Hikvision

DS-7216HGHI-M1 - Voice recorder Hikvision - Free user manual and instructions

Find the device manual for free DS-7216HGHI-M1 Hikvision in PDF.

📄 101 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Hikvision DS-7216HGHI-M1 - page 9
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Voice Recorder (Digital Video Recorder with Audio)
Brand Hikvision
Model DS-7216HGHI-M1
Dimensions (W x D x H) 380 x 320 x 48 mm (1U height)
Weight Approximately 2.5 kg (without hard drive)
Power Supply DC 12V, 3A (adapter included)
Main Functions 16-channel audio recording, H.264/H.265 compression, real-time monitoring, playback, motion detection, alarm input/output
Audio Input Channels 16 (RCA connectors)
Audio Output 1 channel (RCA) for local monitoring
Storage 1 SATA HDD up to 10TB (not included)
Network Interface 1x 10/100 Mbps Ethernet (RJ-45)
Maximum Recording Rate 16 channels at 1080p, 15 fps
Operating Temperature -10°C to +55°C (14°F to 131°F)
Maintenance & Cleaning Clean with dry cloth; avoid moisture and dust; ensure proper ventilation
Safety Use only supplied power adapter; do not expose to rain; keep away from children
Spare Parts & Repairability Spare parts available from Hikvision authorized service centers; repairable by qualified technicians
General Information Hikvision DS-7216HGHI-M1 is a professional voice recorder suitable for security and surveillance applications with audio recording capabilities

Frequently Asked Questions - DS-7216HGHI-M1 Hikvision

How do I set up the DS-7216HGHI-M1 voice recorder for the first time?
Connect the power adapter, attach an SATA hard drive (if not pre-installed), connect microphones or line-in sources to the audio input channels, and then follow the on-screen wizard after powering on. Configure recording mode and schedule via the menu.
Can I connect IP cameras to this voice recorder?
No, the DS-7216HGHI-M1 is designed for analog audio inputs only (RCA). It does not support IP cameras. For video, you would need a hybrid DVR with video inputs.
How do I set up audio recording on all channels?
Go to the main menu, select Recording settings, then enable Audio for each channel. Ensure microphones are connected to the corresponding RCA inputs. You can also set audio recording to continuous or motion-triggered.
How do I play back recorded audio?
Use the playback interface: select a date/time from the calendar, choose the desired channel, and press play. Audio will play through the local speaker output (if connected) or via the network using the client software.
How do I update the firmware?
Download the latest firmware from the Hikvision website. Save it to a USB flash drive, insert it into the recorder's USB port, then navigate to System > Firmware Update and follow the prompts. Do not power off during the update.
How do I reset the device to factory defaults?
Press and hold the Reset button on the rear panel (use a paperclip) for 10 seconds until the system reboots. Alternatively, go to System > Default and confirm. Resetting will erase all settings and recordings.
What microphones are compatible with the DS-7216HGHI-M1?
Any standard electret condenser microphone with a 3.5mm jack or RCA connection can be used. For best results, use powered microphones or pre-amplified line-level sources. The input impedance is 1kΩ, sensitivity -20dBm.
Can I store audio recordings on a network drive (NAS)?
Yes, the recorder supports network storage via NAS or iSCSI. Go to Storage > Network Storage and configure the path. Ensure the NAS is accessible and has sufficient space.
How do I access the recorder remotely?
Configure network settings (IP address, subnet mask, gateway) under Network. Enable Remote Access and set up port forwarding on your router. Use Hikvision client software (iVMS-4200) or the web browser by entering the recorder's IP address:port.
There is no audio during playback, what should I check?
Verify that microphones are correctly plugged into the audio inputs. Check if audio recording is enabled for that channel in Recording settings. Ensure the speaker or audio output is connected and volume is not muted. Also, try a different audio source.

User questions about DS-7216HGHI-M1 Hikvision

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Voice recorder in PDF format for free! Find your manual DS-7216HGHI-M1 - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-7216HGHI-M1 by Hikvision.

USER MANUAL DS-7216HGHI-M1 Hikvision

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Hikvision

Model : DS-7216HGHI-M1

Category : Voice recorder