MX-VYNL - Uncategorized Musical Fidelity - Free user manual and instructions
Find the device manual for free MX-VYNL Musical Fidelity in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Phono Preamplifier |
| Supported Cartridges | Moving Magnet (MM) and Moving Coil (MC) |
| Input Impedance (MM) | 47 kΩ |
| Input Impedance (MC) | 100 Ω, 500 Ω, 1 kΩ (adjustable) |
| Gain (MM) | 40 dB |
| Gain (MC) | 60 dB |
| Output Level | 2.5 V RMS |
| Frequency Response | 10 Hz – 100 kHz (±0.5 dB) |
| Total Harmonic Distortion (THD) | < 0.001% |
| Signal-to-Noise Ratio | > 80 dB (MM), > 70 dB (MC) |
| Subsonic Filter | Yes, 20 Hz |
| Inputs | 1x RCA pair (phono) |
| Outputs | 1x RCA pair (line level) |
| Power Supply | External 12V DC, 1A |
| Power Consumption | < 15W |
| Dimensions (W x H x D) | 220 x 90 x 300 mm |
| Weight | 3.5 kg |
| Chassis Material | Aluminum |
| Cleaning | Use a dry, soft cloth. Avoid solvents. |
| Safety Instructions | Avoid moisture, do not open, disconnect when not in use. |
Frequently Asked Questions - MX-VYNL Musical Fidelity
What cartridges can I use with the MX-VYNL?
The MX-VYNL supports both Moving Magnet (MM) and Moving Coil (MC) cartridges. It offers adjustable input impedance and gain for MC to match various cartridges.
How do I set the correct gain for my cartridge?
Use the gain switches on the rear panel: for MM cartridges, set to 40 dB. For MC, choose 60 dB for low-output or 50 dB for high-output MC cartridges. Consult your cartridge specifications.
Can I connect the MX-VYNL directly to powered speakers?
Yes, the line-level output can be connected to powered speakers or an amplifier. Ensure the amplifier has a phono input or use the AUX input.
What is the subsonic filter for?
The subsonic filter removes low-frequency rumble below 20 Hz, such as turntable motor noise or record warps, reducing subwoofer strain and improving clarity.
My MX-VYNL is humming. What should I do?
Hum can be caused by ground loops. Ensure the turntable and preamp are properly grounded. Check all connections and cables. Avoid placing the preamp near power supplies.
Does the MX-VYNL require a power adapter?
Yes, it requires an external 12V DC, 1A power adapter. Use only the supplied adapter to avoid damage.
Can I use the MX-VYNL with a vintage turntable?
Yes, it works with any turntable that has a standard RCA output. Ensure the turntable has a ground wire to connect to the preamp's ground terminal.
How do I clean the MX-VYNL?
Use a dry, soft cloth to wipe the outer casing. Do not use any liquids or solvents. For the vents, gently dust with a brush.
What is the warranty period for the MX-VYNL?
Musical Fidelity typically offers a 2-year warranty from the date of purchase. Check with your dealer or the official website for terms.
Can I adjust the input impedance for MC cartridges?
Yes, the MX-VYNL provides selectable loading: 100 Ω, 500 Ω, and 1 kΩ. Use the appropriate setting for your MC cartridge to optimize frequency response.
User questions about MX-VYNL Musical Fidelity
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MX-VYNL - Musical Fidelity and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX-VYNL by Musical Fidelity.
USER MANUAL MX-VYNL Musical Fidelity
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Musical Fidelity
Model : MX-VYNL
Category : Uncategorized