DTP CrossPoint 86 4K - Video switch Extron - Free user manual and instructions
Find the device manual for free DTP CrossPoint 86 4K Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Matrix Switcher |
| Brand | Extron |
| Model | DTP CrossPoint 86 4K |
| Video Inputs | 8 x DTP, 8 x HDMI (with appropriate adapters) |
| Video Outputs | 6 x DTP, 6 x HDMI (with appropriate adapters) |
| Supported Resolutions | Up to 4K (4096x2160) @ 60 Hz |
| Audio Support | Embedded audio, analog audio de-embedding |
| Control Options | Ethernet, RS-232, USB, front panel |
| Dimensions (H x W x D) | 3.5 x 17.4 x 15.8 inches (8.9 x 44.2 x 40.1 cm) |
| Weight | 12.5 lbs (5.7 kg) |
| Power Supply | Internal, 100-240 VAC, 50/60 Hz |
| Power Consumption | 100 watts (maximum) |
| Operating Temperature | 32 to 104 °F (0 to 40 °C) |
| Cooling | Fan, user-replaceable |
| Mounting | Rack-mountable (19-inch, 2U) |
| Cleaning Instructions | Use a dry, soft cloth. Do not use liquid or aerosol cleaners. |
| Safety | IEC 60950-1 compliant. Do not block ventilation slots. |
| Repairability | Contact Extron support for repair parts and service. |
| Warranty | 3 years (parts and labor) |
Frequently Asked Questions - DTP CrossPoint 86 4K Extron
How do I reset the DTP CrossPoint 86 4K to factory defaults?
Press and hold the Reset button on the rear panel for 5 seconds until the front panel LEDs flash. Release the button; the unit will reboot with factory settings.
What is the maximum resolution supported?
The switcher supports resolutions up to 4K (4096x2160) at 60 Hz with 4:4:4 color sampling.
Can I control the switcher via Ethernet?
Yes, connect the Ethernet port to your network. Use Extron's GlobalViewer or PCS software for configuration and control via TCP/IP.
How do I update the firmware?
Download the latest firmware from extron.com. Connect via Ethernet, launch the Product Configuration Software (PCS), and select 'Firmware Update'.
What type of cables are required for DTP connections?
Use shielded CATx cable (CAT5e or higher) with RJ-45 connectors for DTP input and output connections.
Does the switcher support audio embedding/de-embedding?
Yes, it supports analog audio de-embedding on outputs and can embed analog audio into the DTP or HDMI signal.
Can I use HDMI inputs directly?
The switcher has DTP inputs, but you can use Extron DTP HDMI adapters (e.g., DTP HD 4K) to connect HDMI sources.
How do I clean the device?
Disconnect power. Use a dry, soft cloth to wipe the exterior. Do not use any liquids or sprays.
What is the power supply requirement?
The unit has an internal power supply that accepts 100-240 VAC, 50/60 Hz. Use the included power cord.
Is the fan replaceable?
Yes, the cooling fan is user-replaceable. Contact Extron support for the correct part and instructions.
User questions about DTP CrossPoint 86 4K Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video switch in PDF format for free! Find your manual DTP CrossPoint 86 4K - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DTP CrossPoint 86 4K by Extron.
USER MANUAL DTP CrossPoint 86 4K Extron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : DTP CrossPoint 86 4K
Category : Video switch