PHC 10 - Measuring equipment PCE Instruments - Free user manual and instructions
Find the device manual for free PHC 10 PCE Instruments in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Handheld measuring instrument |
| Dimensions | 150 x 70 x 30 mm (5.9 x 2.8 x 1.2 in) |
| Weight | 200 g (7.05 oz) |
| Power Supply | 9V battery (6F22/PP3) |
| Display | LCD with backlight |
| Measurement Functions | pH, conductivity, temperature (depending on model) |
| Measurement Range | pH: 0-14; Conductivity: 0-2000 µS/cm; Temperature: -5 to 60°C |
| Resolution | pH: 0.01; Conductivity: 1 µS/cm; Temperature: 0.1°C |
| Accuracy | pH: ±0.02; Conductivity: ±2% FS; Temperature: ±0.5°C |
| Auto Calibration | Yes, up to 3 points (pH buffers) |
| Data Hold | Yes |
| Auto Power Off | Yes, after 10 minutes of inactivity |
| IP Rating | IP54 (splash and dust resistant) |
| Maintenance | Clean with a soft damp cloth; do not use abrasive cleaners |
| Safety Instructions | Do not immerse in water; avoid extreme temperatures and humidity |
| Spare Parts | Battery, electrode probes (sold separately) |
| Reparability | Battery and electrodes user-replaceable; other repairs by qualified personnel |
| Operating Temperature | 0°C to +50°C |
| Storage Temperature | -10°C to +60°C |
| Warranty | 2 years (excluding accessories) |
Frequently Asked Questions - PHC 10 PCE Instruments
How do I calibrate the PHC 10?
To calibrate, switch on the device, immerse the probe in a standard buffer solution (e.g., pH 7.01), press and hold the CAL button until the display flashes, then release. Repeat for other buffers if needed.
How can I change the battery?
Turn off the device, slide the battery cover open on the back, remove the old battery, and insert a new 9V battery (6F22/PP3) with correct polarity. Close the cover securely.
What should I do if the display is blank?
Check if the battery is installed correctly and has sufficient charge. Replace if necessary. Also ensure the device is turned on by pressing the power button. If still blank, contact support.
How do I clean the probe?
Rinse the probe with distilled water after each use. For stubborn residues, gently wipe with a soft cloth moistened with mild detergent. Rinse thoroughly and store with protective cap.
What is the measurement range for pH?
The PHC 10 measures pH from 0 to 14 with a resolution of 0.01 and accuracy of ±0.02 pH.
Can I use the device for continuous monitoring?
The PHC 10 is designed for spot measurements. Continuous use may drain the battery quickly. Use the HOLD function to freeze readings.
How do I replace the electrode?
Unscrew the old electrode counterclockwise, then screw in a new compatible electrode (sold separately) until snug. Recalibrate after replacement.
What does the 'Err' message mean?
An 'Err' message indicates an out-of-range measurement or a faulty probe. Check the probe connection, clean it, and ensure the sample is within the specified range.
Is the device waterproof?
The PHC 10 has an IP54 rating, meaning it is splash-proof but not waterproof. Do not submerge in water.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by selecting your language and providing your email.
User questions about PHC 10 PCE Instruments
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual PHC 10 - PCE Instruments and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PHC 10 by PCE Instruments.
USER MANUAL PHC 10 PCE Instruments
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PCE Instruments
Model : PHC 10
Category : Measuring equipment