FM 200 - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free FM 200 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Anemometer / Air Flow Meter |
| Brand | PCE Instruments |
| Model | FM 200 |
| Measurement Parameters | Air velocity, air temperature, air flow rate |
| Measuring Range (Air Velocity) | 0.2 to 30 m/s |
| Measuring Range (Temperature) | -20 to +50 °C |
| Accuracy (Air Velocity) | ±(2% of reading + 0.2 m/s) |
| Accuracy (Temperature) | ±0.5 °C |
| Resolution (Air Velocity) | 0.01 m/s |
| Display | Backlit LCD, 4-digit |
| Power Supply | 9V block battery (6LR61/6F22) |
| Battery Life | Approx. 50 hours continuous use |
| Auto Power Off | Yes, after 10 minutes inactivity |
| Dimensions | 180 x 80 x 40 mm |
| Weight | 400 g (including battery) |
| Probe Type | Hot wire or vane (integrated) |
| Cable Length (Probe) | 1.5 m |
| Operating Temperature | 0 to +40 °C |
| Storage Temperature | -20 to +60 °C |
| Humidity Range | 0 to 90% RH (non-condensing) |
| Interface | USB (optional data transfer) |
| Maintenance | Clean with soft dry cloth; avoid solvents |
| Safety Precautions | Do not expose to extreme temperatures or moisture |
| Spare Parts / Repairability | Contact PCE Instruments for service and parts |
Frequently Asked Questions - FM 200 PCE Instruments
How to turn on the PCE Instruments FM 200?
Press and hold the ON/OFF button for 2 seconds until the display lights up.
What does the FM 200 measure?
It measures air velocity (m/s, km/h, ft/min, knots), air temperature, and calculates air flow rate (volume per time).
How to change the battery in the FM 200?
Open the battery compartment on the back, replace the 9V block battery observing polarity, and close securely.
Why does the display show 'OL'?
'OL' indicates overload – the measured value exceeds the instrument's range. Reduce the airflow or select a higher range if available.
Can the FM 200 be used for liquids?
No, the FM 200 is designed for air and non-corrosive gases only. Using it on liquids will damage the sensor.
How to calibrate the FM 200?
The FM 200 does not require user calibration. If accuracy is in doubt, send it to PCE Instruments for factory recalibration.
What is the auto power off time?
The device auto-powers off after 10 minutes of inactivity to save battery. Press any button to wake it up.
How to clean the probe?
Gently wipe the probe with a soft, lint-free cloth. Do not use any liquids or abrasive cleaners.
Does the FM 200 have a backlight?
Yes, press the Backlight button (usually marked with a bulb icon) to toggle the display backlight on/off.
Where can I find the user manual?
The manual is available for free download on notice-facile.com or the PCE Instruments website in PDF format.
User questions about FM 200 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual FM 200 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FM 200 by PCE Instruments.
USER MANUAL FM 200 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : FM 200
Category : Measuring equipment