOLUTIONS....12

APPENDIX....14

SPECIFICATIONS

PRODUCT INSTALLATION....04

OPERATING INSTRUCTIONS....06

CLEANING AND MAINTENANCE 11

TROUBLESHOOTING 12

APPENDIX....14

SPECIFICATIONS

1 Door handle (optional) 7 Drain opening 2 Lamp (optional) 8 Housing 3 Basket (optional) 4 Power cord 5 Lock 6 Temperature control display

CAUTION

1. Open the cover plate on the side using a tool.
2. Open the cover plate, remove the power cord, and then close the cover plate.

CAUTION

After connecting the power cord (or plug) to the socket, wait 2 or 3 hours before placing food in the appliance. If you add food before the appliance is completely cooled, food spoilage may occur.

Replacing the light bulbs (optional)

- Any replacement or maintenance of LED bulbs is intended for the manufacturer, its service agent, or a similarly qualified person.

INSTRUCTIONS FOR USE

Control panel

Kontrolni tasteri i sijalica
1. Lampica indikatora za visoku temperaturu	A. Oblast prikaza lampice indikatora
2. Lampica indikatora za brzo zamrzavanje B. Oblast za prikaz temperature
3. Lampica indikatora za temperaturu u stepenima Celzijusa
4. Lampica indikatora za temperaturu u stepenima Farenhajtima
5. Taster brzog zamrzavanja
6. Taster za podešavanje temperature

Command screen

• When the freezer is turned on, the screen window lights up for 3 seconds, and then enters standard operating mode. After connecting to power, the screen displays a temperature below 18 °C.
• Standard operating mode display:
• If there is no fault, the set temperature or operating mode is displayed;
• If there is any malfunction, the fault code is displayed;

Display of sleep function:

• The sleep function will be activated by default after powering on. When the temperature is confirmed, the screen will turn off after the next 30 seconds. The sleep mode can be toggled using the key combination:
• Simultaneously press the temperature setting key “TEMP” and the quick freeze key “SUPER” for 5 seconds. When “ON” is displayed once in the temperature display area, it means the sleep function is active.
• Simultaneously press the temperature setting key “TEMP” and the quick freeze key “SUPER” for 5 seconds. When “OFF” is displayed once in the temperature display area, it means the sleep function is closed.

Operation control:

• Open the sleep function. Each time you confirm the temperature during temperature setting, the display area turns off for an additional 30 seconds;
• Close the sleep function. Each time you confirm the temperature during temperature setting, the display area does not turn off but continues to operate.

Temperature setting range in degrees Fahrenheit:

Quick freeze function

Entering quick freeze mode:

When you press the quick freeze key “SUPER”, the quick freeze indicator light “*” turns on.

When setting the temperature in degrees Celsius, the temperature display area shows “-30”. If the compressor continues to run, the Celsius temperature indicator light “°C” will be on.

When setting the temperature in degrees Fahrenheit, the temperature display area shows “-22”. If the compressor continues to run, the Fahrenheit temperature indicator light “°F” will be on.

Exiting quick freeze mode:

1 Door handle (optional) 2 Light (optional) 3 Shelf basket (optional) 4 Power cord 5 Latch 6 Temperature control panel

7 Drain outlet 8 Cabinet

WARNING

1. Using a tool, open the cover plate on the side.
2. Open the cover plate, remove the power cord, and then close the cover plate.

WARNING

After connecting the power cord (or plug) to the outlet, wait 2 or 3 hours before placing food in the appliance. If you place food before the appliance is fully cooled, the food may spoil.

1 Door handles (optional) 2 Light (optional) 3 Shelf basket (optional) 4 Power cord 5 Flap 6 Temperature control panel

PRODUCT INSTALLATION....04

OPERATING INSTRUCTIONS 06

CLEANING AND MAINTENANCE....11

TROUBLESHOOTING....12

APPENDIX 14

RO

SPECIFICATIONS

PRODUCT INSTALLATION

MDRC152FEE MDRC207FEE MDRC280FEE

Rated voltage/frequency 220–240 V~ / 50 Hz

1. Using a tool, open the side cover.
2. Open the cover, pull out the power cord, then close the cover.

WARNING

PRODUCT OVERVIEW 03

PRODUCT INSTALLATION 04

OPERATING INSTRUCTIONS 06

CLEANING AND MAINTENANCE 11

TROUBLESHOOTING 12

APPENDIX 14

SPECIFICATIONS

make yourself at home