DFI 46710 - Dishwasher TEKA - Free user manual and instructions
Find the device manual for free DFI 46710 TEKA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Brand | Teka |
| Model | DFI 46710 |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | 50 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Efficiency Class | A++ |
| Number of Place Settings | 14 |
| Noise Level | 44 dB(A) |
| Wash Programs | Eco 50°C, Intensive 70°C, Quick 30 min, Glass, Pre-wash |
| Delay Start | Up to 24 hours |
| Water Consumption | 9 L per cycle |
| Energy Consumption | 0.93 kWh per cycle |
| Drying System | Heat exchanger |
| Child Lock | Yes |
| Leak Protection | AquaStop |
| Filter Type | Stainless steel and microfilter |
| Spray Arms | 3 (upper, middle, lower) |
| Cutlery Basket | Third rack |
| Maintenance | Clean filters monthly, descale every 3 months |
| Spare Parts Available | Filters, spray arms, racks, drain pump |
| Repairability Index | 8.0 / 10 |
Frequently Asked Questions - DFI 46710 TEKA
How do I install the Teka DFI 46710 dishwasher?
The dishwasher must be installed by a qualified technician. Ensure the water supply and drain connections are properly made. The appliance should be leveled using the adjustable feet. Refer to the installation manual for detailed steps.
What does the error code E15 mean on my Teka dishwasher?
Error code E15 indicates a water leakage or an issue with the AquaStop system. Turn off the water supply and unplug the dishwasher. Check for leaks under the appliance. If the problem persists, contact a technician.
How do I clean the filters on the DFI 46710?
Remove the lower rack and unscrew the cylindrical filter. Rinse it under running water using a soft brush. Clean the flat filter as well. Reassemble in reverse order. Clean filters monthly for optimal performance.
Why is my dishwasher not drying dishes properly?
Ensure you are using a rinse aid and that the rinse aid dispenser is filled. Check that the final rinse temperature is correct. Also, verify that the heat exchanger drying system is functioning and that the vent is not blocked.
How do I reset the Teka DFI 46710?
To reset, press and hold the Start button for about 3 seconds until the lights go off. Alternatively, unplug the dishwasher for one minute and then plug it back in.
Can I use regular dish soap in my dishwasher?
No, only use dishwasher detergent specifically designed for automatic dishwashers. Regular dish soap will cause excessive foam and may damage your appliance.
How do I adjust the water hardness setting?
Enter the settings menu by pressing the Program and Start buttons simultaneously for 5 seconds. Use the buttons to navigate and set the water hardness level according to your local water supply. Refer to the manual for hardness values.
What is the maximum number of place settings for this model?
The Teka DFI 46710 has a capacity of 14 standard place settings, making it suitable for medium to large households.
How do I fix a dishwasher that is not starting?
Check if the door is fully closed and latched. Ensure the appliance is plugged in and the circuit breaker is not tripped. Verify that the water supply is turned on. Also, check if the delay start timer is set.
Where can I buy replacement parts for the DFI 46710?
Authorized Teka spare parts can be purchased from certified retailers or online platforms such as Amazon or eSpares. Always use genuine parts to ensure compatibility and safety.
User questions about DFI 46710 TEKA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DFI 46710 - TEKA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFI 46710 by TEKA.