GV693A61AD - Dishwasher GORENJE - Free user manual and instructions

Product Type	Built-in Dishwasher
Brand	Gorenje
Model	GV693A61AD
Dimensions (H x W x D)	85 x 60 x 60 cm
Weight	45 kg
Power Supply	220-240 V, 50 Hz
Power Consumption	2100 W
Noise Level	44 dB(A)
Energy Efficiency Class	A+
Number of Place Settings	13
Number of Programs	6
Programs	Eco, Intensive, Normal, Quick, Pre-rinse, Glass
Drying System	Heat exchanger with condensation drying
Water Consumption per Cycle	9.5 L (Eco program)
Child Lock	Yes
Anti-Flood Protection	AquaStop
Adjustable Racks	Yes, height-adjustable upper basket
Display Type	LED digital
Maintenance	Clean filter and spray arms regularly
Spare Parts Availability	Original parts available from Gorenje service centers

Frequently Asked Questions - GV693A61AD GORENJE

How do I install the GV693A61AD dishwasher?

Ensure the installation site has a water supply, drain, and power outlet. Level the dishwasher using the adjustable feet. Connect the inlet hose to a cold water supply (max 60°C). The drain hose can be connected to the sink drain or a dedicated waste pipe. For precise steps, refer to the installation chapter in the user manual.

What detergent should I use?

Use a phosphate-free dishwasher detergent in tablet, powder, or gel form. For best results, use a combined detergent with salt and rinse aid functions. Adjust the dosage according to water hardness.

How do I start a wash cycle?

Load the dishes properly, add detergent, close the door, and press the Power button. Select the desired program (e.g., Eco 50°C for normal soil) using the program selector. Then press Start. The display shows the remaining time.

The dishwasher is not draining water. What should I do?

Check if the drain hose is kinked or clogged. Clean the filter under the lower spray arm. Also inspect the drain pump for obstructions. After resolving, run a drain cycle. If the issue persists, contact service.

How do I clean the filter?

Turn off the dishwasher and remove the lower basket. Unscrew the coarse filter and fine filter assembly. Rinse them under running water, removing any debris. Reassemble and ensure they are properly locked. Clean the filters monthly.

Can I use rinse aid for better drying?

Yes, rinse aid improves drying and prevents water spots. Fill the rinse aid reservoir until the liquid reaches the 'max' mark. Adjust the rinse aid dosage setting (0-6) based on water hardness. Normally, set to 4 for medium hardness.

What does error code E10 mean?

Error code E10 indicates a water intake problem. Check that the water tap is fully open and the inlet hose is not kinked. Also ensure the water pressure is sufficient. After resolving, restart the cycle. If the error persists, the inlet valve may be faulty.

How do I clean the spray arms?

Remove the upper and lower spray arms by unscrewing them. Rinse under running water to remove clogged food particles. Use a toothpick to clear the spray jets. Reattach firmly. Clean every few months for optimal performance.

Is the GV693A61AD suitable for home use?

Yes, it is designed for domestic use. It has 13 place settings, suitable for an average family. It includes programs for various soil levels and features like child lock and anti-flood protection.

Where can I find spare parts for this model?

Authorized Gorenje service centers offer original spare parts. You can also order online through the Gorenje spare parts portal. Common parts include filters, spray arms, racks, and electronic boards.

USER MANUAL GV693A61AD GORENJE

GV693A61AD

Contents

Your dishwasher 4

Safety instructions .... 5

Installation 6

Overflow guard 6

Packaging 6

Disposal 6

Symbols on the appliance 6

Before washing for the first time 7

1. Water hardness 7
2. Basic settings 8

Top up with rinse aid 8

Top up with salt 8

Greener dishwashing 10

Save energy and water 10

Loading the dishwasher 11

Fragile dishes 11

Loading affects the results 11

The dishwasher's baskets 11

Top cutlery tray 11

Upper basket 12

Lower basket 13

Using the dishwasher 14

Add detergent 14

On/Off 15

Select program 15

Select option 16

Start/Stop 17

Status LED light 17

If you want to load more dishes 18

Power failure 18

Once the program has finished 18

The best drying results 18

Unloading the dishwasher 18

Program chart 19

ConnectLife 20

Connect to a network and pair 20

Remote control the dishwasher 21

Remote start the dishwasher 21

Pair more devices 21

Deactivate/activate WiFi connection 21

Remove devices 21

Settings 22

Care and cleaning 24

Top up with rinse aid 24

Top up with salt 24

25 Top up dispenser

Clean the filter 26

Cleaning the spray arms 26

Clean the outside of the dishwasher 27

CLn - Run the Self-clean program 27

Remove blockages 27

Winter storage/transport 28

Troubleshooting 29

General 29

WiFi 34

Installation 35

Safety instructions 35

Setup 35

Drainage connection 36

Connection to water supply 36

Electrical connection 36

Service 37

Number of program cycles 37

Technical data and energy labelling 38

Technical data 38

Information for consumers 38

Information for test institute 38

Declaration of conformity 38

Your dishwasher

Install the dishwasher, see the chapter Installation. Then open the door and press.

The first time the dishwasher is switched on, it is important that you choose the right settings to ensure good dishwashing results. See the chapter Before washing for the first time.

Special program Option Program

eco

Speed wash Eco 55°

Total Dry 1h 65°

Self-clean Delayed start Auto 45-65°

Information on the display

See the chapter Care and cleaning.

Connected to the cloud (Flashes when connecting)

Top up with rinse aid

Top up dishwasher detergent for automatic dosing

Top up with salt

CLn Run the Self-clean program

NOTE!

The control panel only reacts to use when the door is open.

Safety instructions

Read the user manual and keep it in a safe place!

Number of standard place settings: 16

Never use the dishwasher for any purpose other than that specified in these operating instructions.

Do not load the dishwasher door or dishwasher baskets with anything other than dishes.

Never leave the dishwasher door open as someone may trip on it. Push the baskets in to avoid risking the dishwasher tipping over.

Use only dishwasher detergent!

This machine can be used by children aged 8 and upwards, and by people with reduced physical capacity, mental ability, memory loss or lacking experience and knowledge. These individuals must be supervised when using the machine or have instructions on how to use the machine and understand the risks that can occur. Cleaning of the machine must not be carried out by children without supervision.

Damaged supply cord must only be replaced by the manufacturer's service centre or someone similarly professionally qualified.

Only use the dishwasher in household-type environments for dishwashing household dishes. All other use is prohibited.

Never place dishes with solvent residues in the dishwasher due to the risk of explosion. Nor may dishes that contain ash, wax or lubricants be washed in the dishwasher.

Children must be watched. Do not allow children to use or play with the dishwasher. Be especially vigilant when the door is open. Some detergent may remain inside! After adding detergent, always start the dishwasher immediately.

WARNING!

Knives and other pointed items must be placed horizontally in the dishwasher's special cutlery baskets.

WARNING!

Children must be supervised - dishwasher detergent is corrosive!

Installation

See the chapter Installation.

Overflow guard

The overflow guard starts pumping out the water and turns off the water supply if the water level in the dishwasher exceeds the normal level. If the overflow guard is triggered, F54 (Overfilling water) appears on the display. Turn off the water tap and contact your nearest service centre. (To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!)

Packaging

The outer packaging protects the product during transport. The packaging material is recyclable. Separate the different packaging materials to help reduce raw material use and waste. Your dealer can take the packaging for recycling or direct you to the nearest recycling centre. The packaging is comprised of:

• Corrugated cardboard made from up to 100% recycled material.
• Expanded polystyrene (EPS) with no added chlorine or fluorine. • Supports made from untreated wood.
• Protective plastic made from polyethylene (PE).

Disposal

The dishwasher is manufactured and labelled for recycling. When the dishwasher has reached the end of its service life and is to be disposed of, it should immediately be made unusable. Pull out the power cable and cut it as short as possible. Remove the light source/lightsources.

Contact your local authority for information about where and how your dishwasher should be correctly recycled.

Symbols on the appliance

Read the user manual.

Recycle electrical waste.

Approved in accordance with the relevant EU directives.

Approved in accordance with the relevant UK legal requirements.

Before washing for the first time

1. Water hardness

In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral content). Hard water leaves a white coating on dishes and the dishwasher.

Checking water hardness

Water hardness is specified using German degrees of water hardness (°dH), French degrees of water hardness (°fH), English degrees of water hardness (°eH) or millimoles per litre (mmol/l).

A water supply with a water hardness in excess of 5°dH (9°fH/6°eH/0.9 mmol/l) must be softened. This is done automatically with the aid of the built-in water softener. In order for the water softener to function properly, its settings must be adjusted to the hardness of the water supply. Once you have adjusted the water softener settings, add detergent and rinse aid in doses suitable for soft water.

Contact the local waterworks to check the water hardness in your area.

Make a note of the water hardness:

				Recommendedsettingmmol/l°eH°fH°dH
				4:000.0-0.90-60-90-5
				4:011.0-1.47-1010-146-8
				4:021.5-2.011-1415-209-11
				4:032.1-2.515-1821-2512-14
				4:042.6-3.419-2426-3415-19
				4:053.5-4.325-3035-4320-24
				4:064.4-5.231-3644-5225-29
				4:075.3-7.037-4953-7030-39
				4:087.1-8.850-6171-8840-49
				4:098.9628950

If the water hardness exceeds 50° dH (89° fH/62° eH/8.9 mmol/l), we recommend connecting an external water softener.

Increased consumption during regeneration

The dishwasher's built-in water softener is regularly regenerated to maintain its function. Regeneration extends the dishwashing program and increases energy and water consumption. Just how often the dishwasher's water softener is regenerated depends on the selected setting.

Example: If the Eco55° program is run with a water hardness of 14° dH (25° fH/18° eH/2.5 mmol/l), the water softener is regenerated at regular intervals (after 7 dishwashing cycles), energy consumption increases by 0.015 kWh, and water consumption increases by 2.3 litres, while the program time is extended by 3 minutes. Regeneration takes place during the program's main wash.

WARNING!

Hard water leaves a white coating on dishes and inside the dishwasher. It is therefore important that you select the right setting for the water softener! See Water hardness in the chapter Settings.

Never run the dishwasher with an empty salt compartment if the water supply has a water hardness in excess of 5°dH (9°fH/6°eH/0.9 mmol/l).

2. Basic settings

The first time the dishwasher is switched on, it is important that you choose the right settings to ensure good dishwashing results. See page 22.

Setup:

• Rinse aid • Water hardness • TAB (All-in-one detergent) • Automatic dosing of detergent

3. Top up with rinse aid

Drying is faster and a better result is achieved if you use rinse aid. You will also achieve a better dishwashing result with clear and spotless dishes.

Top up the rinse aid compartment with rinse aid if you have selected Rinse aid 3:01-3:05.

1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked MAX. 3. Wipe up any splashes of rinse aid around the compartment.
3. Close the lid firmly.

Whether rinse aid needs topping up, the symbol lights on the display.

4. Top up with salt

For a water supply with a hardness above 5°dH (9°fH/6°eH/0.9 mmol/l), fill with salt.

Add salt to the salt compartment if you have selected Water hardness 4:01-4:09.

1. Remove the salt compartment lid by turning it anticlockwise.
2. Place the funnel supplied with the dishwasher in the salt compartment top-up hole. Before washing for the first time, pour in about 1 liter of water. (Water is only needed the first time.) 3. Add enough salt to fill the salt compartment (max. 750 grams). Use special dishwasher salt.
3. Wipe away excess salt and turn the lid clockwise until it is in the closed position.

When the salt needs topping up, the symbol lights on the display.

WARNING!

In order to avoid rust stains, a dishwashing program must be started immediately after adding salt.

5. Top up dishwasher detergent for automatic dosing

Fill the automatic dosing compartment with dishwasher detergent gel if you have activated the Automatic dosing of detergent setting.

1. Open the lid of the automatic dosing compartment for dishwasher detergent gel.
2. Carefully add dishwasher detergent gel to the level marked MAX.
3. Clean up any excess dishwasher detergent gel outside the compartment. 4. Close the lid firmly.

NOTE!

Use only dishwasher detergent gel in the automatic dosing compartment! Do not use dishwasher detergent powder. Washing-up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.

Some thick dishwasher detergent gels are not suitable for the automatic dosing compartment. Add very thick dishwasher detergent gel into the manual detergent compartment. See the detergent manufacturer's recommendations.

Dishwasher detergent gel has a milder formula than dishwasher detergent powder or all-in-one detergent with bleaching agent. This means that dishwasher detergent gel may prove less effective at removing stains caused by, for example, lipstick and tea/coffee. If necessary, on such occasions dishwasher detergent powder or all-in-one detergent with bleaching agent can be added to the manual detergent compartment (when automatic dosing of detergent is activated). See Add detergent.

When the dishwasher detergent gel needs topping up, the symbol appears on the display. (You can run 1-2 wash programs before the compartment is completely empty.)

Dosing of dishwasher detergent gel

Dishwasher detergent gel is dispensed during the main wash for all programs except Self-clean. A little extra dishwasher detergent gel is also dispensed during the prewash in the following programs:

Auto 45-65°

Intensive 70°

Greener dishwashing

Save energy and water

When using a dishwasher in a residential setting, less energy and water are generally used compared to washing the dishes by hand.

Do not rinse under running water

Do not rinse the dishes under running water as this will lead to increased energy and water consumption.

Simply scrape off large food particles before loading the dishwasher.

Choose a green detergent

Read the environmental declaration on the packaging!

Too much detergent, rinse aid and salt can result in less effective dishwashing and also entail greater environmental impact.

Run a fully loaded dishwasher

Save energy and water by waiting until the dishwasher is full before running a program (see number of standard place settings). Use the 1h 65° program with the Speedwash option to rinse the dishes if there are any unpleasant odours.

Run programs at a lower temperature

If the dishes are only slightly dirty, you can select a program with a low temperature.

Select dishwashing program - Eco 55°

This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign.

The dishwashing program is designed for an effective wash using as little energy and water as possible. The program washes at a low temperature for a long time.

Selection - TotalDry

A shorter dishwashing program and better drying results are achieved if you use the TotalDry option, which automatically opens the dishwasher door. Wait until the dishwasher indicates that the program has ended and the dishes have cooled before unloading the dishwasher. (If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from the dishwasher.)

Connect to cold water

Connect the dishwasher to the cold water supply if the building is heated using oil, electricity or gas.

Connect to hot water

Connect the dishwasher to the hot water supply (max. 70°C) if the building is heated using an energy-efficient means such as district heating, solar power or geothermal power. Choosing a hot water connection reduces the dishwasher's energy consumption.

NOTE!

Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.

Loading the dishwasher

Fragile dishes

Some cookware is not dishwasher safe. This can be for several reasons. Some materials cannot withstand high heat, others can be damaged by dishwasher detergent.

Exercise caution with, for example, handmade items, fragile decoration, crystal/glassware, silver, copper, tin, aluminium, wood and plastic. Look for the "Dishwasher safe" marking.

Loading affects the results

Load the dishes carefully to ensure the best washing and drying results with the lowest possible energy and water consumption. Give your dishwasher the best chance to reach and clean all surfaces, as well as to dry the dishes as thoroughly as possible.

• All dirty surfaces should face inwards and downwards! • Dishes should not be placed in or on each other.
• Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items.
• Make sure small items cannot fall through the dishwasher basket; place them in the top cutlery tray.

The dishwasher's baskets

The dishwasher is equipped with a top cutlery tray, an upper basket and a lower basket.

The appearance of the baskets may differ depending on the dishwasher setup.

Top cutlery tray

The top cutlery tray has space for cutlery, ladles, whisks, serving cutlery and similar items.

The top cutlery tray is comprised of three parts that can be moved sideways to better accommodate the dishes.

Upper basket

Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right.

Raising and lowering the upper basket

1. Pull out the upper basket. 2. Grab the sides of the upper basket with both hands and lift it up. 3. If the upper basket is raised while in the top position, it will drop to the bottom position. Note that both sides of the basket must always be set to the same height.

Adjustable plate supports

The adjustable plate supports can be folded down to make it easier to load pots, bowls and glasses.

Lower basket

Place plates, side plates, serving dishes and pots in the lower basket. Cutlery can be placed in the cutlery holder.

Fit the cutlery holder to achieve maximum loading capacity. (Found inside the enclosed plastic bag.)

Adjustable plate supports

The adjustable plate supports can be folded down to make it easier to load pots and bowls.

NOTE!

Check that the spray arms can rotate freely.

Using the dishwasher

Add detergent

You have two options for adding detergent – manual or automatic. To activate Automatic dosing of detergent, see the chapter Settings. The manual detergent compartment can be used as a supplement even when Automatic dosing of detergent is activated (e.g. for dishwasher detergent with bleaching agent or if the automatic dosing compartment is empty).

Follow the instructions on the detergent packaging. This dishwasher is fitted with a water softener, so use detergent and rinse aid doses suitable for soft water.

Do not add detergent to the manual detergent compartment when using automatic detergent dosing! Too much detergent can result in less effective dishwashing and also entails greater environmental impact.

Manual detergent compartment

The detergent compartment must be dry when adding detergent.

If powder or liquid dishwasher detergent is used, add a small amount of the detergent to the compartment for prewash detergent.

NOTE!

Use only dishwasher detergent! Washing-up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.

All-in-one detergent

There are many types of all-in-one detergents on the market. Read through the directions for these products carefully.

Activate the TAB setting when using an all-in-one detergent that contains rinse aid.

Dishwasher tablets are not recommended for short programs (less than 75 minutes). Use powder or liquid dishwasher detergent instead.

NOTE!

Optimal washing and drying results are achieved by using normal detergent together with separately dispensed rinse aid and salt.

Contact the detergent manufacturer if you have questions about the detergent.

NOTE!

The control panel only reacts to use when the door is open.

On/Off

Open the door and press. Also turn on the water tap if it is turned off.

Select program

Select a program to suit the type of dishes and how dirty they are. Eco 55° is always pre-selected.

Press the desired program until it is activated, which is indicated by an indicator light.

Auto 45-65°

The dishwasher can measure how dirty the dishes are and adjust water consumption and temperature accordingly. When newly installed, the program needs to be run five times before it is fully adapted and can provide the best results.

If Automatic dosing of detergent is activated, the dosage of dishwasher detergent gel is also adjusted.

Eco 55°

This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign.

You can read more about greener dishwashing in the chapter Greener dishwashing.

For heavily soiled dishes with a lot of grease, a program with higher temperatures should be used.

1h65°

A quick program for slightly dried leftovers. (This program is not intended for burnt food, such as oven dishes.)

The Total Dry option is important for ensuring the best drying results.

Intensive 70°

A program with a high temperature for dissolving grease on very dirty dishes, such as pans, casserole dishes and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and other dishes.

Glass 40°

A gentle dishwashing program with a low temperature for washing fragile items made of crystal/glass. Remember to use a small amount of detergent and to place items so that they do not touch each other during the wash. See also Fragile dishes in the chapter Loading the dishwasher. Porcelain that has just been used without dried leftovers can also be washed using this program.

Hygiene 70°

This program is ideal to use where demands on hygiene are extra high, e.g. for baby bottles and cutting boards. The temperature is high both in the main wash and in the final rinse.

Night 55°

A quieter dishwashing program, suitable for running at night. The program time is extended.

Remote (WiFi)

You can remote control this dishwasher with your smartphone/tablet. Connect the dishwasher to your wireless network to be able to remote control and start the dishwasher using the ConnectLife app. See the chapter ConnectLife.

To remote start the dishwasher, press and then. APP will flash on the dishwasher's display. Close the door. The status light will flash slowly, indicating that remote start is activated.

In the ConnectLife app, select and start a program.

If the door is not closed within 2 minutes, the machine switches off.

Self-clean

Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms, and spray pipes.

This program should be run (with no dishes in the machine) using normal dishwasher detergent or citric acid – add it to the dishwasher's manual detergent compartment. (Detergent is not automatically dispensed with the function Automatic dosing of detergent.) Special dishwasher cleaners are also available on the market. For the removal of limescale deposits, see Dishwasher tub in the chapter Care and cleaning.

NOTE!

CLnThe dishwasher will indicate at regular intervals that Self-clean needs to be run.

Selection

Press the options to activate them. (The available options vary between programs.)

Delayed start

When you select Delayed start, the dishwasher will start 1-24 hours after you have pressed and closed the door.

1. Press once to activate Delayed start. Press several times, or hold it in, to set the desired number of hours. The time for Delayed start is shown on the display.
2. Press. Close the door. The timer counts down and the dishwasher starts after the selected delay.

If you want to cancel the Delayed start option, open the door then press and hold for three seconds.

Not available for: Self-clean

Speedwash

This option shortens the program time, but uses more energy and water.

Press to activate the option. The program time is updated on the display.

Not available for: Auto 45-65°, Glass 40°, Hygiene 70°, Night 55°, Self-clean

TotalDry

The dishwasher door opens automatically, which shortens the program time and improves the drying results. Wait until the dishwasher indicates that the program has ended and the dishes have cooled before unloading the dishwasher. (If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from the dishwasher.)

The drying time of the Total Dry option varies (from 5 to 90 minutes) depending on the model, program, and temperature of the final rinse.

Press to activate the option, which is indicated by an indicator light.

The Total Dry option is pre-selected for some programs.

Not available for: Hygiene 70°, Self-clean

NOTE!

For the best drying results, do not close the door before the drying phase has finished and the machine has automatically switched off.

WARNING!

The dishwasher door must not be blocked or closed when opened automatically. Doing so may damage the door lock mechanism. Wait at least 5 minutes before closing the door.

Start/Stop

Press. The display will start to flash, indicating that the dishwasher is ready to start. Close the door properly, otherwise the dishwasher will not start.

To remotely start the dishwasher, see the chapter ConnectLife.

Stopping or changing a program

Open the door. If you want to interrupt or change the program after starting the dishwasher, press and hold for three seconds.

Top up with new detergent if the lid of the detergent dispenser has opened. Then select a new program, press and close the door.

Remaining time

Once you have chosen a program and options, the time the program took when last used is displayed.

Status LED light

The status light on the bottom part of the dishwasher indicates that a program has started.

Flashing light

A flashing light indicates that the door has been opened while a program is in progress. If it flashes when the door is closed, an error has occurred. See the chapter Troubleshooting.

If you want to load more dishes

1)

Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a while, the dishwasher continues the program.

If the dishwashing program was removed, the interrupted program will continue when the door is closed. You can monitor the dishwasher using the ConnectLife app and remotely stop the program, although you will not be able to restart it again.

Power failure

If the dishwasher is turned off due to a power failure while a dishwashing program is running, the program continues when power is restored. If the power is cut during drying, the program is interrupted.

If the dishwashing program was removed and has not ended, the program will continue once the power is restored. You can monitor the dishwasher using the ConnectLife app and remotely stop the program, although you will not be able to remotely start it again.

If you opened the door for more than 2 minutes during drying, the program will be interrupted.

Once the program has finished

The end of the program is indicated by one short signal from the buzzer. The chapter Settings describes how to change this function.

Moreover, the end of the program is indicated by the status light turning off.

Once the dishwasher door is opened and the program has finished, "End" appears on the display.

The dishwasher switches off automatically after the program ends. Shut off the water tap after each use (if required by your insurance company).

The best drying results

• Fully load the dishwasher. - Angle dishes with hollows, such as cups, so that the rinse water will run off. This is also important for plastic items. - Top up with rinse aid or increase the rinse aid dosage setting. - Activate the Total Dry option. - Allow the dishes to cool before unloading the dishwasher.

Unloading the dishwasher

Hot porcelain is more fragile. Leave the dishes to cool in the dishwasher before unloading them.

Unload the lower basket first to avoid any water drops from the upper basket falling onto the dishes in the lower basket.

1) You can load more dishes within 5 minutes after you have started the dishwasher.

Program chart

		OptionDetergent(ml)Program ofprewashes	MainwashNumber	Number ofrinses	Final rinse	Consumptionvalues 1)
						Dishwashing time (approx.hrs:min)	Energy (approx.kWh)	Watercons. (liter)
	25Auto45-65°	3)						11.5-19.00.9-1.42:10-3:1060°C
eco 2)	25Eco55°	3)						9.60.554:0537°C255°C
	251h65°	3)						15.01.11:0065°C365°C
								16.01.62:5070°C270°C225Intel
								10.00.71:4050°C240°C20Glass
								11.01.31:0570°C270°C25Hygie
								14.01.45:3565°C255°C125Nigf

1) Consumption values vary depending on the temperature of the incoming water, room temperature, load size, selected additional functions and more. The values for the Eco 55° program are accurate, others are indicative only. The dishwasher's built-in water softener is regularly regenerated to maintain its function. Regeneration extends the dishwashing program and increases energy and water consumption. Just how often the dishwasher's water softener is regenerated depends on the selected setting. 2) This program is suitable for washing normally soiled dishes and is the most effective program in terms of combined energy and water consumption. This program is used to assess compliance with EU legislation on ecodesign. 3) TotalDry

ConnectLife

ConnectLife is a smart home platform that connects people, devices and services. The ConnectLife application includes advanced digital services and carefree solutions that allow users to monitor and control appliances, receive notifications from a smartphone, and update software (supported features may vary depending on your appliance and the region/country in which you are located).

To connect your smart device, you need a home Wi-Fi network (only 2.4GHz networks are supported) and a smartphone equipped with the application ConnectLife.

To download the ConnectLife application, scan the QR code or search for ConnectLife in your favourite app store.

1. Install the ConnectLife application and create an account.
2. In the ConnectLife application, go to the »Add devices« menu and select the appropriate type of device. Then scan the QR code (it can be found on the serial number plate of the appliance; you can also enter the AUID/SN number manually).
3. The application then guides you through the entire process of connecting the appliance to your smartphone.
4. After a successful connection, the appliance can be operated remotely via a mobile application.

Connect to a network and pair

• In the ConnectLife application, go to the »Add devices« menu and select the appropriate type of device. Then scan the QR code (it can be found on the serial number plate of the appliance; you can also enter the AUID/SN number manually).
• Open the dishwasher door and press. ①
• On the dishwasher's control panel: Press to activate the Wi-Fi module.
• On the dishwasher's control panel: Press and hold for 3 seconds to start connecting. C appears on the display, after which the display starts counting down.

Network symbol on the display

Flashing 0.5 second on/off

The dishwasher is ready to be connected to your wireless network or paired with your smartphone/tablet. The dishwasher is connected to your wireless network. Flashing 1.0 second on/off The dishwasher is connected to your wireless network and the cloud. Glows

Remote control the dishwasher

The dishwasher's network symbol is shown on the display when the dishwasher is paired with a smartphone/tablet. You can use the ConnectLife app to monitor the dishwasher and change settings.

Remote start the dishwasher

To remotely start the dishwasher, press and then. APP will flash on the dishwasher's display. Close the door. The status light will flash slowly, indicating that remote start is activated.

In the ConnectLife app, select and start a program.

If the door is not closed within 2 minutes, the machine switches off.

NOTE!

The dishwasher can always be used without the app. When the dishwasher's control panel is pressed, commands from the ConnectLife app are blocked for 10 seconds.

Pair more devices

Pair more devices/users with the dishwasher.

• In the ConnectLife application, go to the »Add devices« menu and select the appropriate type of device. Then scan the QR code (it can be found on the serial number plate of the appliance; you can also enter the AUID/SN number manually).
• Open the dishwasher door and press. ①
• On the dishwasher's control panel: Press and hold for 4 seconds to start connecting. P appears on the display, after which the display starts counting down.

Deactivate/activate Wi-Fi connection

After connecting the dishwasher to your local network, you can deactivate the Wi-Fi connection. You can then reactivate the Wi-Fi connection to reconnect to the same network.

• On the dishwasher's control panel: Press and hold for 8 seconds to deactivate the Wi-Fi connection. Off appears on the display.
• On the dishwasher's control panel: Briefly press to reactivate the Wi-Fi connection. On appears on the display.

Remove devices

Remove all connected devices/users.

- On the dishwasher's control panel: Press and hold until P is shown on the display. Once a countdown has begun, press and hold for 3 seconds. UnP indicates that all devices/users have been erased.

Do you have questions? Please visit us at www.connectlife.io or contact us at [e-mail].

Settings

1. Open the door and press.
2. To open the dishwasher's settings menu, press and hold and until SEt is shown on the display.
3. Press to step through the settings menu.
4. Press to step through the alternatives.
5. Confirm the selected setting by pressing.
6. To exit the menu, step through it or press.

	AlternativesSettings
		Abeepconfirmsthatthecontrolpanelhasbeenpressed.2:00-2:03Sound:Abeepindicateswhenadishwashingprogramhasended.(2:00Off)Errormessagesarealwaysindicatedbyaloudbuzzer.
Rinseaid	3:00-3:05(3:00Off)	Settingforrinseaiddosage.Therinseaiddispensercan beadjustedbetween3:00(Off)and3:05(Highdosage).Increasetherinseaiddosage:Ifthedisheshavewatermarks.Decreasetherinseaiddosage:Ifthedisheshaveastickywhite/bluefilm.Ifthedishesarestreaked.Build-upoffoam.Ifyouhaveverysoftwater,therinse aidcanbediluted50:50withwater.Pre-selectedatfactory:3:04
Waterhardness	4:00-4:09(4:00Off)	Adjustingthewatersoftener.Selectasettingdepending onthehardnessofthewatersupply.Itisimportantthat thissettingiscorrect!See1WaterhardnessinthechapterBeforewashingforthe firsttime.Forawatersupplywithahardnessabove 5° dH( 9° fH/ 6° eH/0.9mmol/l),fillwithsalt.Forawatersupplywithahardnessbelow 6° dH( 10° fH/ 7° eH/1.0mmol/l),select4:00.Thewatersoftenerisdeactivatedandnosaltneedstobeadded.Pre-selectedatfactory:4:04
TAB(All-in-onedetergent)	5:00(Off)5:01(On)	Activatethesettingwhenusingall-in-onedetergentcontainingrinseaid.(Alsoappliestodishwasherdetergentgel forautomaticdosingthatcontainsrinseaid.)Thissettingreducestherinseaiddosageandaffectshow oftenthedishwasher'sbuilt-insoftenerisregenerated.Pre-selectedatfactory:5:00
Automaticdosingof detergent00-40ml	6:00-6:40(6:00Off)	Activatethissettingifyouwanttouseautomaticdosingof detergent.Theexactdosagedependsonwhichprogramisrunning.FortheAuto45-65°program,thedosagealsodependson howdirtythedishesare.Pre-selectedatfactory:6:25
Interiorlightwhenthe dishwasherisswitched off	8:00(Off)8:01(On)	Selectwhethertheinteriorlightistobeswitchedonwhen thedishwasheristurnedoffandthedoorisopened.(Ifthe dishwasheristurnedon,theinteriorlightisalwaysswitched onwhenthedorisopened.)
		Anyerrormessages.F--ErrorreadoutWhencontactingtheservicedepartment,youmaybeasked toprovidethemostrecenterrormessages.
faults		Restoresallsettingstothefactorydefaults.rStRestorefactorydeSelectrStandconfirmbypressing. ▷□
	EndExit	Toexitthedishwasher'ssettingsmenu,selectEndand press.○(Themenuclosesautomaticallyafterthreeseconds.)

Care and cleaning

Topping up with rinse aid

Whether rinse aid needs topping up, the above symbol lights on the display.

1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked MAX. 3. Wipe up any splashes of rinse aid around the compartment. 4. Close the lid firmly.

After topping up, it may take a while before the symbol goes out.

Topping up with salt

When the salt needs topping up, the above symbol lights on the display.

1. Remove the salt compartment lid by turning it anticlockwise.
2. Place the funnel supplied with the dishwasher into the salt compartment top-up hole. (Water is only needed the first time.) 3. Add enough salt to fill the salt compartment (max. 750 grams). Use special dishwasher salt.
3. Wipe up any excess salt so that the lid can be screwed on firmly.

After topping up, it may take a while before the symbol goes out.

WARNING!

In order to avoid rust stains, a dishwashing program must be started immediately after adding salt.

Never pour dishwasher detergent into the salt compartment. This destroys the water softener!

Top up dishwasher detergent for automatic dosing

When the dishwasher detergent gel has run out and needs to be refilled, the above symbol appears on the display. (You can run 1-2 programs before the compartment is completely empty.)

1. Open the lid of the automatic dosing compartment for dishwasher detergent gel.
2. Carefully add dishwasher detergent gel to the level marked MAX.
3. Clean up any excess dishwasher detergent gel outside the compartment. 4. Close the lid firmly.

NOTE!

Use only dishwasher detergent gel in the automatic dosing compartment! Do not use dishwasher detergent powder. Washing-up liquid must not be used as the foam that forms prevents the dishwasher from operating effectively.

Some thick dishwasher detergent gels are not suitable for the automatic dosing compartment. Add very thick dishwasher detergent gel into the manual detergent compartment. See the detergent manufacturer's recommendations.

Clean the automatic dosing compartment

1. The compartment can be lifted out for cleaning and refilling.
2. Check that the dispensing hole is not blocked. Clean the compartment with hot water.

NOTE!

Important - refit the compartment. The dishwasher must not be used without the automatic dosing compartment in place!

Clean the filter

The filter traps larger food particles, which cannot get past the drainage pump. Empty the filter when necessary. It should be cleaned at regular intervals depending on how often the dishwasher is used.

1. Turn the locking ring anticlockwise and lift the filter straight up.
2. Empty and clean the filter.
3. Refit the filter and turn the locking ring clockwise to its stop position. Check that the edges align properly.

NOTE!

Dishwashing results may be affected if the filter is fitted incorrectly. The dishwasher must not be used without the filter in place!

Cleaning the spray arms

Holes and bearings can sometimes become blocked. Remove any debris using a pin or the like. The spray arms also have holes underneath.

To facilitate cleaning, you can remove the spray arms. Remember to fit them firmly back into place afterwards.

Upper spray arm

• Pull out the upper basket. - Unscrew the spray arm bearings anticlockwise to remove the spray arm from the upper basket.

Lower spray arm

• Pull the lower spray arm straight up to release it.

Clean the outside of the dishwasher

Door and door seal

Open the door. Clean the sides of the door and the door seal regularly with a slightly damp cloth. Clean the door seal at the lower front edge of the dishwasher with a washing-up brush.

Control panel

Keep the control panel clean. If necessary, wipe it with a dry or slightly damp cloth. Never use cleaning products - they may scratch the surface.

CLn - Run the Self-clean program

Dishwasher tub

The dishwasher tub is made of stainless steel and is kept clean through normal use (when used regularly).

If you have hard water, limescale deposits may build up in the dishwasher. If this happens, run the Self-clean program with two tablespoons of citric acid in the dishwasher's manual detergent compartment (with no dishes in the machine). Special dishwasher cleaners are also available on the market.

Remove blockages

Unblocking the drainage pump

If the dishwasher still contains water after the program has finished, something may be blocking the drainage pump, which results in the error message Water outlet fault or BLDC drain pump fault.

1. Turn off the machine using and remove the plug from the wall socket. 2. Remove the coarse filter and the fine filter. 3. Scoop out the water from the dishwasher tub.
2. In order to inspect the drainage pump, remove the yellow drainage pump stop on the right in the bottom drain. (Use a pair of pliers if necessary.) 5. Turn the pump wheel located behind the drainage pump stop by hand. Carefully remove any sharp items, such as glass.
3. Refit the drainage pump stop along with the fine and coarse filters. 7. Plug the machine in again.

NOTE!

Do not forget to refit the drainage pump stop.

Unblocking the inlet hose filter

If the water supply contains small particles, the outer filter on the inlet hose may become blocked, which results in the Water inlet fault error message.

1. Turn off the machine using and remove the plug from the wall socket.
2. Turn off the water tap.
3. Unscrew the inlet hose.
4. Carefully remove the outer filter from the inlet hose and clean it.
5. Refit the filter and check that the gasket is correctly positioned. 6. Screw the inlet hose firmly into place. 7. Plug the machine into the wall socket and turn on the water tap. Allow the pressure to settle for a while and check that the connection is watertight.

Winter storage/transport

Store the dishwasher above freezing temperature and avoid long transport distances in very cold weather. Transport the dishwasher upright or laying on its back.

Before transporting a used dishwasher, or before prolonged storage, water must first be removed from the machine.

Troubleshooting

		ActionErrormessages
	OverfillingwaterF10	Unblockingthedrainagepump.SeethechapterCareandcleaning.Iftheproblempersists,contactyournearestservicecentre.
	WateroutletfaultF11	See"Waterremainsinthedishwasher"under"Problem"inthe tablebelow.Iftheproblempersists,contactyournearestservice centre.
	WaterinletfaultF12	Checkthatthewatertapison.Checkthattheouterfilteronthe inlethoseisnotblocked.SeeUnblockingtheinlethosefilterin thechapterCareandcleaning.Iftheproblempersists,contact yournearestservicecentre.
		Turnoffthewatertapandcontactyournearestservicecentre.Inletvalve
	Heaterfault1F41	Turnoffthewatertap.Removetheplugfromthewallsocketand contactyournearestservicecentre.
		Contactyournearestservicecentre.DiverterfaultF45
	WaterlevelfaultF52	Cleanthecoarseandfinefilters.Checkthattheouterfilteronthe inlethoseisnotblocked.Iftheproblempersists,contactyour nearestservicecentre.
		Turnoffthewatertapandcontactyournearestservicecentre.Overfilling Toavoidwaterleakageoutsidethedishwasher,donotremove theplugfromthewallsocketuntilthewatertaponthesupplyline hasbeenturnedoff!
		Contactyournearestservicecentre.CirculationpumpfaultF56
	WaterinletfaultF67	Checkthatthewatertapison.Checkthattheouterfilteronthe inlethoseisnotblocked.SeeUnblockingtheinlethosefilterin thechapterCareandcleaning.Iftheproblempersists,contact yournearestservicecentre.
	BLDCdrainpumpfaultF68	See"Waterremainsinthedishwasher"under"Problem"inthe tablebelow.Iftheproblempersists,contactyournearestservice centre.

Press any button to clear the error message.

General

		ActionPossiblecausesProblem
Thecontrolpaneldoesnotreact Youhavepressedthecontrol paneltoosoonafteropeningthe door.		Waitamomentthentryagain.
		Thedoorisclosed.
		Dirtonthecontrolpanel.
	Thecontrolpanelrequirescalibration.	Turnoffthewatertap.Remove theplugfromthewallsocket andwaitfor60seconds.Then plugtheappliancebackinto the wallsocketandturnonthewa-tertap.
Cannotclosedoor.	Thebasketsarenotcorrectly positioned.	Checkthatthebasketsarecor-rectlypositionedhorizontally.
		Checkthatthedishesarenot blockingthebasketsfromslid-ingproperlyintoplace.
	Thedoorlockdoesnotclickin-toplaceandlock.	Checkthedoorlock.Ifitdoes notclickintoplaceandlock, openthedor. PressandholdTotalDryuntil thedisplaystartscounting down.Waituntilhecountdown ends(60seconds).Closethe door.Checkthatthedoorlock clicksintoplaceandlocks.
Thedishwasherdoesnotstart.	hasnotbeenpressed.	Press.Thedisplaystarts countingdown.
		Check.Thedoorisnotproperlyclosed.
	Youhaveopenedthedishwash-ertoaddmoredisheswhilea programisinprogress.	Closethedoorandwait.After awhile,thedishwashercontin-uestheprogram.
	Thedoorlockhasnotclicked intoplaceandlocked.	Checkthedoorlock.Ifitdoes notclickintoplaceandlock, openthedor. PressandholdTotalDryuntil thedisplaystartscounting down.Waituntilhecountdown ends(60seconds).Closethe door.Checkthatthedoorlock clicksintoplaceandlocks.
	CheckwhethertheDelayed startoptionhasbeenselected.	Pressandholdforthree secondsifyouwanttocancel theDelayedstartoption.
	wallsocket.	Check.Theplugisnotpluggedinto the
	tripped.	Check.Afuse/circuitbreakerhasbeen
	Thesprayarmsdonotrotate.Thedis	Clearathedileadishesarenot blockingthesprayarms.
	Sprayarmholesorbearings blocked.	Cleanthesprayarms.Seethe chapterCareandcleaning.
	Unsuitabledishwashingprogram.	Selectaprogramwithahigh temperaturetodissolvegrease onverydirtydishes,suchasIntensive70°.
	Incorrectdetergentdosage.	Doseaccordingtowaterhardness.Fartoomuchorfartoolittledetergentresultsinpoorer dishwashingresults.
	perishableproduct.	Avoidlargepackages.Olddetergent.Deterg
	Automaticdosingofdetergent isactivated,butdishwasher detergentgelisnotdispensed.	Tocheckthatdetergentisdispensed,pressandholdandforfiveseconds.Thesymbolwillflashonthedisplayand thestatuslightwillturnon.Now checkwhetheranydishwasher detergentgelhasbeendispensed.
	Dishesloadedincorrectly.	Donotcoverporcelainwith largebowlsorthelike.Avoid placingverytallglassesinthe cornersofthebaskets.Seethe chapterLoadingthedishwasher.
	overduringtheprogram.	Placedishestositsteady.Glassesandcupsh
		Cleanthecoarseandfinefilters.Thefiltersare
	Thefiltersarenotfittedcor-rectly.	Checkthatthefiltersarefitted correctly.SeethechapterCare andcleaning.
	Drainagepumpstopmissing.	Checkthattheyellowdrainage pumpstop(ontherightinthe bottomdrain)isinplace.See thechapterCareandcleaning.
Spotsonstainlesssteelorsilver.	Somefoodstuffs,suchasmustard,mayonnaise,lemon,vinegar,saltanddressings,can causespotsonstainlesssteel ifleftfortoolong.	Rinseoffthesetypesoffood-stuffsifnotstartingthedish-washerimmediately.Consider using1h65°withtheSpeed washoption.
	Allstainlesssteelcancause spotsonsilveriftheycomeinto contactduringdishwashing. Aluminiumcanalsocausespots ondishes.	Inordertoavoidmarksandtar-nishing,separatedishesmade fromdifferentmetals,suchas silver,stainlesssteelandalu-minium.
Spotsorfilmsonthedishes.	ting.	SeethechapterSettings.Incorrectrinseaidd
	ThesettingTABisactivatedand all-in-onedetergentwithinsufficientdryingeffectisbeingused.	Switchall-in-onedetergentsor deactivatetheTABsettingand topupwithsaltandseparate rinseaid.SeeRinseaidinthe chapterSettings.
	Saltcompartmentempty.	Topupwithsalt.Seethe chapterBeforewashingforthe firsttime.
	Incorrectwatersoftenersetting.	SeeWaterhardnessinthe chapterSettings.
	Thewatersoftenerisleaking salt.	Checkthatthesaltcompartmentlidisproperlytightened. Otherwisecontactyournearest servicecentre.
	Toohightemperatureand/or toomuchdetergentcancause etchingoncrystal.Unfortunately,thiscannotberepaired, onlyprevented.	Washcrystalatalowtemperatureandwithaconservative amountofdetergent.Contact thedetergentmanufacturer.
Thedisheshaveasticky white/bluefilm.	Rinseaiddosagesettingtoo high.	Reducethdosage.Seethe chapterSettings.Ifyouhave verysoftwater,youmaywant todilutetherinseaaid50:50with water.
Spotsleftafterwashing.	Lipstickandtea/coffeestains canbedifficulttoremove.	Useadetergentwithableachingagent.
		Dishwasherdetergentgelisbeingused.lfnecessary,onsuch occasionsdishwasherdetergent powderorall-in-onedetergent withbleachingagentcanbe addedtothemanualdetergent compartment(whenAutomatic dosingofdetergentisactivated).SeeAdddetergent.
Detergentresidueinthedeter-gentcompartmentafterdish-washing.	The detergentcompartment wasdampwhenaddingdeter-gent.	The detergentcompartment mustbedrywhenaddingdeter-gent.
	The detergentcompartmenthas beenblocked.	Checkthatthedishesarenot preventingthedetergentcom-partmentfromopening.
Rattlingsoundwhendishwash-ing.	Thedishesarenotcorrectly placedorthesprayarmsarenot rotating.	Checkthatthedishesare placedsecurely.Spinthespray armstomakesuretheycanro-tate.
er.	Thefiltersarenotfittedcor-rectly.	Cleanthecoarseandfinefilters.TheCheckthatthefiltersarefitted correctly.SeethechapterCare andcleaning.
	Debrisinthedrainagepump.	Cleanthedrainagepump.See thechapterCareandcleaning.
	Drainagepumpstopmissing.	Checkthattheyellowdrainage pumpstop(ontherightinthe bottomdrain)isinplace.See thechapterCareandcleaning.
	Kinkindrainagehose.	Checkthatthehoseisfreefrom kinksandsharpbends.
	Blockeddrainagehose.	Disconnectthedrainagehose whereitconnectstothesink unit'swatertrap.Checkthatno debrishasfastenedandthatthe connectionhasaninnerdiamet- erofatleast14mm.
Badodourindishwasher.	Dirtaroundthesealsandin corners.	Cleanwithwashing-upbrush andlowfoamingcleaner.
	Lowtemperatureprograms havebeenselectedforapro- longedperiod.	Runaprogramwithahightem- peratureonceortwiceamonth. Orrunaself-cleaningprogram. SeeSelf-cleaninthechapter Usingthedishwasher.
Greasedepositsinthedish- washer.	Lowtemperatureprograms havebeenselectedforapro- longedperiod.	Selectaprogramwithahigh temperaturetodissolvegrease onverydirtydishes,suchasIntensive70°.Orrunaself-clean- ingprogram.SeeSelf-cleanin thechapterUsingthedishwas- er.
Thedishesarenotdryenough.	activated.	ActivatetheTotalDryoption.TheTo
	loaded.	Fullyloadthedishwasher.Thedish
	Rinseaidneedstoppingupor dosageissettoolow.	Topupwithrinseaidorin- creasetherinseaiddosage setting.
	ThesettingTABisactivatedand all-in-onedetergentwithinsuffi- cientdryingeffectisbeingused.	Switchall-in-onedetergentsor deactivatetheTABsettingand topupwithsaltandseparate rinseaid.SeeRinseaidinthe chapterSettings.

WiFi

		ActionPossiblecausesProblem
Thedishwasher'snetworksymbol doesnotappearonthe display.	Thedishwasherisnotconnectedtoyourwirelessnetwork.	Connectthedishwashertoyourwirelessnetwork.SeethechapterConnectLife.
	ated.SeeDeactivate/activateWiFi	ActivatetheWiFiconnection.TheWiFiconnectioninthechapterConnectLife.
WiFiconnectionfailed	Thedishwashercannotaccess yourwirelessnetwork.Ortherouterisnotconnectedtothe internet.	Checkthattherouterisconnectedtotheinternet.
		Makesureyourwirelessnetworkisusing2.4GHzandis visible.Trymovingtherouter closertothedishwasherifthe signalistooweak.
		Seealsotroubleshootingat www.connectlife.io.Iftheproblempersists,contact yournearestservicecentre.
Pairingfailed	Yoursmartphone/tabletisnot connectedtoyourwirelessnetwork.Ortherouterisnotconnectedtotheinternet.	Checkthattherouterisconnectedtotheinternet.
		Checkthatyoursmartphone/tabletisconnectedtoyourwireless network.
		Seealsotroubleshootingat www.connectlife.io.Iftheproblempersists,contact yournearestservicecentre.
Thedishwasherisshownas disconnectedintheConnectLife app.	ated	ActivatetheWiFiconnection.TheWiFi connectioninthechapterConnectLife.
		Sealsotroubleshootingat www.connectlife.io.Iftheproblempersists,contact yournearestservicecentre.
Softwareupdatefailed.	Thenetworkconnectionwas lostorthedishwasherlost powerduetoapowerfailure.	Makesurethatthepowersupplyisnotinterruptedandthat thenetworkconnectionisstable beforetryingagain.Iftheproblempersists,contact your nearestservicecentre.

Installation

It is important that you read through and follow the instructions and directions below. Conduct installation and connection in accordance with these separate installation instructions.

*Remove the plastic strips if the recess dimension is 596-598 mm. Exercise caution! The edges may be sharp. Wear protective gloves! **Cover door length. Nominal dimensions. Actual measurements may vary.

Safety instructions

• Connections to electricity, water and drainage must be performed by a qualified professional. • Always follow applicable regulations for water, drainage and electricity. • Take care during installation! Wear protective gloves! There must always be two people!
• Place a drip tray on the floor beneath the dishwasher to prevent damage from any water leaks.
• Before screwing the dishwasher into place, test the dishwasher by running the 1h65° program with the Speedwash option. Check that the dishwasher fills with water and drains. Check also that none of the connections leak.

WARNING!

Turn off the water supply when installing the dishwasher!

The plug must be disconnected or power to the socket turned off while the work is carried out!

Setup

• The recess and connection dimensions are included in the separate installation instructions. Check that all dimensions are correct before starting the installation. Note that the height of the cover door can be adjusted to match other fittings.
• Make sure the area on which the dishwasher is to be installed is firm. Adjust the adjustable feet so that the dishwasher is level.
• If the dishwasher is built-in, the surrounding furnishings must be resistant to any condensation from the dishwasher.
• Mount the protective film beneath the worktop and up around the edge. The function of the protective film is to protect the worktop from moisture. (The protective film is in the enclosed plastic bag.)
• Check that the machine is installed such that the door opens freely, otherwise door lock functionality may be disrupted.
• Note that the door springs may need adjusting after a cover door has been fitted. Adjust the left and right door springs equally until the door is evenly balanced.

Drainage connection

This dishwasher is suitable for installing in a raised recess (to attain an ergonomic working height). This means that the dishwasher can be placed so that the drainage hose runs to a lower level than the bottom of the dishwasher, such as by routing it directly to a floor drain.

The drainage hose can also be connected to a connection nipple on the sink unit's water trap. The connection nipple must have an internal diameter of at least 14 mm.

The drainage hose may be extended by a maximum of 3 m (the total length of the drainage hose must not exceed 4.5 m). Any joints and connecting pipes must have an internal diameter of at least 14 mm.

No part of the drainage hose may be more than 950 mm above the bottom of the dishwasher.

Attach the drainage hose with a hose clamp. Ensure that the drainage hose has no kinks.

Connection to water supply

Use only the inlet hoses supplied with the dishwasher. Do not re-use old or other spare hoses.

The supply pipe must be fitted with a water tap (stopcock). The water tap must be easily accessible, so that the water can be shut off if the dishwasher has to be moved.

Once the installation is complete, turn on the water tap and allow the pressure to settle for a while. Check that all connections are watertight.

Connection to cold water supply

Connect the dishwasher to the cold water supply if the building is heated using oil, electricity, or gas.

Connection to hot water supply

Connect the dishwasher to the hot water supply (max. 70°C) if the building is heated using an energy-efficient means such as district heating, solar power, or geothermal power. Choosing a hot water connection reduces the dishwasher's energy consumption.

NOTE!

Do not exceed the permitted water supply temperature. Certain materials used in some cookware cannot withstand high heat. See Fragile dishes in the chapter Loading the dishwasher.

Electrical connection

Information about the electrical connection can be found on the serial number plate. This specification must match the electricity supply.

The dishwasher must be connected to an earthed socket.

The electric wall socket must be placed outside of the installation area to be easily accessible after installing the dishwasher. Do not use an extension cord!

Service

Read the chapter Troubleshooting before contacting the service centre. If you have encountered a problem that you cannot resolve, please contact your nearest service centre for professional help, see www.gorenje.com. Our website also has information about spare part availability and what you can repair yourself.

When making contact, provide the details on the serial number plate. Include the article number (1) and the serial number (2).

Please note that non-professional repairs may risk user safety and affect the warranty.

Number of program cycles

Press and hold [button] for 3 seconds to show the number of program cycles on the display.

(If the dishwasher has completed more than 999 cycles, the number of thousands is displayed followed by the number of cycles up to 999. For example: 1234 cycles is displayed as 001 followed by 234.)

Technical data and energy labelling

Technical data

	816-890mmHeight:
	598mmWidth:
	555mmDepth:
Weight:	30kg 1)
Numberofstandardplacesettings:	16 2)
	0.03-1.0MPaWaterpressure:
	SeetheserialnumberplateElectricalconnection:
	SeetheserialnumberplateRatedpower:

1) Weight can vary due to different specifications. 2) In accordance with the EN 60436 standard.

Information for consumers

Information about your appliance can be found at www.gorenje.com. You can also find information in the EU Product Registration database for Energy Labelling, EPREL. Scan the QR code on the energy label supplied with the dishwasher (or go to https://eprel.ec.europa.eu and search for the model name).

This appliance contains a light source/light sources of energy efficiency class D. Light sources are available as spare parts and can be replaced by your nearest service centre or a qualified professional.

Information for test institute

Information about this product can be found in the European Product Database for Energy Labelling, EPREL, and can also be ordered by e-mail: [e-mail].

The request should include the details on the serial number plate. Include the article number (1), the serial number (2) and the model name (3).

Declaration of conformity

We hereby declare that this appliance is in conformity with the relevant European directives and the requirements of the relevant standards.

Your notes

gorenje

www.gorenje.com

921872-a4