LS100-WL - Uncategorized Planet - Free user manual and instructions
Find the device manual for free LS100-WL Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Planet |
| Model | LS100-WL |
| Category | Network Switch |
| Product Type | Ethernet Switch |
| Ports | 5 x 10/100Mbps RJ-45 |
| MAC Address Table | 1K entries |
| Switching Capacity | 1 Gbps |
| Forwarding Rate | 0.744 Mbps (64-byte packets) |
| Power Supply | 5V DC external adapter |
| Power Consumption | 2.5W |
| Dimensions (W x D x H) | 100 x 70 x 22 mm |
| Weight | 0.2 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 5% to 90% non-condensing |
| LED Indicators | Power, Link/Act per port |
| Mounting | Desktop or wall-mountable |
| Standards | IEEE 802.3, 802.3u |
| Features | Auto-negotiation, Auto-MDI/MDIX, Store-and-forward |
| Package Contents | Switch, power adapter, user manual |
| Cooling | Fanless |
Frequently Asked Questions - LS100-WL Planet
How do I connect the LS100-WL to my network?
Connect the power adapter to the switch and a power outlet. Then, use Ethernet cables to connect your devices (computers, routers, etc.) to any of the 5 ports. The switch will automatically negotiate speed and duplex.
Does the LS100-WL support Power over Ethernet (PoE)?
No, the LS100-WL is a standard Ethernet switch and does not support PoE. Each connected device must have its own power source.
How can I reset the switch to factory defaults?
The LS100-WL is an unmanaged switch with no configurable settings, so there is no reset procedure. Power cycling the device (unplugging and re-plugging the power adapter) will restart it.
What is the maximum cable length for connections?
For 10/100Mbps Ethernet, the maximum cable length is 100 meters (328 feet) using standard Cat5e or higher twisted-pair cabling.
Can I mount the LS100-WL on a wall?
Yes, the LS100-WL is designed for both desktop and wall mounting. Use the mounting holes on the bottom or back panel to secure it with screws (not included).
How do I know if the switch is working correctly?
The power LED will be lit when the switch is powered on. Each port has a link/activity LED that lights up when a device is connected and blinks during data traffic.
Is the LS100-WL plug-and-play?
Yes, it is an unmanaged switch, so no configuration is required. Simply connect power and cables, and it will start forwarding traffic immediately.
What should I do if the switch becomes hot?
Ensure the switch is placed in a well-ventilated area and not in direct sunlight or near heat sources. The fanless design relies on passive cooling; if overheating persists, reduce the ambient temperature or improve airflow.
Can I connect the LS100-WL to a router?
Yes, you can connect the switch to any device, including a router. Simply plug an Ethernet cable from a router's LAN port to any port on the switch to extend your network.
What is the warranty period for the LS100-WL?
Planet typically offers a 2-year warranty for networking equipment. Please check with your retailer or Planet's official website for the exact warranty terms.
User questions about LS100-WL Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual LS100-WL - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LS100-WL by Planet.
USER MANUAL LS100-WL Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : LS100-WL
Category : Uncategorized