IGS-10020HPT - Switch Planet - Free user manual and instructions
Find the device manual for free IGS-10020HPT Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Industrial Switch |
| Number of Ports | 10 (8x 10/100/1000BASE-T PoE+ + 2x 100/1000BASE-X SFP) |
| PoE Standard | IEEE 802.3af/at |
| PoE Power Budget | 120W |
| Dimensions (W x D x H) | 440 x 200 x 44 mm |
| Weight | 3.5 kg |
| Power Supply | 100-240V AC, 50/60Hz |
| Maximum Power Consumption | 150W |
| Management Features | VLAN, QoS, SNMP, STP, IGMP Snooping, Link Aggregation |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Enclosure | Metal, IP30 |
| Installation | Rack-mount (19-inch) or DIN-rail mount |
| Safety | Do not open the device; refer servicing to qualified personnel |
| Cleaning | Wipe with a dry, lint-free cloth; do not use liquids |
| Spare Parts & Repairability | Contact Planet support for spare parts; device is not user-serviceable |
| General Information | Product manual available for free download at notice-facile.com |
Frequently Asked Questions - IGS-10020HPT Planet
How do I reset the Planet IGS-10020HPT to factory defaults?
Press and hold the reset button on the front panel for 10 seconds while the device is powered on. The switch will reboot with factory settings.
What is the maximum PoE power per port on the IGS-10020HPT?
Each PoE port can deliver up to 30W (IEEE 802.3at) with a total budget of 120W.
How do I configure VLANs on this switch?
Access the web management interface through the default IP address (192.168.0.100). Go to VLAN settings to create and assign VLANs. Refer to the manual for details.
Can I use the SFP ports for uplink?
Yes, the two SFP slots support 100/1000BASE-X transceivers and can be used for fiber uplink connections.
Is the IGS-10020HPT suitable for outdoor use?
No, this switch is designed for indoor use only. Operating temperature range is 0°C to 50°C and humidity 10% to 90%.
How do I update the firmware?
Download the latest firmware from Planet's website. Log into the web interface, go to System > Firmware Upgrade, and upload the file. Do not power off during update.
What is the default login for the web interface?
Default username is admin and password is admin. Change it immediately after first login.
Does this switch support SNMP?
Yes, it supports SNMP v1/v2c/v3 for network monitoring and management.
Can I mount the switch on a DIN rail?
Yes, the IGS-10020HPT comes with a DIN-rail kit as standard accessory.
What do the LED indicators mean?
PWR (green): power on. PoE (amber): PoE active. LNK/ACT (green): link established and activity. SYS (green): system status. See manual for complete description.
User questions about IGS-10020HPT Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual IGS-10020HPT - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IGS-10020HPT by Planet.
USER MANUAL IGS-10020HPT Planet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Planet
Model : IGS-10020HPT
Category : Switch