SUN-30K-SG01HP3-EU-BM3 - Battery charger V-TAC - Free user manual and instructions
Find the device manual for free SUN-30K-SG01HP3-EU-BM3 V-TAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hybrid Solar Inverter / Battery Charger |
| Brand | V-TAC |
| Model | SUN-30K-SG01HP3-EU-BM3 |
| Rated Output Power | 30 kW |
| Max PV Input Power | 39 kW |
| Max PV Input Voltage | 1000 VDC |
| MPPT Range | 200–850 VDC |
| Battery Voltage Range | 40–60 VDC (LFP) |
| Max Charging Current | 100 A |
| AC Output Voltage | 230/400 VAC (3-phase) |
| Efficiency (Max) | 97.6% |
| Dimensions (W x H x D) | 540 x 720 x 250 mm |
| Weight | About 35 kg |
| Cooling Method | Intelligent forced air cooling |
| Display | LCD touch screen |
| Degree of Protection | IP65 |
| Operating Temperature | -25°C to +60°C |
| Noise Level | < 50 dB(A) |
| Protection Features | Overload, short-circuit, reverse polarity, islanding, overvoltage, over-temperature |
| Communication Ports | RS485, Wi-Fi (optional), CAN |
| Warranty | 5 years (extendable) |
| Compliance | IEC 62109, VDE 0126, EN 50438 |
| Application | On-grid and off-grid solar systems with battery storage |
Frequently Asked Questions - SUN-30K-SG01HP3-EU-BM3 V-TAC
What type of battery is compatible with the SUN-30K-SG01HP3-EU-BM3?
This inverter is compatible with lithium-ion batteries (LFP) with a voltage range of 40–60 VDC. Always check the battery manufacturer's specifications.
Can this unit operate without a battery?
Yes, it can function as a grid-tied inverter without battery storage. However, for backup power or off-grid use, a battery is required.
What is the maximum solar panel input?
The maximum PV input power is 39 kW with a maximum voltage of 1000 VDC. Ensure the strings are configured within the MPPT range (200–850 VDC).
How do I connect the inverter to the internet?
You can connect via the built-in RS485 port or an optional Wi-Fi module. Use the V-TAC monitoring app for remote management.
Is professional installation required?
Yes, installation must be performed by a qualified electrician following local regulations. Improper installation may void the warranty.
What does the LCD display show?
The display shows system status, power flow, battery state of charge, and fault codes. Use the touch screen to navigate menus.
How do I clean the inverter?
Disconnect the power first. Use a dry cloth to wipe the exterior. Do not use water or solvents. Ensure the vents are free of dust.
What should I do if the inverter displays an error code?
Refer to the manual’s troubleshooting section. Common errors include grid faults, over-temperature, or communication errors. Reset the inverter or contact support.
Can this inverter be used for 1-phase systems?
No, this model is designed for 3-phase systems (230/400 VAC). For 1-phase applications, consider a different V-TAC model.
What is the warranty period?
The standard warranty is 5 years. An extended warranty up to 10 years is available for purchase. Registration is required.
User questions about SUN-30K-SG01HP3-EU-BM3 V-TAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Battery charger in PDF format for free! Find your manual SUN-30K-SG01HP3-EU-BM3 - V-TAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SUN-30K-SG01HP3-EU-BM3 by V-TAC.
USER MANUAL SUN-30K-SG01HP3-EU-BM3 V-TAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : V-TAC
Model : SUN-30K-SG01HP3-EU-BM3
Category : Battery charger