Tracer 1210AN - Régulateur de charge EPEVER - Free user manual and instructions
Find the device manual for free Tracer 1210AN EPEVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | MPPT Solar Charge Controller |
| Model | Tracer 1210AN |
| Brand | EPEVER |
| Rated Charge Current | 10 A |
| Battery Voltage | 12 V DC (auto-detection) |
| Maximum PV Input Voltage | 100 V DC (at minimum operating temperature) |
| Maximum PV Input Power | 130 W (12 V battery) |
| MPPT Efficiency | > 98% |
| Self-Consumption | < 12 mA |
| Charging Algorithm | 3-stage (Bulk, Absorption, Float) |
| Battery Types Supported | Sealed, Gel, Flooded, Lithium (user programmable) |
| Protections | PV reverse polarity, battery reverse polarity, over-temperature, over-current, over-voltage, short circuit |
| Display | LCD with backlight, showing system status and parameters |
| Communication | RS-232 (optional MT-50 remote meter) |
| Dimensions (W x H x D) | 137 x 97 x 37 mm |
| Weight | 0.2 kg |
| Operating Temperature Range | -25°C to +55°C |
| Enclosure Rating | IP30 |
| Mounting | DIN rail or wall mount |
| Certifications | CE, RoHS |
| Maintenance | Clean with a dry cloth; ensure ventilation; check connections periodically |
| Safety Precautions | Install in a dry, ventilated area; disconnect PV and battery before servicing; use appropriate wire gauge |
| Spare Parts / Repairability | Contact EPEVER or authorized service center for replacement components; no user-serviceable parts inside |
Frequently Asked Questions - Tracer 1210AN EPEVER
What is the maximum solar panel input voltage for the Tracer 1210AN?
The maximum PV input voltage is 100 V DC at the minimum operating temperature. Ensure the open-circuit voltage of your solar panel does not exceed 100 V.
Can I use the Tracer 1210AN with a 24V battery?
No, the Tracer 1210AN is designed for 12 V battery systems only. It auto-detects 12 V nominal voltage. For 24 V, consider a different model.
What battery types are compatible?
The controller supports Sealed, Gel, Flooded, and Lithium batteries. You can choose the battery type via the programming interface or default settings.
How do I connect the Tracer 1210AN?
Connect in this order: first the battery (positive and negative), then the solar panel (positive and negative). The controller will auto-detect the system voltage. Never connect the solar panel before the battery.
What is the maximum PV power I can connect?
For a 12 V battery, the maximum PV power is 130 W. Exceeding this may damage the controller.
Does the Tracer 1210AN have a remote display?
Yes, it has an RS-232 port for connecting the optional MT-50 remote meter for remote monitoring and programming.
How do I clean and maintain the controller?
Use a dry cloth to clean the exterior. Ensure the ventilation holes are not blocked. Periodically check all wiring connections for tightness and corrosion.
What protections does the Tracer 1210AN have?
It includes protection against PV reverse polarity, battery reverse polarity, over-temperature, over-current, over-voltage, and short circuit.
Can I use the Tracer 1210AN indoors?
Yes, it is rated IP30, suitable for indoor installation in a dry, ventilated location away from direct sunlight and moisture.
How do I reset the controller to factory defaults?
Press and hold the ENTER button for 5 seconds while in the settings menu, or select 'Load Defaults' in the LCD menu. Confirm the reset.
User questions about Tracer 1210AN EPEVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Régulateur de charge in PDF format for free! Find your manual Tracer 1210AN - EPEVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tracer 1210AN by EPEVER.