Hydrostar MK4 - Heat pump Waterco - Free user manual and instructions
Find the device manual for free Hydrostar MK4 Waterco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Waterco |
| Model | Hydrostar MK4 |
| Product Type | Heat Pump |
| Application | Pool Heating |
| Dimensions (L x W x H) | Approx. 1000 x 400 x 600 mm |
| Weight | Approx. 45 kg |
| Power Supply | 230 V / 50 Hz |
| Heating Capacity | Up to 10 kW (depending on conditions) |
| COP (Coefficient of Performance) | Up to 5.5 |
| Refrigerant | R410A |
| Operating Temperature Range | -10°C to 43°C |
| Sound Level (at 1m) | < 55 dB(A) |
| Water Flow Rate | Min. 3 m³/h |
| Connection Size | 50 mm (2 inch) |
| Controls | Digital display with thermostat |
| Defrost System | Automatic reverse cycle |
| Filter | Removable washable filter |
| Maintenance | Clean filter regularly; check refrigerant annually |
| Safety Features | Overload protection, high-pressure switch, anti-freeze |
| Certifications | CE, RoHS |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - Hydrostar MK4 Waterco
What is the recommended installation location for the Hydrostar MK4?
Install the heat pump outdoors on a level, stable surface with good ventilation. Ensure it is placed away from obstructions and at least 1 meter from walls to allow proper airflow.
How do I clean the filter of the Hydrostar MK4?
Turn off the unit, remove the filter cover, take out the filter, and rinse it with a hose. Let it dry completely before reinstalling. Clean every 2 weeks during peak season.
What type of refrigerant does the Hydrostar MK4 use?
The unit uses R410A refrigerant, which is environmentally friendly and efficient.
Can the Hydrostar MK4 be used for cooling as well?
Yes, the Hydrostar MK4 is a reverse-cycle heat pump, so it can both heat and cool your pool water.
What is the power supply requirement for the Hydrostar MK4?
It requires a 230V / 50Hz single-phase power supply. A dedicated circuit with a suitable breaker is recommended.
How often should I service my Hydrostar MK4 heat pump?
Annual servicing by a qualified technician is recommended. This includes checking refrigerant levels, electrical connections, and cleaning the coils.
What is the COP of the Hydrostar MK4?
The Coefficient of Performance (COP) is up to 5.5, meaning it produces 5.5 kW of heat for every 1 kW of electricity consumed.
How do I reset the Hydrostar MK4 if it shows an error?
Turn off the unit at the main power switch, wait 5 minutes, then turn it back on. If the error persists, consult the manual or contact customer support.
Can I install the Hydrostar MK4 myself?
Installation should be performed by a qualified professional to ensure proper electrical and plumbing connections, and to comply with local regulations.
What is the noise level of the Hydrostar MK4?
The sound level is less than 55 dB(A) at 1 meter, making it relatively quiet during operation.
User questions about Hydrostar MK4 Waterco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heat pump in PDF format for free! Find your manual Hydrostar MK4 - Waterco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Hydrostar MK4 by Waterco.
USER MANUAL Hydrostar MK4 Waterco
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Waterco
Model : Hydrostar MK4
Category : Heat pump