PerformaBe C128Be - Speaker Revel - Free user manual and instructions
Find the device manual for free PerformaBe C128Be Revel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Ceiling Speaker |
| Brand | Revel |
| Model | PerformaBe C128Be |
| Woofer Size | 8 inches (203 mm) Micro-Ceramic Composite (MCC) Cone |
| Tweeter Size | 1 inch (25 mm) Aluminum Dome with Ceramic Coating |
| Frequency Response | 55 Hz – 25 kHz (-6 dB) |
| Sensitivity | 89 dB (2.83 V @ 1m) |
| Impedance | 8 ohms (nominal) |
| Power Handling (Recommended) | 20 – 150 watts RMS |
| Crossover Frequency | 2.5 kHz |
| Crossover Type | 2nd-order (12 dB/octave) high-pass and low-pass |
| Inputs | Spring-loaded binding posts |
| Cutout Dimensions | 10.25 inches (260 mm) diameter |
| Mounting Depth | 4.75 inches (121 mm) |
| Overall Dimensions (Grille) | 11.25 inches (286 mm) diameter |
| Weight (each) | 6.5 lbs (2.9 kg) |
| Grille Material | Magnetically attached, paintable metal grille |
| Enclosure Material | High-impact ABS plastic with rubber rear cover |
| Warranty | 5 years (limited) |
| Recommended Use | Stereo, home theater, whole-house audio |
| Cleaning Instructions | Wipe grille with a dry cloth; avoid liquids on speaker cone |
| Safety Certifications | CE, UL, RoHS |
Frequently Asked Questions - PerformaBe C128Be Revel
What tools are needed for installation?
You will need a drywall saw or hole cutter, a screwdriver, and a wire stripper. The speaker includes a cutout template.
Can the grille be painted to match the ceiling?
Yes, the metal grille is paintable. Remove the grille, clean it, and apply thin coats of spray paint. Allow it to dry completely before reattaching.
What type of speaker wire should I use?
Use 16-gauge or 14-gauge two-conductor speaker wire for runs up to 50 feet. For longer runs, use 12-gauge wire to minimize resistance.
How do I connect the speaker?
Connect the positive (+) and negative (-) terminals from your amplifier to the corresponding spring-loaded binding posts on the back of the speaker. Ensure correct polarity.
Is the speaker suitable for bathrooms or outdoor use?
No, the C128Be is designed for indoor use only and is not rated for moisture. For damp environments, consider Revel's outdoor-rated models.
What is the recommended mounting height?
For optimal sound, mount the speakers at ceiling height (standard 8-10 ft). Avoid placing them too close to walls or corners.
Can I use the C128Be as a rear surround speaker?
Yes, it works well as a surround or height channel in a Dolby Atmos setup. Install directly above or behind the listening position.
How do I adjust the tweeter level?
Some models include a tweeter level switch on the front baffle. Refer to the manual for exact location; typically, it offers -3dB, 0dB, or +3dB settings.
What is the power requirement?
There is no separate power supply; the speaker is passive and derives power from the amplifier. Recommended amplifier power is 20-150 watts RMS per channel.
Does the speaker come with a mounting template?
Yes, each speaker includes a paper cutout template for marking the ceiling before cutting. Use a level to ensure accurate placement.
User questions about PerformaBe C128Be Revel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual PerformaBe C128Be - Revel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PerformaBe C128Be by Revel.
USER MANUAL PerformaBe C128Be Revel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Revel
Model : PerformaBe C128Be
Category : Speaker