PFS4218-16GT-230 - Switch Dahua Technology - Free user manual and instructions
Find the device manual for free PFS4218-16GT-230 Dahua Technology in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit Switch |
| Ports | 16 x 10/100/1000Base-T RJ45, 2 x Combo Gigabit SFP |
| Power Supply | AC 100-240V, 50-60Hz |
| Power Consumption | ≤20W (typical) |
| Dimensions (W x D x H) | 440 x 200 x 44 mm (1U) |
| Weight | 2.2 kg |
| Switching Capacity | 36 Gbps |
| MAC Address Table | 8K entries |
| VLAN Support | IEEE 802.1Q, up to 4094 VLANs |
| Management | Web-based GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Safety Certifications | CE, FCC |
| Included Accessories | Power cord, mounting brackets, user manual |
| Casing | Metal rackmount |
| LED Indicators | Power, System, per-port Link/Activity |
| Switching Mode | Store-and-forward |
| Jumbo Frame Support | Up to 9K bytes |
| MTBF | >100,000 hours |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety Precautions | Use grounded power outlet; do not expose to moisture |
| Spare Parts & Repairability | Contact Dahua technical support for spare parts and repairs |
| General Information | Managed gigabit switch suitable for enterprise networks |
Frequently Asked Questions - PFS4218-16GT-230 Dahua Technology
How to reset the switch to factory defaults?
Press and hold the Reset button on the front panel for at least 10 seconds using a paperclip. The device will reboot with factory settings.
What is the default IP address of the switch?
The default IP address is 192.168.1.1. Make sure your PC is on the same subnet (e.g., 192.168.1.x) to access the web interface.
What are the default username and password?
The default login credentials are admin for both username and password. It is recommended to change them after first login.
How to access the web management interface?
Connect your PC to any of the switch's RJ45 ports. Set your PC's IP address to 192.168.1.x (e.g., 192.168.1.100). Open a web browser and enter http://192.168.1.1.
Does this switch support Power over Ethernet (PoE)?
No, the PFS4218-16GT-230 does not support PoE. It is a non-PoE switch. Power is supplied only to the switch itself via the AC power cord.
How to configure VLANs?
Log into the web interface and go to VLAN > 802.1Q VLAN. Create a new VLAN ID, assign tagged or untagged ports, and apply the changes.
How to update the firmware?
Download the latest firmware from the Dahua Technology website. In the web interface, go to System > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
What is the maximum cable length for copper ports?
For standard Cat5e or better cable, the maximum length is 100 meters (328 feet). For fiber SFP modules, the range depends on the module (up to 10 km or more).
How to configure port mirroring?
Go to Monitoring > Port Mirroring. Select the source port(s) and the destination (monitor) port. Enable the session and apply.
Can the switch be rack-mounted?
Yes, the switch comes with rack-mount brackets and can be installed in a standard 19-inch rack. Attach the brackets to the sides and secure with screws.
User questions about PFS4218-16GT-230 Dahua Technology
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual PFS4218-16GT-230 - Dahua Technology and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PFS4218-16GT-230 by Dahua Technology.
USER MANUAL PFS4218-16GT-230 Dahua Technology
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dahua Technology
Model : PFS4218-16GT-230
Category : Switch