PALADIN BRICK - Lighting Elation - Free user manual and instructions
Find the device manual for free PALADIN BRICK Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Brick Fixture |
| Model | PALADIN BRICK |
| Brand | Elation |
| Light Source | RGBW LED |
| Beam Angle | 60° |
| Dimensions | 245 x 165 x 120 mm |
| Weight | 2.8 kg |
| Power Consumption | 120 W |
| Input Voltage | AC 100-240 V, 50/60 Hz |
| Control Protocol | DMX512, RDM |
| DMX Channels | 4/8 channel modes |
| Functions | Static color, color mixing, strobe, dimmer, auto programs, master/slave, sound active |
| Cooling | Passive convection |
| Housing | Aluminum body, IP20 rated |
| Mounting | Floor, truss, or wall mount with bracket |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety Features | Overheat protection, safety cable attachment point |
| Included Accessories | Power cord, mounting bracket, user manual |
| Spare Parts Available | LED modules, power supply, control board |
| Reparability | Modular design allows component replacement |
| Warranty | 2 years limited |
Frequently Asked Questions - PALADIN BRICK Elation
How do I connect the PALADIN BRICK to a DMX controller?
Use a standard 3-pin XLR cable to connect the DMX IN of the fixture to the DMX OUT of your controller. Set the DMX address using the fixture's menu. Refer to the manual for address settings.
Can I use the PALADIN BRICK outdoors?
No, the PALADIN BRICK is rated IP20, which means it is not waterproof. Use only in indoor or dry locations.
What power cable do I need?
The fixture comes with a power cord suitable for your region. It requires a standard IEC C14 input. Ensure the voltage is within 100-240 VAC.
How do I clean the fixture?
Disconnect power. Use a soft, dry cloth to clean the lens and housing. Avoid harsh chemicals or abrasive materials.
Can I link multiple PALADIN BRICK fixtures together?
Yes, you can daisy-chain power and DMX. Connect DMX OUT of one fixture to DMX IN of the next. Use master/slave mode for synchronized operation without a controller.
What DMX channel modes are available?
The PALADIN BRICK supports 4-channel and 8-channel modes. 4-channel mode controls RGBW and dimmer. 8-channel adds strobe, color macros, and auto effects.
How do I update the firmware?
Firmware updates are done via the DMX link using a compatible updater. Check Elation's website for the latest firmware and instructions.
Why is my fixture not responding?
Check power connections, DMX cable, and address settings. Ensure the fixture is not in sound-active or auto mode if you expect DMX control.
Can I replace the LED module?
Yes, the LED module is replaceable. Contact Elation or an authorized service center for spare parts.
What is the maximum ambient temperature for safe operation?
The operating temperature range is 0°C to 40°C. Avoid prolonged exposure to temperatures above 40°C to prevent overheating.
User questions about PALADIN BRICK Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual PALADIN BRICK - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PALADIN BRICK by Elation.
USER MANUAL PALADIN BRICK Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : PALADIN BRICK
Category : Lighting