KL Fresnel 6 FC PO - Lamp Elation - Free user manual and instructions
Find the device manual for free KL Fresnel 6 FC PO Elation in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Fresnel Spotlight |
| Brand | Elation |
| Model | KL Fresnel 6 FC PO |
| Light Source | 200W RGBW LED |
| Beam Angle | 15° to 55° (zoom) |
| Color Temperature | 2700K - 6500K variable |
| DMX Channels | 5, 6, 7 or 11 selectable |
| Dimming | 0-100% smooth, 16-bit |
| Housing | Aluminum, black finish |
| Dimensions (WxDxH) | 20.5 x 10.2 x 10.2 in |
| Weight | 12.5 lbs |
| Input Power | 100-240V AC, 50/60Hz |
| Power Consumption | 250W max |
| IP Rating | IP20 (indoor use) |
| Cooling | Variable speed fan |
| Operating Temperature | -10°C to 45°C |
| Safety Features | Overheat protection, auto shut-off |
| Accessories Included | Gel frame, barndoors, power cord |
| Maintenance | Clean vents with dry cloth, ensure airflow |
| Repairability | Replaceable LED module, power supply, fan |
| Certifications | CE, ETL, RoHS |
| Warranty | 2 years limited |
Frequently Asked Questions - KL Fresnel 6 FC PO Elation
How do I set the DMX address on the KL Fresnel 6 FC PO?
Press the Menu button to enter the menu. Use the Up/Down buttons to navigate to 'DMX Address'. Press Enter, then set the desired address (1-512) using Up/Down. Press Enter to confirm.
Can the KL Fresnel 6 FC PO be used outdoors?
No, this fixture is rated IP20 for indoor use only. Exposure to moisture or dust may damage the unit.
What is the beam angle range and how do I adjust it?
The beam angle ranges from 15° (spot) to 55° (flood). Adjust by rotating the zoom ring on the front of the fixture.
How do I clean the lens and housing?
Disconnect power. Use a soft, lint-free cloth slightly dampened with water or a mild glass cleaner. Avoid abrasives. Clean the lens gently to avoid scratches.
The fixture does not turn on. What should I check?
Ensure the power cable is securely connected and the power outlet is live. Check the fuse on the unit. If the fuse is blown, replace with the same rating (indicated on the unit). If problem persists, contact support.
Can I replace the LED module myself?
Yes, the LED module is user-replaceable. Disconnect power, remove the back cover, disconnect the LED module cable, and install the new one. Refer to the service manual for detailed steps.
What is the difference between the DMX channel modes?
The fixture has multiple channel modes (5, 6, 7, 11). Mode 5 controls basic dimmer and color mixing. Mode 11 adds enhanced features like strobe, color macro, and effects. Choose based on controller capability.
How do I update the firmware?
Firmware updates are done via a USB connection using the Elation Firmware Update Tool (available on the Elation website). Download the latest firmware, connect the fixture to your computer via USB, and run the tool.
The fan is loud. Is this normal?
The fan speed varies based on temperature. In high ambient temperatures or when the fixture is operated at full power, the fan may run faster and be audible. Ensure adequate ventilation and keep vents clean.
What type of gel frame size does the fixture accept?
The KL Fresnel 6 FC PO accepts standard 7.5-inch gel frames (193mm). The included gel frame slides into the front access slot.
User questions about KL Fresnel 6 FC PO Elation
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lamp in PDF format for free! Find your manual KL Fresnel 6 FC PO - Elation and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KL Fresnel 6 FC PO by Elation.
USER MANUAL KL Fresnel 6 FC PO Elation
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elation
Model : KL Fresnel 6 FC PO
Category : Lamp