UB 12H - Uncategorized American DJ - Free user manual and instructions
Find the device manual for free UB 12H American DJ in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Light Fixture |
| Model | UB 12H |
| Brand | American DJ |
| Dimensions (L x W x H) | 11.8 x 8.7 x 10.2 inches |
| Weight | 5.5 lbs |
| Power Consumption | 100W |
| Power Supply | AC 100-240V, 50/60Hz |
| Light Source | 12 x 10W RGBW LEDs |
| Beam Angle | 25 degrees |
| Control Protocol | DMX512, Master/Slave, Sound Active |
| DMX Channels | 4, 7, or 9 channels selectable |
| Operating Modes | Standalone, DMX, Master/Slave, Sound Active |
| Housing Material | Aluminum and plastic |
| Cooling System | Convection cooled |
| IP Rating | IP20 (indoor use only) |
| Mounting Options | Floor standing or hanging bracket |
| Maintenance | Clean lens with soft dry cloth; avoid solvents |
| Safety Features | Overheat protection, safety cable loop |
| Spare Parts | LED modules, power supply, DMX board available |
| Repairability | Modular design; user-replaceable components |
| Accessories Included | Power cord, mounting bracket, user manual |
Frequently Asked Questions - UB 12H American DJ
How do I set up the UB 12H for the first time?
Connect the power cord to a suitable AC outlet. Use the included mounting bracket to place the fixture on a stable surface or hang it securely. Set the DMX address using the control panel if using DMX control.
What are the DMX channel modes available?
The UB 12H offers three DMX channel modes: 4-channel, 7-channel, and 9-channel. Refer to the user manual to select the mode that best fits your setup.
Can I use the UB 12H without a DMX controller?
Yes, the fixture can operate in standalone modes such as Sound Active or Master/Slave. In Sound Active mode, it reacts to music via the built-in microphone.
How do I clean the UB 12H?
Use a soft, dry cloth to gently wipe the lens and housing. Do not use solvents or abrasive cleaners. Ensure the unit is unplugged before cleaning.
What safety precautions should I take?
Always use a safety cable when hanging the fixture. Do not expose to moisture or extreme heat. Disconnect power before servicing. Ensure proper ventilation around the unit.
Why are the LEDs not lighting up?
Check that the power cord is securely connected and the outlet is working. Verify the DMX address and settings if using DMX. Also, ensure the fixture is not in standby mode.
Can I replace the LEDs myself?
Yes, the LED modules are user-replaceable. Contact American DJ support or an authorized dealer to purchase replacement modules. Follow the manual for instructions.
What is the maximum number of units I can daisy-chain?
In daisy-chain configuration, you can connect up to 32 units on a single DMX line. Use proper DMX cables to avoid signal degradation.
How do I reset the UB 12H to factory settings?
Press and hold the 'Menu' button for about 3 seconds until the display shows 'Reset'. Confirm by pressing 'Enter'. The fixture will restore default settings.
What does the 'Sound Active' mode do?
In Sound Active mode, the fixture's LEDs flash and change colors in response to the rhythm and volume of ambient music. It is ideal for automatic light shows.
User questions about UB 12H American DJ
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual UB 12H - American DJ and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UB 12H by American DJ.
USER MANUAL UB 12H American DJ
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : American DJ
Model : UB 12H
Category : Uncategorized