Tapo DL110 - Surveillance Camera TP-LINK - Free user manual and instructions

Product Type	Smart Video Doorbell Camera
Brand	TP-Link
Model	Tapo DL110
Resolution	2K QHD (2560 x 1440)
Field of View	180° diagonal
Night Vision	Up to 30 ft (9 m) with infrared LEDs
Two-Way Audio	Yes, with noise cancellation
Motion Detection	PIR sensor, customizable zones
Video Storage	Free 24-hour cloud storage, optional microSD up to 256 GB
Connectivity	Wi-Fi 2.4 GHz 802.11b/g/n
Power Source	Wired (existing doorbell wiring, 16-24 VAC) or 12 V DC adapter
Dimensions	5.2 x 2.2 x 1.2 in (132 x 56 x 30 mm)
Weight	4.8 oz (136 g)
Weather Resistance	IP65 rated
Operating Temperature	-4°F to 122°F (-20°C to 50°C)
Audio Features	Built-in speaker and microphone, auto-respond with pre-recorded messages
App Support	Tapo app (iOS/Android) for live view, alerts, and settings
Smart Integrations	Amazon Alexa, Google Assistant
Installation	Mounting bracket and screws included; requires wiring
Safety Compliance	FCC, CE, RoHS

Frequently Asked Questions - Tapo DL110 TP-LINK

What power source does the Tapo DL110 require?

The Tapo DL110 can be powered by existing doorbell wiring (16-24 VAC) or using a 12 V DC adapter. Make sure the wiring is compatible before installation.

Does the DL110 support continuous recording?

Yes, with a microSD card (up to 256 GB, sold separately) or a Tapo Care subscription for cloud storage, you can enable continuous recording.

How do I reset the Tapo DL110 to factory defaults?

Press and hold the reset button on the back of the device for about 5 seconds until the LED flashes red/green. The camera will restart and enter setup mode.

Can I use the DL110 without a subscription?

Yes, you get free 24-hour snapshot storage. For video history or advanced features like person detection, a Tapo Care plan is recommended.

What is the field of view?

It has a 180° diagonal field of view, allowing you to see visitors from head to toe and packages on the ground.

Is the Tapo DL110 weatherproof?

Yes, it has an IP65 rating, meaning it is dust-tight and protected against water jets. It can withstand rain and snow.

How do I connect the DL110 to Wi-Fi?

Download the Tapo app, create an account, and follow the in-app instructions. The camera must be connected to a 2.4 GHz Wi-Fi network (not 5 GHz).

Can I share access with family members?

Yes, via the Tapo app you can invite others by sending an email or sharing a QR code. They can view the live feed and receive alerts.

What should I do if the camera goes offline?

Check your Wi-Fi connection, restart the camera by disconnecting power for 10 seconds, and ensure the router is within range. Also verify the power supply is stable.

Does the DL110 have a chime?

The camera itself does not include a physical chime. You can use the Tapo app to receive ring notifications or connect to an Amazon Echo or Google Home as a chime.

USER MANUAL Tapo DL110 TP-LINK

User Guide Smart Wi-Fi Door Lock

Contents

About This Guide 1

Introduction 2

Check Door Lock Compatibility 5

Install Your Doorbell....6

Set Up Your Door Lock 7

Manage Your Door Lock 8

Create a PIN Code 9

Add a User & Register Their Fingerprint....13

Check Event Log 17

Share Your Device 18

Manage Device Settings 19

Remove Your Door Lock 33

Authentication 36

About This Guide

This guide provides a brief introduction to the Smart Wi-Fi Door Lock and the Tapo app, as well as regulatory information.

Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.

Conventions

In this guide, the following convention is used:

Convention Description
Blue	Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline	Hyperlinks are in blue and underlined. You can click to redirect to a website.
■Note: Ignoring this type of note might result in a malfunction or damage to the device.

More Info

• Specifications can be found on the product page at https://www.tapo.com. Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

Introduction

Replace your existing door lock with a smarter one and unlock with the Tapo app, by fingerprint, Bluetooth, keypad, Smart Assistant, or with included backup keys. With ANSI/BHMA Grade 2 certification, the door lock surpasses Grade 3 locks by providing superior durability and higher security standards, making it ideal for those seeking enhanced protection.

• 6 Ways to Securely Access – Unlock with the Tapo app, by fingerprint, Bluetooth, keypad, Smart Assistant, or with included backup keys.
• Rapid Fingerprint Recognition – Recognizes and unlocks in seconds and stores up to 100 fingerprints.
• 1-Year Battery Life – Operates for one year before requiring maintenance or recharging.
• USB-C Charging – Built-in USB-C port on the battery for easy, convenient recharging.
• Smart Home Integration – Works with Alexa, Google Home, and Samsung SmartThings.
• Peek-Proof Passcodes – Enter decoy digits before and after your passcode for added security.
• Manage Resident & Guest Access – Manage resident and guest access with one-time or scheduled codes.
• Auto Lockout & Real-Time Alerts – Automatic lockouts after failed attempts and real-time alerts for suspicious activity keep your home secure.
• Detailed Activity Log – Track every lock and unlock for ultimate security awareness.
• Built-in Doorbell – A built-in doorbell complements the door lock for a more secure entryway.
• Quick & Easy Installation – Tapo DL110 boasts a hassle-free setup with all mounting tools included.
• Built to Brave the Elements – IP65-rated (exterior assembly) for year-round protection against dust and extreme weather.

Appearance - Exterior Assembly

1 Fingerprint Scanner

Lock/unlock with your fingerprint.

2 Status LED

Indicates the status of your device.

3 Key Pad

Lock/unlock the door by entering your PIN code.

4 Unlocking/Locking Button

- When you enter your PIN code starting with scramble digits, press this button to confirm unlocking.

- Press this button independently to lock the door.

5 Backspace

Press to delete the digit you entered.

6 Lock Cylinder

Used to unlock via the provided keys.

7 Ring Button

Press to ring the built-in doorbell.

8 Type-C Port

Connect to a power outlet to provide a temporary power supply.

Status LED Indications

Blinking red and green	Ready for setup
Pulsing green Connecting to Wi-Fi
Blinking amber	Low battery
Blinking green	Lock updating
Solid red, then turn off after 3 seconds	Updating failed
Blinking red three times Door jammed

Appearance - Interior Assembly

1 Wi-Fi On/Off Button

Turn on Wi-Fi and connect your device to a Wi-Fi network for remote control.

Turn off Wi-Fi and only control your device locally via Bluetooth.

2 Thumb Latch

Rotate to lock/unlock the door.

3 Battery Compartment

Insert the provided battery to power your lock.

4 Reset

• Press and hold for 5 seconds to reset Wi-Fi settings.
• Press and hold for 10 seconds to reset to factory default settings.

Check Door Lock Compatibility

Place the measuring template on the door, aligning the door edge line with the door edge. Use the dimensions on the template to measure your door.

Use the measuring template to measure your door.

Compatible with Single Cylinder

Integrated Locks Not Compatible

Mortise Locks Not Compatible

Install Your Doorbell

Check the FAQ to install your new door lock: https://www.tp-link.com/hk/support/faq/4052/

[OUTSIDE] [INSIDE]

Set Up Your Door Lock

After installing the door lock, follow the steps below to set up the door lock.

Step 1. Download Tapo App

Get the Tapo app from the App Store or Google Play, or by scanning the QR code below.

Step 2. Log In

Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.

Step 3. Add Your Device

Tap the button in the app and search for your model. Follow the app instructions to set up your door lock.

Manage Your Door Lock

After setup, your device will be listed on the Home page. You can tap your device to manage it.

1. Home Page

You can check your battery, favorite/unfavorite, and remove your device on the Home page.

2. Status Page

Lock/unlock your door, set a PIN code, add a user & register their fingerprint, check event log, check/set Smart Actions, and share your device.

Create a PIN Code

- One-Time Code

A one-time code is only effective once. You can set a one-time code for house cleaning or pet feeding.

1. Tap PIN Code on the Status page, then the + icon, and then select One-Time Code.

1. Set a code and its effective time, then name your code. A one-time code is created successfully.

Create a PIN Code

- Normal Code

A normal code can be used repeatedly within your set effective time.

1. Tap PIN Code on the Status page, then the + icon, and then select Normal Code.

1. Set a code and its effective time, then name your code. A normal code is created successfully.

Add a User & Register Their Fingerprint

1. Tap Member & Fingerprints on the Status page, then Add User. Give this user a name for easier identification and set its avatar.

1. This user is added successfully. You can add his/her fingerprint so that he/she can unlock via the registered fingerprint. Tap Add Fingerprint and follow instructions to register the fingerprint of the added user. Then name the registered fingerprint.

1. If you want this user to manage your door lock, you can share your door lock with this user and set his/her access permissions.

Tap TP-Link ID. Binding the user's TP-Link ID to share the lock with him/her. Then assign Advanced or Basic access permissions to this user.

1. Enter the user's TP-Link ID and wait for him/her to accept the invitation.

Check Event Log

Tap Event Log on the Status page. If you want to save the log to the Cloud, you can enable Log Backup. You can tap the icon on the upper right corner to check the event log in its timeline.

Share Your Device

Share your door lock with family members to let them manage your door lock. You can set their access permissions.

Tap Device Sharing. You can select added users whose TP-Link ID has not been bound or add a new user. Then refer to step 3-4 of "Add a User & Register Their Fingerprint" to bind the user's TP-Link ID to share the lock with him/her and assign Advanced or Basic access permissions to this user.

Manage Device Settings

Tap ☐ on the Status page to enter the Device Settings page.

1. Set Doorbell Settings

Enable the built-in doorbell of your lock and set its volume. You can also pair chimes with the door lock so the chimes will ring when the doorbell is pressed.

2. Set an Emergency Code

Set an emergency code to unlock during emergent cases. The emergency code is only effective once within the valid time. You can generate up to 16 emergency codes every 4 hours. You can share the code as you need.

3. Set Lock Settings

Set how to lock your door. If One-Touch Locking is selected, you can enable Auto Lock in case you forget to lock the door. You can also set a Disable Auto Lock schedule to disable auto lock within set time. If you select Verified Locking, it's recommended that you disable Auto Lock to prevent unintended locking of the door.

4. Security Settings - Door Jam Alarm

Your device will sound an alarm when the door is jammed.

4. Security Settings - Wrong-Try Protection

When the number of failed fingerprint attempts reaches the limit you set, you can use the PIN code to unlock. If the limit of PIN code attempts is reached, both methods will be locked for the time you set.

4. Security Settings - Scramble PIN Code

Enter decoy digits before and after your passcode for added security.

4. Security Settings - App Lock/Unlock

Set whether to allow locking/unlocking via the Tapo app.

4. Security Settings - Touch ID Verification

Verify yourself with Touch ID before you can control the lock. Touch ID adds a layer of security to your door lock.

5. Voice Prompts

Enable to activate voice prompts for your operation.

6. Calibrate Your Lock

Calibrate your lock for optimal performance.

7. Network Connection

Check your lock's Wi-Fi connection status. With Wi-Fi connected, you can control your door lock remotely.

Tap Set Up Wi-Fi Network and follow instructions to connect your lock to a Wi-Fi network. When Wi-Fi is connected, you can check the network name, signal, or switch to another Wi-Fi.

8. Back Up Event Log

Enable Log Backup to save the log to the Cloud. If you don't want to save the log to the Cloud, you can disable this feature and choose whether to clear historical log saved on the Cloud.

9. Notifications

Choose whether to receive locking/unlocking notifications.

10. Voice Control

Works with Alexa and Google Home for convenient voice control.

For Amazon Alexa integration, please check: https://www.tp-link.com/support/faq/4068/.

For Google Home integration, please check: https://www.tp-link.com/support/faq/4069/.

Remove Your Door Lock

There are 3 ways to remove your door lock.

Method 1. Remove Device on the Home Page

Long press your device on the Home page and tap

Method 2. Remove Device on the Settings Page Tap Remove Lock on the Settings page.

Method 3. Press the Reset Button on the Device

Remove the battery cover and press and hold for 10 seconds to reset to factory default settings.

Pressing and holding for 5 seconds will reset Wi-Fi and keep other settings.

Authentication

FCC compliance information statement

Product Name: Tapo Smart Wi-Fi Door Lock

Model Number: Tapo DL110

Responsible Party:

TP-Link Systems Inc.

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: [phone]

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.

To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

We, TP-Link Systems Inc., have determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024-09-11

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

Safety Information

• Never touch the product with wet hands.
• Do not disassemble, repair or modify the product.
• Do not use the device where wireless devices are not allowed.
• Do not use the product if the casing has been broken. Danger of electric shock.
• Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.
• Do not place near automatically controlled devices such as fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters the product, turn off the circuit breaker and contact an authorized electrician.
• This product is not intended to be used when providing medical care. Consult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
• Do not use this product near water, for example near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
• The product should be kept free from excessive smoke, dust, high temperature, and vibration. This product should not be exposed to direct sunlight.
• Do not place heavy objects on top of the product. This product may interfere with other electronic products such as TVs, radios, personal computers, phones, or other wireless devices.
• This equipment shall be installed at a height of fewer than 2 meters when sticking to a clean wall.
• Interior Assembly Operating Temperature: -10 °C ~ 55°C (14°F ~ 131°F)
• Exterior Assembly Operating Temperature: -30°C ~ 70°C (-22°F ~ 158°F)

CAUTION!

Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.

Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Explanation of the symbols on the product label

Note: The product label is on the bottom of the product. Symbols may vary from products.

Symbol Explanation
	Class II equipment
	Class II equipment with functional earthing
	Alternating current
	DC voltage
	Polarity of output terminals
[4WWD]	Indoor use only
	Dangerous voltage
	Caution, risk of electric shock
[3WED]	Energy efficiency Marking
	Protective earth
	Earth
	Frame or chassis
	Functional earthing
	Caution, hot surface
	Caution
	Operator's manual
	Stand-by
	"ON"/"OFF" (push-push)
	Fuse
	Fuse is used in neutral N
	RECYCLINGThis product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
	Caution, avoid listening at high volume levels for long periods
	Disconnection, all power plugs
m Switch of mini-gap construction
μ	Switch of micro-gap construction (for US version)Switch of micro-gap / micro-disconnection construction (for other versions except US)
ε Switch without contact gap (Semiconductor switching device)