SDS1202X-E - Measuring equipment Siglent - Free user manual and instructions
Find the device manual for free SDS1202X-E Siglent in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Oscilloscope |
| Brand | Siglent |
| Model | SDS1202X-E |
| Bandwidth | 200 MHz |
| Number of Channels | 2 |
| Sample Rate | 1 GSa/s (real-time) |
| Memory Depth | 14 Mpts per channel |
| Display | 7-inch TFT LCD, 800 x 480 pixels |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Time Base Range | 2 ns/div to 100 s/div |
| Input Impedance | 1 MΩ ± 2%, 18 pF ± 3 pF |
| Maximum Input Voltage | CAT I 300 Vrms, 400 Vpk |
| Trigger Types | Edge, Pulse, Slope, Video, Pattern, etc. |
| Connectivity | USB Host, USB Device, LAN, Pass/Fail |
| Dimensions (W x H x D) | 306 x 158 x 152 mm |
| Weight | Approx. 2.6 kg |
| Power Supply | AC 100-240 V, 50/60 Hz, 50 W max |
| Operating Temperature | 0°C to +40°C |
| Storage Temperature | -20°C to +70°C |
| Maintenance and Cleaning | Clean exterior with a soft dry cloth; avoid solvents. Calibrate annually. |
| Safety | Overvoltage category CAT I; use only provided power cord. Do not exceed input limits. |
| Spare Parts and Repairability | Contact Siglent authorized service centers for repairs; spare parts available via support. |
| General Information | Includes probes (2x), power cord, USB cable, quick start guide, and software CD. |
Frequently Asked Questions - SDS1202X-E Siglent
What is the bandwidth of the Siglent SDS1202X-E oscilloscope?
The bandwidth is 200 MHz, suitable for a wide range of general-purpose measurements.
How do I update the firmware on my SDS1202X-E?
Download the latest firmware from Siglent's website, save it to a USB drive, then go to Utility -> Update Firmware on the scope and follow prompts. Ensure the scope is powered via AC.
What is the maximum real-time sample rate?
The maximum real-time sample rate is 1 GSa/s per channel when using both channels, and 2 GSa/s in interleaved mode with one channel.
Can I connect the oscilloscope to a computer?
Yes, via USB or LAN. You can use Siglent's EasyScopeX software for remote control and data transfer.
How many points of memory does the SDS1202X-E have?
It has a maximum memory depth of 14 Mpts per channel (28 Mpts in interleaved mode).
What triggers are available on this oscilloscope?
It supports Edge, Pulse, Slope, Video, Pattern, Duration, Serial (I2C, SPI, UART, CAN, LIN), and more.
Does the SDS1202X-E include a function generator?
No, it does not have a built-in function generator. However, it can perform FFT analysis and basic math functions.
What is the input impedance of the probes?
The input impedance is 1 MΩ ± 2% in parallel with 18 pF ± 3 pF.
How do I perform a self-calibration?
Disconnect all inputs, go to Utility -> Self Cal, and follow instructions. The process takes a few minutes and ensures measurement accuracy.
What is the warranty period for the SDS1202X-E?
Standard warranty is 3 years for parts and labor, extendable through registration.
User questions about SDS1202X-E Siglent
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SDS1202X-E - Siglent and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SDS1202X-E by Siglent.
USER MANUAL SDS1202X-E Siglent
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Siglent
Model : SDS1202X-E
Category : Measuring equipment